Vishay Techno CDMM

CDMM www.vishay.com Vishay Techno Molded Thick Film Divider, High Voltage, High Precision, Surface-Mount FEATURES • High voltage up to 1500 V utilizing thick fil m technology Available • Precision to ± 0.5 % with low TCR tracking t o 10 ppm/°C utilizing thick film technology • Sulfur resistant • Automotive compliant terminations • AEC-Q200 qualified LINKS TO ADDITIONAL RESOURCES • Wide range of resistance value and ratios 3 • 12.5 mm creepage distance. Rated 1250 V per IEC 60664-1 3D D 3D Models • PATENT(S): www.vishay.com/patents • Material categorization: for definitions of complianc e please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER MAXIMUM RESISTANCE GLOBAL CASE RATING WORKING RANGE TOLERANCE (3) RATIO RATIO TCR (4) TRACKING MODEL SIZE P VOLTAGE (1) R (2) R1 RANGE TOL. 70 °C 1 W V Ω ± % (R1 + R2) / R2 ± % (-55 °C to +155 °C) ± ppm/°C CDMM 4527 1.5 1500 500K to 50M 0.5, 1, 2, 5, 10 100:1 to 500:1 0.5, 1, 2, 5 10 - 50 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less (2) Resistance value is calibrated at 100 VDC (3) Contact factory for tighter tolerances (4) Contact factory for other ratios GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CDMM20M0F2500FEF (preferred part number format) C D M M 2 0 M 0 F 2 5 0 0 F E F GLOBAL RESISTANCE RATIO RATIO SOLDER MODEL VALUE (R ) TOLERANCE (R + R ) / R TOLERANCE TERMINATION PACKAGING SPECIAL 1 1 2 2 (see Standard K = kΩ D = ± 0.5 % 3 digit D = ± 0.5 % E = Sn100 B = bulk Blank = Electrical M = MΩ F = ± 1 % significant F = ± 1 % (250 pcs max.) standard Specifications 525K = G = ± 2 % figure, G = ± 2 % F = T/R (dash number) Global Model 525 kΩ J = ± 5 % followed by a J = ± 5 % (1200 pcs) (up to 2 digits) column for 1M50 = K = ± 10 % multiplier 1 = T/R from 1 to 99 options) 1.5 MΩ 2500 = 250:1 (1000 pcs) as applicable 3000 = 300:1 5 = T/R (500 pcs) T = T/R (250 pcs min.) Notes • Contact factory for other ratios • For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543) PATENT(S): www.vishay.com/patents This Vishay product is protected by one or more United States and international patents. Revision: 08-Oct-2021 1 Document Number: 68041 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CDMM www.vishay.com Vishay Techno VOLTAGE AND TEMPERATURE COEFFICIENTS OF RESISTANCE CHART (TYPICAL) RATIO TRACKING GLOBAL MODEL RESISTANCE RATIO VCR Ω (TYPICAL) ppm/V (-55 °C to +150 °C) ppm/°C 500K 100:1 -10 ± 20 CDMM 15M 250:1 -10 ± 10 50M 500:1 -10 -50 to 0 Note • Contact factory for other ratios DERATING CURVE ENVIRONMENTAL SPECIFICATIONS Axis Title Operating temperature -55 °C to +155 °C 120 10000 100 TYPICAL DC ELECTRICAL CIRCUIT 80 1000 R1 3 60 1 3 + + 2 40 100 1 VIN R2 VOUT 20 2 - - 2 0 10 -55 -25 0 25 50 70 100 125 150 175 Ambient Temperature (°C) MECHANICAL SPECIFICATIONS Resistive element Ruthenium oxide (thick film) Encapsulation Molded thermoplastic Substrate Alumina Termination Solder-coated bronze DIMENSIONS in inches (millimeters) E C 6.22 ± 0.508 b 0.2450 ± 0.020 C B A a2 H a1 a2 L W W1 l b L (1) H (1) W W1 A B C E a1 a2 b l 0.455 0.167 0.275 0.216 0.100 0.100 0.083 0.050 ± 0.020 ± 0.010 ± 0.005 ± 0.005 ± 0.010 ± 0.010 ± 0.005 ± 0.005 0.225 0.87 0.145 0.255 (11.56 (4.24 (6.98 (5.49 (2.54 (2.54 (2.11 (1.27 (5.72) (2.21) (3.68) (6.48) ± 0.508) ± 0.254) ± 0.127) ± 0.127) ± 0.254) ± 0.254) ± 0.127) ± 0.127) Note (1) Dimensions includes the terminals Revision: 08-Oct-2021 2 Document Number: 68041 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2nd line Rated Power (%) 1st line 2 d li

CDMM www.vishay.com Vishay Techno PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal shock -55 °C to +150 °C, 1000 cycles, 15 min at each extreme ± 1.0 % ΔR High temperature exposure 1000 h at 155 °C ± 1.0 % ΔR Biased humidity +85 °C, 85 % RH, 10 % rated power (1), 1000 h ± 2.0 % ΔR Mechanical shock 100 g’s for 11 ms, 5 pulses ± 0.5 % ΔR Vibration Frequency varied 10 Hz to 500 Hz in 1 min, 3 directions, 9 h ± 0.5 % ΔR Load life 1000 h at rated power, +70 °C, 1.5 h “ON”, 0.5h “OFF” ± 1.0 % ΔR Resistance to solder heat +260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence ± 1.0 % ΔR Note (1) Applied voltage is based on the critical resistance value, not to exceed 500 V PACKAGING MODEL TAPE WIDTH DIAMETER PIECES/REEL CODE 1200 EF 1000 E1 CDMM 24 mm / embossed plastic 330 mm / 13" 500 E5 250 ET Note • Embossed carrier tape per EIA-481 The above image shows the orientation of the parts in the reel Revision: 08-Oct-2021 3 Document Number: 68041 For technical questions, contact: te1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CDMM

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively , “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statement s about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular produc t with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operatin g parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website . Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000