5.0SMDJ Series Surface Mount – 5000W

TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W RoHS Pb e3 Description The 5.0SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features & Benefits ■ 5000W peak pulse power ■ Excellent clamping capability Bi-directional capability at 10/1000μs ■ L ow incremental surge waveform, repetition rate (duty resistance cycles):0.01% ■ Typical IR less than 5μA when ■ SMD low profile surface VBR min>22V mount package minimizing PCB footprint ■ High temperature to reflow soldering guaranteed: ■ Typical failure mode is short 260°C/40sec Additional Information from over-specified voltage or current ■ VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature ■ Whisker test is conducted Coefficient,) based on JEDEC JESD201A per its table 4a and 4c ■ UL Recognized compound meeting flammability rating V-0 ■ IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact) ■ Meet MSL level1, per J-STD-020, LF maximun peak Resources Accessories Samples ■ ESD protection of data lines in of 260°C accordance with IEC 61000- 4-2 ■ Matte tin lead–free plated ■ EFT protection of data lines in ■ Halogen free and RoHS Agency Approvals accordance with IEC 61000- compliant 4-4 ■ Pb-free E3 means 2nd level Agency Agency File Number ■ Built-in strain relief interconnect is Pb-free and the terminal finish material is E230531 ■ Glass passivated chip junction tin(Sn) (IPC/JEDEC J-STD- ■ Fast response time: typically 609A.01) less than 1.0ps from 0V to BV ■ Recognized to UL 497B as an Maximum Ratings and Thermal Characteristics min Isolated Loop Circuit Protector (T O A=25 C unless otherwise noted) Parameter Symbol Value Unit Applications Peak Pulse Power Dissipation at TL=25OC TVS devices are ideal for the protection of I/O Interfaces, VCC bus by 10/1000µs Waveform (Fig.2)(Note 1), PPPM 5000 W and other vulnerable circuits used in Telecom, Computer, Industrial (Note 2) and Consumer electronic applications. Power Dissipation on Infinite Heat Sink at T =50OC PD 6.5 W L Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A Functional Diagram Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only VF 5.0 V Operating Temperature Range TJ -65 to 150 °C Storage Temperature Range TSTG -65 to 175 °C Bi-directional Typical Thermal Resistance Junction to Lead RƟJL 15 °C/W Typical Thermal Resistance Junction to Cathode Anode Ambient RƟJA 75 °C/W Notes: Uni-directional 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle = 4 per minute maximum. © 2021 Littelfuse, Inc. 1 Specifications are subject to change without notice. Revised: GD.07/22/21

TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Electrical Characteristics (TA=25°C unless otherwise noted) Test Maximun Maximum Maximum Maximum Reverse Breakdown Maximum Clamping Peak Clamping Peak Maximum Agency Part Part Marking Reverse Stand off Voltage VBR Current Voltage Pulse Voltage Pulse Temperature Approval Number Number (Volts) @ I Leakage Voltage VR T I VC@IPP Current I (Uni) (Bi) T PP VC@IPP Current Coefficient I @V (Volts) (10/1000μs) (10/1000μs) (8/20µs) IPP(8/20μs) R R of VBR (%/C) Uni Bi Min. Max. (mA) (µA) (V) (A) (V) (A) 5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.3 14.7 10 19.9 252.0 25.7 1890.0 800 0.075 X 5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.4 15.9 10 21.5 233.0 27.8 1747.5 500 0.076 X 5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.6 17.2 10 23.2 216.0 30.0 1620.0 200 0.08 X 5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.7 18.5 1 24.4 205.0 31.5 1537.5 100 0.083 X 5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17.8 19.7 1 26.0 193.0 33.6 1447.5 50 0.084 X 5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 17.0 18.9 20.9 1 27.6 181.0 35.7 1357.5 20 0.085 X 5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.0 22.1 1 29.2 172.0 37.7 1290.0 10 0.088 X 5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.2 24.5 1 32.4 155.0 41.9 850.0 5 0.091 X 5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.4 26.9 1 35.5 141.0 45.9 1057.5 5 0.092 X 5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.7 29.5 1 38.9 129.0 50.3 967.5 5 0.092 X 5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.9 31.9 1 42.1 119.0 54.4 892.5 5 0.093 X 5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.1 34.4 1 45.4 110.0 58.7 825.0 5 0.094 X 5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.3 36.8 1 48.4 103.0 62.5 772.5 5 0.096 X 5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.7 40.6 1 53.3 93.9 68.9 704.3 5 0.097 X 5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.0 44.2 1 58.1 86.1 75.1 645.8 5 0.098 X 5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.4 49.1 1 64.5 77.6 83.3 582.0 5 0.099 X 5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.8 52.8 1 69.4 72.1 89.7 540.8 5 0.1 X 5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.0 55.3 1 72.7 68.8 93.9 516.0 5 0.101 X 5.0SMDJ48A 5.0SMDJ48CA 5PFX 5BFX 48.0 53.3 58.9 1 77.4 64.7 100.0 485.3 5 0.101 X 5.0SMDJ51A 5.0SMDJ51CA 5PFZ 5BFZ 51.0 56.7 62.7 1 82.4 60.7 106.5 455.3 5 0.101 X 5.0SMDJ54A 5.0SMDJ54CA 5PGE 5BGE 54.0 60.0 66.3 1 87.1 57.5 112.5 431.3 5 0.102 X 5.0SMDJ58A 5.0SMDJ58CA 5PGG 5BGG 58.0 64.4 71.2 1 93.6 53.5 120.9 401.3 5 0.103 X 5.0SMDJ60A 5.0SMDJ60CA 5PGK 5BGK 60.0 66.7 73.7 1 96.8 51.7 125.1 387.8 5 0.103 X 5.0SMDJ64A 5.0SMDJ64CA 5PGM 5BGM 64.0 71.1 78.6 1 103.0 48.6 133.1 364.5 5 0.104 X 5.0SMDJ70A 5.0SMDJ70CA 5PGP 5BGB 70.0 77.8 86.0 1 113.0 44.3 146.0 332.3 5 0.105 X 5.0SMDJ75A 5.0SMDJ75CA 5PGR 5BGR 75.0 83.3 92.1 1 121.0 41.4 156.3 310.5 5 0.106 X 5.0SMDJ78A 5.0SMDJ78CA 5PGT 5BGT 78.0 86.7 95.8 1 126.0 39.7 162.8 297.8 5 0.106 X 5.0SMDJ85A 5.0SMDJ85CA 5PGV 5BGV 85.0 94.4 104.0 1 137.0 36.5 177.0 273.8 5 0.106 X 5.0SMDJ90A 5.0SMDJ90CA 5PGX 5BGX 90.0 100.0 111.0 1 146.0 34.3 188.6 257.3 5 0.107 X 5.0SMDJ100A 5.0SMDJ100CA 5PGZ 5BGZ 100.0 111.0 123.0 1 162.0 30.9 209.3 231.8 5 0.107 X 5.0SMDJ110A 5.0SMDJ110CA 5PHE 5BHE 110.0 122.0 135.0 1 177.0 28.3 228.7 212.3 5 0.107 X 5.0SMDJ120A 5.0SMDJ120CA 5PHG 5BHG 120.0 133.0 147.0 1 193.0 26.0 249.4 195.0 5 0.108 X 5.0SMDJ130A 5.0SMDJ130CA 5PHK 5BHK 130.0 144.0 159.0 1 209.0 24.0 270.0 180.0 5 0.108 X 5.0SMDJ140A 5.0SMDJ140CA 5PHL 5BHL 140.0 156.0 172.0 1 226.1 22.2 292.1 166.5 5 0.108 X 5.0SMDJ150A 5.0SMDJ150CA 5PHM 5BHM 150.0 167.0 185.0 1 243.0 20.6 314.0 154.5 5 0.108 X 5.0SMDJ160A 5.0SMDJ160CA 5PHP 5BHB 160.0 178.0 197.0 1 259.0 19.3 334.6 144.8 5 0.108 X 5.0SMDJ170A 5.0SMDJ170CA 5PHR 5BHR 170.0 189.0 209.0 1 275.0 18.2 355.3 136.5 5 0.108 X For bidirectional type having VR of 20 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred. © 2021 Littelfuse, Inc. 2 Specifications are subject to change without notice. Revised: GD.07/22/21

TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W I-V Curve Characteristics Uni-directional Bi-directional Ipp IT Vc VBR VR V Vc VBR VR IR IR VF I V R I VR VBR Vc T IT Ipp Ipp PPPM Peak Pulse Power Dissipation -- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1: Figure 2: TVS Transients Clamping Waveform Peak Pulse Power Rating Voltage Transients 1000 TJ initial = Tamb Voltage Across TVS 100 5kW at 10/1000µs, 25°C Current Through TVS 10 1 0.001 0.01 0.1 1 10 Time td-Pulse Width (ms) © 2021 Littelfuse, Inc. 3 Specifications are subject to change without notice. Revised: GD.07/22/21 Voltage or Current PPPM-Peak Pulse Power (KW)

TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) Figure 3: Figure 4: Peak Pulse Power Derating Curve Pulse Waveform 100 150 tr=10µsec TJ=25°C Pulse Width(td) is defined 80 as the point where the peak Peak Value current decays to 50% of IPPM 100 IPPM 60 Half Value IPPM IPPM 40 ( 2 ) 50 10/1000µsec. Waveform as defined by R.E.A 20 0 td 0 25 50 75 100 125 150 175 0 0 1.0 2.0 3.0 4.0 TJ - Initial Junction Temperature (ºC) t-Time (ms) Figure 5: Figure 6: Typical Junction Capacitance Typical Transient Thermal Impedance 100000 100 0 10000 Bi-direc l V=0V 10 1000 Uni/Bi-direc l V=V 1 R 100 0.1 10 0.01 1 0.001 0.01 0.1 1 10 100 1000 10 100 1000 TP - Pulse Duration (s) VBR - Reverse Breakdown Voltage(V) Figure 7: Figure 8: Maximum Non-Repetitive Peak Forward Peak Forward Voltage Drop Surge Current Uni-Directional Only vs Peak Forward Current (Typical Values) 450 100 5.0SMDJ20A 400 350 10 300 250 1 200 150 0.1 100 50 0.01 0 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 1 10 100 Number of Cycles at 60 Hz VF-Peak Forward Voltage(V) © 2021 Littelfuse, Inc. 4 Specifications are subject to change without notice. Revised: GD.07/22/21 IFSM - Peak Forward Surve Current(A) Cj(pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % IF-Peak Forward Current(A) Transient Thermal Impedance (°C/W) IPPM- Peak Pulse Current, % IRSM

TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Soldering Parameters Reflow Condition Lead–free assembly - Temperature Min (Ts(min)) 150°C Pre Heat - Temperature Max (Ts(max)) 200°C tp TP - Time (min to max) (ts) 60 – 180 secs Ramp-up Critical Zone T to T Average ramp up rate (Liquidus Temp (TA) to peak 3°C/second max L P TL tL TS(max) to TA - Ramp-up Rate 3°C/second max Ts(max) - Temperature (TL) (Liquidus) 217°C Reflow Ramp-down - Time (min to max) (tL) 60 – 150 seconds Ts(min) ts Peak Temperature (T ) 260+0/-5 °C Preheat P Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds 25˚C Ramp-down Rate 6°C/second max t 25˚C to Peak Time (t) Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Environmental Specifications Weight 0.007 ounce, 0.21 grams High Temp. Storage JESD22-A103 JEDEC DO214AB. Molded component HTRB Case JESD22-A108 over glass passivated junction Temperature Cycling JESD22-A104 Color band denotes positive end (cathode) Polarity MSL except Bidirectional. JEDEC-J-STD-020, Level 1 Matte Tin-plated leads, Solderable per H3TRB JESD22-A101 Terminal JESD22-B102 RSH JESD22-A111 Dimensions Inches Millimeters Dimensions DO-214AB (SMC J-Bend) Min Max Min Max Cathode Band A 0.114 0.126 2.900 3.200 (for uni-directional products only) B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 C D 0.079 0.103 2.060 2.620 A E 0.030 0.060 0.760 1.520 F - 0.008 - 0.203 B G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 H I 0.129 - 3.300 - J 0.094 - 2.400 - D J K L K - 0.165 - 4.200 L 0.094 - 2.400 - F E G I Dimensions in inches and (millimeters) Solder Pads (all dimensions in mm) © 2021 Littelfuse, Inc. 5 Specifications are subject to change without notice. Revised: GD.07/22/21 Temperature (T)

TVS Diode Datasheet 5.0SMDJ Series Surface Mount – 5000W Part Numbering System Part Marking System 5.0SMDJ XXX C A Cathode Band (for uni-directional products only) Littelfuse Logo 5% VBR Voltage Tolerance Bi-Directional XXX Marking Code V Voltage YMXXX R Trace Code Marking Series Y:Year Code M: Month Code XXX: Lot Code Packaging Options Component Packaging Part number Quantity Packaging Specification Package Option 5.0SMDJxxxXX DO-214AB 3000 Tape & Reel - 16mm tape/13” reel EIA STD RS-481 5.0SMDJxxxXX-T7 DO-214AB 500 Tape & Reel – 16mm tape/7” reel EIA STD RS-481 Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 0.059 Cover tape (8.0) (1.5) DIA Optional 7” 7.0 (187) 13” 13.0 (330) Dimensions are in inches 0.80 (20.2) (and millimeters). Arbor Hole Dia. 0.65 Direction of Feed (16.4) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. 6 Specifications are subject to change without notice. Revised: GD.07/22/21 F