1/1ページ
ダウンロード(444.2Kb)
放熱や熱拡散に加えて、電磁波遮蔽を兼ね備えた樹脂成形品。 ECU をはじめ、マイクロプロセッサを内蔵するモジュールやコンポーネント筐体の EMC 対策に最適。 アルミと比較し、約45%以上の軽量化が図れ、車載カメラ、ミリ波レーダー、ECUケースでの利用可能。 樹脂素材のため、形状自由度があり、二次加工が省け、コストの削減が見込めます。
このカタログについて
ドキュメント名 | 放熱・電磁波シールド樹脂成形品 |
---|---|
ドキュメント種別 | 製品カタログ |
ファイルサイズ | 444.2Kb |
取り扱い企業 | 積水テクノ成型株式会社 (この企業の取り扱いカタログ一覧) |

このカタログの内容
Page1
電磁波シールド成形品
Electromagnetic Wave Shielding Material Molding Product
特徴 Advantages
●独自材料技術により高シールド性と高放熱性を実現
High electromagnetic wave shielding and heat radiation (Our original ingredients) 自社材料配合技術により様々な製品の
●アルミ代替 (t=2.0mm) により軽量化効果 45%以上 要求品質にあわせた材料開発が可能
Through switching from aluminium,weight is reduced by more 45% Our technologies could meet various parts requests
by choosing our original ingredients
●樹脂化による形状自由度により二次加工費・部品点数低減
The shape flexibility by the resin make it possible to
reduce secondary processing costs and the number of parts
性能比較 Performance comparison シールド性能評価 Electromagnetic interference(EMI) shielding
開発材(PP樹脂) 測定方法:KEC法
Development Measurement method: KEC method
性能項目 単位 アルミ
Characteristics Unit Aluminium 標準 高機能 標準(電界) 高機能(電界) アルミ(電界)
standard high-performance standard(Electrical field) high-performance(Electrical field) Aluminium(Electrical field) 測定方法:DFFC法
Measurement method: DFFC method
密度 g/cm³ 2.68 1.42 1.46 標準(磁界) 高機能(磁界) アルミ(磁界)
Density standard(Magnetic field) high-performance(Magnetic field) Aluminium(Magnetic field) 標準 高機能 アルミ
standard high-performance Aluminium
曲げ強度 130 90
Bending strength MPa 157 82.0 72.8
120
曲げ弾性率 80
Flexural modulus GPa 71 13.3 17.8 110
衝撃強度 100 70
Impact resistance kJ/m² - 4.3 3.0 90 60
熱変形温度(高荷重)
Thermal resistance ℃ - 150.7 149.4 80
70 50
体積固有抵抗 -6 -1 -1
Volume resistivity Ω-cm 6.4×10 3.2×10 1.4×10 60 40
熱伝導率(t=2.0) 50
Thermal conductivity(t=2.0) W/(m・K) 96 9.7 14.0 40 30
燃焼性
Incombustibility UL94 - HB相当 HB相当 30 20
20
MD ×10-5(℃-1) 1.4 1.2 10 10
線膨張係数 2.3
linear expansion coefficient 0
TD ×10-5(℃-1) 5.5 4.8 0.1 1 10 100 1000 0
1 3 5 7 9 11 13 15
周波数[MHz] 周波数[GHz]
※代表値であり、規格値ではありません frequency frequency
※These are representative values, not standard values
アルミ厚み2.0mmに対して、
開発品厚み2.0mmで
45%以上の軽量化を実現 高周波領域において、電磁波遮蔽性に優れる(電磁波シールド:40dB以上⇒99%遮蔽)
In comparison of 2.0 mm thick developed product with
2.0 mm thick alminium High frequency EMI shielding(EMI shielding performance more than 40 dB ⇒ Shield factor 99%)
product, weight is reduced by more 45%
放熱性能評価 Heat dissipation performance
[材料別放熱性実験] [実験結果]
Evaluation method Experimental results
ー ヒーター ー ABS ー 開発品 ー アルミ(ADC12)
120 Heater ABS resin Our develo p m e n t Aluminium
100
38℃の温度低減
80 (⊿38℃)
60 アルミとの差18℃
(18℃ difference)
40
ヒーター 20
0
0 180 360 540 720 900
ABSと当社開発材料との放熱性比較 時間[s] Second
問 合 せ 先 積水テクノ成型株式会社 マーケティンググループ 担当:永井 TEL.03-5521-0738 mail:masao.nagai@sekisui.com
Contact us SEKISUI TECHNO MOLDING CO.LTD Marketing Unit TEL:+81 3-5521-0738 mail:masao.nagai@sekisui.com
電磁波シールド性能[dB]
EMI shielding performance
温度[℃] Degree
電磁波シールド性能[dB]
EMI shiielding performance