Toshiba Teli USB3 Vision Camera BU160M Series / BU040M Series

New USB3 Vision Camera 1.6 226MP fps BU160M Series 0.4 437MP fps BU040M Series Low Pix., High fps Instead of CCD 29 ✕ 29 ✕ 16 mm 33 Feature Super high speed response with new IP Core ‘TELI Core Technology’ With Sony’s ultra high image quality global shutter type CMOS sensor 1.6M (IMX273) : 226 fps / 1,440(H) x 1,080(V) pixels 0.4M (IMX287) : 437 fps / 720(H) x 540(V) pixels Pixel size : BU160M = 3.45(H) x 3.45(V) μm BU040M = 6.90(H) x 6.90(V) μm Correspond with “TeliCamSDK” (Soware development kit, free supply) Pregius logo is trademark of Sony Corporation.

Specifications B/W or COLOR B/W COLOR B/W COLOR Pixels 0.4 M 1.6 M ITEM MODEL BU040M BU040MCG BU160M BU160MCG BU040MG BU040MCF BU160MG BU160MCF Interface USB 3.0 (Only SuperSpeed is supported) Protocol USB3 Vision (Ver1.0) Imager 1/2.9 type GS-CMOS (IMX287) 1/2.9 type GS-CMOS (IMX273) Resolution 720 (H) X 540 (V) 1,440 (H) X 1,080 (V) Max. Frame Rate Mono 8 : 437 fps Bayer 8, Mono 8 : 437 fps Bayer 8, Mono 8 : 226 fps (all pixels readout) Mono 10 / 12 : 320 fps YUV, Bayer 10 / 12 : 320 fps Mono 8 : 226 fps RGB, BGR : TBD fps Mono 10 / 12 : 128 fps YUV, Bayer 10 / 12 : 128 fps RGB, BGR : TBD fps Pixel Size 6.90 (H) X 6.90 (V) μm 3.45 (H) X 3.45 (V) μm Scan Method Progressive Aspect Ratio 4 : 3 4 : 3 Electronic Shutter MANUAL (Global Shutter) / Random Trigger Shutter (Global Shutter) Random Trigger Shutter Type External Trigger / Soware Trigger Random Trigger Shutter Mode Edge / Level / Bulk (255 times) Sequential Shutter 16 entries (max) Exposure Time 30 μs to 16 s (MANUAL), 30 μs to 1 s (AE), 30 μs to 16 s (Edge or Bulk Mode), Trigger width (Level Mode) Synchronization System Internal / Bus (USB) On-chip Color Filter - RGB primary color mosaic - RGB primary color mosaic Dust-proof Glass / IR Cut Filter M : None MCG : Dust-proof Glass M : None MCG : Dust-proof GlassMG : Dust-proof Glass MCF : with IR Cut Filter MG : Dust-proof Glass MCF : with IR Cut Filter Standard Sensitivity 2,800 lx, F5.6, 1/500 s MCG : 2,300 lx, F5.6, 1/500 s(Gain : 0dB) MCF : 2,500 lx, F5.6, 1/500 s 3,000 lx, F4, 1/250 s MCG : TBD lx, F4, 1/250 s MCF : TBD lx, F4, 1/250 s Minimum Sensitivity 6 lx MCG : 1 lx, MCF : 3 lx 12 lx MCG : TBD lx, MCF : TBD lx (Video Level:50%) (F1.4, Gain +24 dB) (F1.4, Gain +36 dB) (F1.4, Gain +24 dB) (F1.4, Gain +36 dB) Gain (Analog) 0 to +24 dB (MANUAL, AGC) 0 to +36 dB (MANUAL, AGC) 0 to +24 dB (MANUAL, AGC) 0 to +36 dB (MANUAL, AGC) Black Level -25 to +25 % White Balance - Manual, One push - Manual, One pushMCG : not specify, MCF : 2,500 to 6,500 K MCG : not specify, MCF : 2,500 to 6,500 K Gamma / LUT γ=1.0 to 0.45 / In 12 bit, Out 12 bit Sharpness - ✔ - ✔ Color Matrix Correction - ✔ - ✔ ALC (AE + AGC) Control ✔ Test Pattern ✔ Image Buer / Number of Frames 256 MB / 690 frames (all pixels readout) 256 MB / 172 frames (all pixels readout) Image Time Stamp ✔ Event Nortification FrameTrigger, FrameTriggerError, FrameTriggerWait, FrameTransferStart, FrameTransferEnd, ExposureStart, ExposureEnd, Timer0Start, Timer0End Chunk FrameBurstTriggerCount, ExposureTime, Gain, LineStatusAll, SequentialShutterNumber, SequentialShutterElement, UserArea (256 Bytes), etc. Mono 8 / 10 / 12 bit RGB 24 bit, BGR 24 bit, RGB 24 bit, BGR 24 bit, All pixel, Scalable, YUV411 12 bit, YUV422 16 bit, Mono 8 / 10 / 12 bit YUV411 12 bit, YUV422 16 bit, Image Output Format All pixel, Scalable,Binning, Decimation, Bayer 8 / 10 / 12 bit, Mono 8 bit Binning, Decimation, Bayer 8 / 10 / 12 bit, Mono 8 bit Mirroring, Flip All pixel, Scalable, Binning, Mirroring, Flip All pixel, Scalable, Binning,Decimation, Mirroring, Flip Decimation, Mirroring, Flip External Trigger Input / Level 1 channel / LVTTL to +24 V GPIO Input Output / Level In / Out : 1 channel (selectable) / 5 V CMOS (each), Out : 1 channel / 5 V CMOS Power Supply DC +5 V ± 5 % (from USB connector) Power Consumption 2.2 W 3.2 W 2.4 W (TBD) W Lens Mount C Mount Dimensions / Mass 29 (W) × 29 (H) × 16 (D) mm (Not including protrusion) / 33 g Operation Assurance Temperature : 0 ℃ to 40 ℃ (below 60 ℃ on cabinet surface), Humidity : 10 % to 90 % (no condensation) Conformity CE, FCC, RoHS, WEEE, GenICam (Ver2.4 and Ver3.0), IIDC2 (Ver1.1.0) Product Availability Available Available Available (Planning) For replacing CCD camera Using Binning High speed frame rate Equivalent optical features make easy Binning feature with constant BU030 (0.3Mp CCD) BU130 (1.3Mp CCD) replacement! image area achieves multi-purpose use. Number and size of pixels are unchanged 120fps 30fps BU160M (1.6Mp CMOS) BU030 (0.3Mp CCD) BU040M (0.4Mp CMOS) 1,440 8.33ms 33.3ms 640 720 3.45μm 2 226 fps 1 7.4μm2 1/2 2/ . 6.9μm 5 3ty 6 9 ty BU040M (0.4Mp CMOS) BU160M (1.6Mp CMOS).92 pe .21 pm em mm 437fps 226fps Binning BU130 (1.3Mp CCD) BU160M (1.6Mp CMOS) 2x2 1,280 1,440 720 2.29ms 4.42ms 433 2 1 1 6.9μm fps Higher speed feature than CCD camera achieves higher speed image /3 3.75μm 2 /2 3.45μm2 6 ty 6 .9 ty processing system for alignment, character inspection etc. .00 pm e .21m pe BU040Mm m equivalent output is 960 frames per 1.58 second can be shot with image buer. possible. More high speed fps output with scalable, binning*1 and decimation*2 features. *1, *2︓ Only for BU160M Before using this product, please read “Operation Manual“ carefully in order to use this product Notes on Safety afely and correctly.If this product should be used in the extraordinary conditions or environments, or if you have any questions or problems, please contact our sales division. teli camera Search ● The information of this catalog at the time of August 2019. 4000-0118-1908 ● The information of this catalog is subject to change without notice. Please see our website or ask sales division. ● Company name, product name or logo might be trademark or registered trademark of each company or organization. 960 480 1,080 540 540 1,080