Hirose Electric ZE05 Series

NEW ZE05 Series ●High Vibration Resistance Terminal Design ①Double-Layered Spring Design Suppresses outer vibration by increasing the contact force Double-Layered Spring ■Features 1. Space-saving (0.5 size terminal, 2mm pitch) ②3-point contact design Space-saving design that contributes to size reduction of end product Suppresses outer vibration by increasing 2. High Heat Resistance : up to 125℃ the contact force1 spring+ 2 beats= 3 contact points Suitable for use in 125℃ environments. 3. High Vibration Resistance Can be used in vehicle environments in which intense vibration is applied. 4. Rated Current : 5A (Mono-Pole Power Supply/ 2A (All-Pole Power Supply) Suitable for use in 125℃ environments. 5. Retainer Guarantees 40N Tensile Strength Durable against cable routing 1 Spring 2 Beats *The terminal is fl ipped upside down so the beat is easier to see. ●High Tensile Strength due to Retainer Tensile Strength of 40N Secured 2020.4 1 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Product Specifi cations Rated Current : 2A (all-pole power supply) Operating Temperature : -40 to +125℃ 5A (mono-pole power supply) Storage Temperature Range : -10 to +60℃ (Note 1) Ratings Storage Relative Humidity Range : 85% RH or less Rated Voltage : 60V AC/DC (No condensation) (Note 1) Items Specifications Conditions 1. Contact Resistance 10mΩ Max. Measured at 1A DC 2. Insulation Resistance 100MΩ Min. Measured at 500V DC There shall be no dielectric 3. Withstanding Voltage Voltage of 1000V AC for 1 min. breakdown. 4. Mating Durability Contact Resistance : 20mΩ Max. 30 Insertion/Extraction cycles No electrical discontinuity of 1μs or Frequency : 20 to 200Hz (Constant Acceleration 5. Vibration Resistance more. of 88m/s2) Contact Resistance : 20mΩ Max. 1 Cycle 3 min. (round trip), 3 hours in 3 directions Lock breaking strength measured when pulling in 6. Lock Strength 100N Min. mating axis direction Contact Resistance : 20mΩ Max. ． Ω Left for 96 hours at a temperature of 60℃ and a 7 Humidity Resistance Insulation Resistance : 100M relative humidity humidity 90 to 95% Min. Temperature : -40°C → Room temperature → 8. Thermal Shock Contact Resistance : 20mΩ Max. 125°C → Room temperature Time: 30 → 5 → 30 → 5 minutes for 1000 cycles 9. Heat Resistance Contact Resistance : 20mΩ Max. Left at 140℃ for 120 hours 10． Cold Resistance Contact Resistance : 20mΩ Max. Left at -40℃ for 120 hours Left in sulfuric acid gas at room temperature with 11． Sulfuric Acid Gas Resistance Contact Resistance : 20mΩ Max. a concentration of 25ppm and 75% or more RH for 96 hours while unmated Note 1 : This storage temperature and humidity is for long-term storage of unused products. ■Materials / Finish Component Part Material Finish UL Standard Housing PA Resin Black UL94V-0 Receptacle Terminal Brass Tin Plating － Solder Tabs Brass Tin Plating － Housing PA Resin Black UL94V-0 Plug Retainer PA Resin Natural UL94V-0 Crimp Terminal Terminal Copper Alloy Tin Plating － 2 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders.　 ●Receptacle ❶Series Name ：ZE05 ZE05 H - 12 D P - 2 H ❷Solder Tabs H： SMT　N/A： DIP❸No. of Pos. ： 2、4、5、8、12、16、20、24 ❶ ❷ ❸ ❹ ❺ ❻ ❼ ❹Rows D： 2 Rows N/A : 1 Row ❺Connector Type P： Receptacle S： Plug ●Plug ❻Pitch 2： 2mm ZE05 - 12 D S - HU/R H : Right Angle❼Part Type V : Straight ❶ ❸ ❹ ❺ ❼ HU/R : Housing/Retainer ●Crimp Terminal ❶Series Name ：ZE05 ZE05 - 2022 SCF ❷Applicable Cable Size 2022 ： 20, 22 AWG (0.3-0.5SQ)❸Form Type/ Packaging SCF ： Female terminal, Reel ❶ ❷ ❸ Combination Chart ●Receptacle ZE05H-**P-2H ●Plug ●Crimp Contact ZE05-**P-2H ZE05-**S-HU/R ZE05-2022SCF ZE05H-**P-2V ZE05-**P-2V 3 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Right Angle Receptacle, SMT Solder Tabs A±0.2 1±0.2 C±0.3 B±0.3 Unit : mm Part No. HRS No. No. of Pos. A B C D ZE05H-2P-2H 752-2109-0 2 2 12.32 13.7 ZE05H-4P-2H 752-2110-0 4 6 16.32 17.7 8.34 ZE05H-5P-2H 752-2120-0 5 8 18.32 19.7 ZE05H-8DP-2H 752-2112-0 8 10 18.52 19.9 ZE05H-12DP-2H 752-2113-0 12 14 22.52 23.9 ZE05H-16DP-2H 752-2114-0 16 20 28.52 29.9 8.84 ZE05H-20DP-2H 752-2115-0 20 26 34.52 35.9 ZE05H-24DP-2H 752-2116-0 24 30 38.52 39.9 ■Right Angle Receptacle, DIP Solder Tabs A±0.2 1±0.2 B±0.3 C±0.3 Unit : mm Part No. HRS No. No. of Pos. A B C D ZE05-2P-2H 752-2100-0 2 2 12.32 9.9 ZE05-4P-2H 752-2101-0 4 6 16.32 13.9 8.34 ZE05-5P-2H 752-2121-0 5 8 18.32 15.9 ZE05-8DP-2H 752-2103-0 8 10 18.52 16.1 ZE05-12DP-2H 752-2104-0 12 14 22.52 20.1 ZE05-16DP-2H 752-2105-0 16 20 28.52 26.1 8.84 ZE05-20DP-2H 752-2106-0 20 26 34.52 32.1 ZE05-24DP-2H 752-2107-0 24 30 38.52 36.1 Note 1 : The sales unit is 1 reel (300pcs/ reel). Please order by number of reels. 4 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. D±0.3 2.1 D±0.3 14.8±0.5 14.8±0.5

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Straight Receptacle, SMT Solder Tabs C±0.3 B±0.2 2±0.2 2±0.2 A±0.2 E±0.3 Unit : mm Part No. HRS No. No. of Pos. A B C D E ZE05H-2P-2V 752-2309-0 2 2 - 14.6 13.22 10 ZE05H-4P-2V 752-2310-0 4 6 - 18.6 17.22 ZE05H-8DP-2V 752-2312-0 8 10 8 20.8 19.42 ZE05H-12DP-2V 752-2313-0 12 14 12 24.8 10.5 23.42 ZE05H-24DP-2V 752-2316-0 24 30 28 40.8 39.42 ■Straight Receptacle, DIP Solder Tabs B±0.2 2±0.2 2±0.2 A±0.2 E±0.3 C±0.3 Unit : mm Part No. HRS No. No. of Pos. A B C D E ZE05-2P-2V Under Development (Note 3) 2 2 - 10.8 13.22 10 ZE05-4P-2V Under Development (Note 3) 4 6 - 14.8 17.22 ZE05-8DP-2V Under Development (Note 3) 8 10 8 17 19.42 ZE05-12DP-2V Under Development (Note 3) 12 14 12 21 10.5 23.42 ZE05-24DP-2V Under Development (Note 3) 24 30 28 37 39.42 Note 1 : The sales unit is 1 reel (250pcs/ reel). Please order by number of reels. Note 2 : Suction tape is attached as a standard. Note 3 : Pin counts with the HRS No. left blank are currently under development. For details contact a Hirose sales representative. 5 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 13.2±0.3 D±0.5 2.1 13.2±0.3 D±0.5

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Plug A±0.5 Unit : mm Part No. HRS No. No. of Pos. No. of Packages A B C ZE05-2S-HU/R 752-2200-0 2 350 8.8 ZE05-4S-HU/R 752-2201-0 4 350 12.8 9.7 5.3 ZE05-5S-HU/R 752-2211-0 5 350 14.8 ZE05-8DS-HU/R 752-2203-0 8 385 13.6 ZE05-12DS-HU/R 752-2204-0 12 350 17.6 ZE05-16DS-HU/R 752-2205-0 16 280 23.6 10.2 6.44 ZE05-20DS-HU/R 752-2206-0 20 245 29.6 ZE05-24DS-HU/R 752-2207-0 24 210 33.6 Note 1 : The product is sold in sets so please order based on number of sets. 6 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. B±0.5 15.3±0.5 0.6±0.3 C±0.3

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector ■Crimp Terminal for Plug 1.3±0.3 1.33±0.3 5.6±0.1 Part No. HRS No. Type Quantity Finish ZE05-2022SCF 752-2001-0 Reel Terminal 10,000pcs/reel Tin Plating Note 1 : Please consult with a Hirose sales representative when considering cables other than the applicable cables. Note 2 : Contact a Hirose sales representative regarding the usability of crimping tools made by other companies. ■Applicable Crimping Tool Type Part No. ＨＲＳ Ｎo. Applicable Cable Applicable Contact Hirose Crimping Tool CM-105C 901-0001-0 － － Applicator for AP105-ZE05-2022S 901-5239-0 － Hirose Crimping Tool ZE05-2022SCF Japan Automatic Machine CHX022700H － － Applicator (Note 1) Hand Tool (Note 2) HT802/ZE05-2022S 780-0045-0 0.3sq, 0.5sq (Note 3) ZE05-2022SCF (Note 4) Retainer Release Tool ZE05-2DC-HU/R/RE-MD 902-5144-0 － － (Ｎｏｔｅ 5) ZE05-12DC-HU/R/RE-MD 902-5143-0 － － Terminal Extraction Tool ZE05/RE-MD 902-5145-0 － ZE05-2022SCF Note 1 : Contact Japan Automatic Machine (J.A.M) regarding crimping failure relating to applicable J.A.M. applicators or for other applicator inquiries via the J.A.M. website. (URL : http://www.jam-net.co.jp) Note 2 : Hand tools are developed as a prototype tool during product development. Use an applicator for mass production. Note 3 : Applicable cables are limited to those listed in the table. Note 4 : Cut the reel terminal for use with the hand tool. Applicable contacts are limited to those listed in the table. Note 5 : Contact a Hirose representative about the retainer release tool for 20 and 24pos. ZE05-2DC-HU/R/RE-MD …Single row products only (2, 4, 5pos.) ZE05-12DC-HU/R/RE-MD …2 row products only (8, 12, 16pos.) Note 6 : Conduct crimping based on the "Crimping Standards" and "Crimping Conditions Table". Note 7 : Problems with tools not specified by Hirose are outside the scope of warranty. 7 Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 13.24±0.5 16.44±0.5

ZE05 Series●High Heat and Vibration Resistance, 0.5 Size, 2mm pitch Automotive Interface Connector □Usage Precautions 1. Excessive pull force during unmating may damage the connector. If it is difficult to remove, push in lightly once and then release the lock. 2. Always make sure to turn off the power before reseating the connector. 3. Do not have direct contact on the terminal when electricity is flowing since it is extremely dangerous. 4. Contact a Hirose representative for harness procedures or handling manuals. Temperature（ ℃） ・Recommended Temperature Profile (Right Graph) 250 　Reflow Heating Method Used 230 　　　 ： 　　 Far infrared, air atmosphere or nitrogen 　 200Reflow Cycles : 2 times 　Peak Temperature : 250℃ 180 30±10s 　230℃ Min. : 20 to 40s 150 　Preheat Temperature : 150 to 180℃ 90 to 120s 90 to 120s 100 ・Hand Solder/ Solder Iron Temperature : 280 to 300℃ for 2 seconds or less ・Terminal co-planarity is 0.1mm Max. ・Recommended board thickness : T=1.6mm ・Recommended solder thickness : 0.15mm 0 Time（ s） ® 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com 8 The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.The contents of this catalog are current as of date of 04/2020. Contents are subject to change without notice for the purpose of improvements. Jun.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.