1/1ページ
ダウンロード(756Kb)
M-PTFEライナーは変性PTFEで成形されており、1/2インチ〜20インチまでの配管に対応することが可能です。
直管は2~6mまで対応可能となっております。
そのためより少ないフランジ接続による施工が可能となります。
1.フランジ接続、組み付け等施工における時間の短縮が可能。
2.PTFEライナーのフレア加工時間の短縮、および材料のロスを省きます。
3.より少ないフランジ接続により、組み付け効率が向上します
このカタログについて
ドキュメント名 | M-PTFEパイプライナー |
---|---|
ドキュメント種別 | 製品カタログ |
ファイルサイズ | 756Kb |
取り扱い企業 | 株式会社吉田SKT (この企業の取り扱いカタログ一覧) |
この企業の関連カタログ

このカタログの内容
Page1
M-PTFE Pipe Liner
M-PTFEパイプライナー
M-PTFEライナーは変性PTFEで成形されており、1/2インチ〜20インチまでの配管に対応することが可能です。
M-PTFE pipe liner is formed with Modified PTFE. The available sizes range from 1/2"〜20" are applied to lined metal pipes.
特徴 規格表 Speaification
単位(Unit): mm
■ 製造後のパイプ内外面には残留応力が残っておりません。径方向、 サイズ 標準タイプ 厚肉タイプ
長さ方向の物理的、機械的強度は均等に仕上がっております。そ Size Standard wall Length Heavy wall Length
のため、高温環境における組み付け、および高温使用時にも寸法 (m) (m)
変化を起こしません。 mm Inch 外径 T 外径 T
OD(mm)(mm) OD(mm)(mm)
■ 直管は2~6mまで対応可能となっております。そのためより少ない 15A 1/2" 15.5 3.05 6.2 15.5 3.5 6.2
フランジ接続による施工が可能となります。 20A 3/4" 20.5 3.05 6.2 20.5 3.5 6.2
1.フランジ接続、組み付け等施工における時間の短縮が可能。 25A 1" 26 3.05 6.2 26 3.5 6.2
2. PTFEライナーのフレア加工時間の短縮、および材料のロスを 40A 1-1/2" 40.5 3.05 6.2 40.5 3.5 6.2
省きます。 50A 2" 52 3.05 6.2 52 4 6.2
3.より少ないフランジ接続により、組み付け効率が向上します。 65A 2-1/2" 62 3.05 6.2 62 4 6.2
80A 3" 77.5 3.05 6.2 77.5 4 6.2
Feature 90A 3-1/2" 89 3.05 6.2 89 4 6.2
100A 4" 101.5 3.05 6.2 101.5 4.5 6.2
■After process, there is no stress remaining in the pipe
125A 5" 127.5 3.18 6.2 127.5 5 6.2
substrate, the physical and mechanical strength of longitude
150A 6" 153.5 3.18 6.2 153.5 5 6.2
and latitude are equal. Therefore, the size of pipe would not
be changed when assembled or used in the high temperature 200A 8" 202 3.18 6.2 202 7 6.2
condition. 250A 10" 254 3.18 6.2 254 9 6.2
■The liner is suitable for lining 6M/2M long pipe which is 300A 12" 303 3.18 6.2 303 11 6.2
longer than the same class product offered by other suppliers *ライナー外径公差:6インチ以下±2%
Therefore, pipe suppliers can use less flanges to meet the 8インチ以上±2.5% 厚み公差±12%
length requirement. They can: *長さは平均6.1~6.2mとなります。
1. Save time for flanges connection materials assembly and *1/2~8インチのライナーはsch.40用に該当し、10~12インチのライ
ナーはsch.20用に該当しております。
the mechanic operation.
*海外製品の為、鋼管規格はANSI/ASME(B36.10)に準拠しております。
2. Save time for PTFE pipe flaring and reduce the material JISではございませんので、ご留意ください。
wastage.
3. Make the assembly efficiently as there are fewer flanges for *Tolerance (liner's OD): below than 6"(inclusive)±2%; 8"(inclusive)and
connection. above sizes ±2.5%. Thickness ±12%.
*Length maybe varied but averagely 6.10〜6.20M.
*The liner from 1/2"〜8" is according to sch.40; and from 10"〜12" will
be according to sch.20.
*Standards of steel pipe: Conforming to ANSI/ASME (B36.10). Please
be aware that no based on JIS (Japanese Industrial Standards).
材料特性 Material property
比重 伸び率 引っ張り強度
Item Specific Elongation Tensile strength
Gravity (%) (kgf/cm2)
Test ASTM ASTM ASTM
method D792 D638 D638
M-PTFE 2.16~2.19 >275 >250
Yoshida SKT co.,ltd.