産業用イーサネットスイッチ PLANET MGSW-28240F

MGSW-28240F L3 24-Port 100/1000BASE-X SFP + 4-Port 10G SFP+ Metro Ethernet Switch Physical Port • 24 100/1000BASE-X SFP mini-GBIC/SFP ports • 4 10/100/1000BASE-T RJ45 ports, shared with Port-1 to Port-4 • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP • RJ45 to RS232 DB9 console interface for basic management and setup 10Gbps Fiber Ports and Multiple Dual Speed Fiber Ports Deliver High-speed Networking Hardware Conformance PLANET MGSW-28240F L3 24-Port 100/1000BASE-X SFP + 4-Port 10G SFP+ Metro Ethernet Switch is specially designed for service providers and enterprises to deliver • One 100 to 240V AC or dual 36 to 60V DC power high-speed networking over longer distances. Its SFP ports can be connected to various input, redundant power with polarity reverse protect fiber and Ethernet cables to extend switching functionality throughout the network. function The MGSW-28240F is capable of providing non-blocking switch fabric and wire-speed • 19-inch rack-mountable design throughput as high as 128Gbps in the temperature range from -10 to 60 degrees C • IP30 metal case without any packet loss and cyclic redundancy check (CRC) error. It greatly simplifies • -10 to 60 degrees C operating temperature the tasks of upgrading the enterprise LAN for catering to increasing bandwidth demands. Digital Input and Digital Output • 2 digital input (DI) • 2 digital output (DO) • Integrates sensors into auto alarm system • Transfers alarm to IP network via email and SNMP trap DC power switch 4 x 10/100/1000BASE-T 24 x 100/1000BASE-X 4 x 1/10GBase-SR/LR RJ45 port SFP slot SFP slot Layer 3 IP Routing Features AC power input and power switch 2 x DI&DO • IP dynamic routing protocol supports OSPFv2 ON 100~240V AC DC POWER 2 4 2 4 6 8 10 12 14 16 18 20 22 24 26 28 • Routing interface provides per VLAN routing mode ON MGSW-28240F DI 0 DI 1 DO 0 DO 1 GND GND Ring R.O. Console FAN2 Fault FAN1 DC 2 • Supports maximum 128 static routes and route OFF PWR DC 1 Reset DC Input Range: OFF 50/60 Hz 36V~72V DC 1 Fault DC 2 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 115200, N, 8, 1 summarization Grounding System / PWR / Alarm LED RESET button 2 x DC power input Console port Layer 2 Features • Store-and-forward architecture with runt/CRC filtering Layer 3 Routing Support that eliminates erroneous packets to optimize the The MGSW-28240F enables the administrator to conveniently boost network efficiency network bandwidth by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the IPv4 OSPFv2 • Storm control support (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a – Broadcast/Multicast/Unknown unicast database for link state by exchanging link states among Layer 3 switches, and then uses • Supports VLAN the Shortest Path First algorithm to generate a route table based on that database. – IEEE 802.1Q tagged VLAN Data Sheet 1 1 AC POWER

MGSW-28240F Cybersecurity Network Solution to Minimize Security Risks – Up to 256 VLANs groups, out of 4096 VLAN IDs The cybersecurity feature included to protect the switch management in a mission- – Provides Bridging (VLAN Q-in-Q) support (IEEE critical network virtually needs no effort and cost to install. For efficient management, 802.1ad) the MGSW-28240F is equipped with console, web and SNMP management interfaces. – Private VLAN Edge (PVE) With the built-in web-based management interface, the MGSW-28240F offers an easy- – Protocol-based VLAN to-use, platform-independent management and configuration facility. The MGSW-28240F supports SNMP and it can be managed via any management software based on the – MAC-based VLAN standard SNMP protocol. For reducing product learning time, the MGSW-28240F offers – IP subnet-based VLAN Cisco-like command via Telnet or console port and customer doesn’t need to learn new – Voice VLAN command from these switches. Moreover, the MGSW-28240F offers remote secure – GVRP management by supporting SSH, SSL and SNMP v3 connection which can encrypt the • Supports Spanning Tree Protocol packet content at each session. – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) Redundant Ring, Fast Recovery for Critical Network Applications – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), The MGSW-28240F supports redundant ring technology and features strong, rapid spanning tree by VLAN self-recovery capability to prevent interruptions and external intrusions. It incorporates – BPDU Guard advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, • Supports Link Aggregation Spanning Tree Protocol (802.1s MSTP), and redundant power input system into – 802.3ad Link Aggregation Control Protocol (LACP) customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain, simple Ring network, the recovery time of data – Cisco ether-channel (static trunk) link can be as fast as 10ms. – Maximum 14 trunk groups, with 16 ports for each trunk group Office – Up to 32Gbps bandwidth (full duplex mode) Factory • Provides port mirror (many-to-1) 1000 MGSW-28240F • Port mirroring monitors the incoming or outgoing traffic on a particular port Industrial MAN Switch • Loop protection to avoid broadcast loops 1000 E.R.P.S. Ring for Metropolitan Area Network Application • Supports ERPS (Ethernet Ring Protection Switching) Recovery Time < 10ms • IEEE 1588 and Synchronous Ethernet network timing 1000 Quality of Service PoE PoE • Ingress Shaper and Egress Rate Limit per port 1000 8-Port MAN Switch 1000 bandwidth control Industrial PoE Switch Highway Control Center • 8 priority queues on all switch portsIndustrial PoE Switch • Traffic classification – IEEE 802.1p CoS 1588 Time Protocol and Front-access Interface Design – TOS/DSCP/IP Precedence of IPv4/IPv6 packets The MGSW-28240F is ideal for telecom and carrier Ethernet applications, supporting – IP TCP/UDP port number MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous – Typical network application Ethernet. The Switch comes with a user-friendly front-access design to help technicians • Strict priority and Weighted Round Robin (WRR) CoS improve wiring and installation efficiency, whereas, in the traditional design, the power policies socket, console port and even some extension module were always placed on the rear • Supports QoS and In/Out bandwidth control on each port of the product. When technicians are installing or maintaining the older switch model • Traffic-policing on the switch port on the rack, they have to be careful with other surrounding online devices as the rear- • DSCP remarking end of the product cannot be seen clearly. With the front-access design, technicians can avoid messing with other nearby devices. 2

MGSW-28240F AC and DC Redundant Power to Ensure Continuous Operation Multicast The MGSW-28240F possesses a 100~240V AC power supply and dual 36~60V DC • Supports IGMP snooping v1, v2 and v3 power supply utilized as redundant power supply to ensure its continuous operation. Its redundant power system is specifically designed to handle the demands of high-tech • Supports MLD snooping v1 and v2 facilities requiring the highest power integrity. Furthermore, with the 36~60V DC power • Querier mode support supply implemented, the MGSW-28240F can be applied as the telecom level device • IGMP snooping port filtering and placed in almost any difficult environment. • MLD snooping port filtering • MVR (Multicast VLAN Registration) Digital Input and Digital Output for External Alarm Security The MGSW-28240F helps the network administrators efficiently manage the unexpected network situations by providing Digital Input and Digital Output for external alarm device • Authentication on the front panel. The Digital Input can be used to detect and log the status of the – IEEE 802.1x port-based/MAC-based network access external devices such as door intrusion detector. The Digital Output could be used to authentication send alarm whenever the MGSW-28240F has port link-down or power failure. – IEEE 802.1x authentication with guest VLAN Digital Input – Built-in RADIUS client to cooperate with the RADIUS Security OK Alarm Warning Alarm Messaging servers – RADIUS/TACACS+ users access authentication • Access Control List I/O I/O I/O I/O – IP-based Access Control List (ACL) O SNMP – MAC-based Access Control List (ACL)I/ I/O I/O I/O TRAP Enclosure Enclosure Mail System Door Detector Door Detector Log • Source MAC/IP address binding (Door Closed) (Door Open) • DHCP Snooping to filter distrusted DHCP messages Digital Output • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks I/O I/O I/O I/O • IP address access management to prevent unauthorized intruder Management • IPv4 and IPv6 dual stack management RJ45 Cable Fiber Cable AC Power DC Power Failure Link Down Link Down Failure • Switch Management Interfaces – Console/Telnet command line interface – Web switch management IPv6/IPv4 Dual Stack and Layer 2 Capability – SNMP v1, v2c, and v3 switch management Supporting both IPv6 and IPv4 protocols, the MGSW-28240F helps data centers, – SSH/SSL secure access campuses, telecoms, and more to experience the IPv6 era with the lowest investment • IPv6 address/NTP management as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge • Built-in Trivial File Transfer Protocol (TFTP) client network is set up. The MGSW-28240F can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private • BOOTP and DHCP for IP address assignment VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth • System Maintenance control and IGMP/MLD Snooping. Via the link aggregation of supporting ports, the – Firmware upload/download via HTTP/TFTP MGSW-28240F allows the operation of a high-speed trunk to combine with multiple fiber – Reset button for system reboot or reset to factory ports and supports fail-over as well. default – Dual images MSTP LACP • DHCP relay and option 82 Q-in-Q QoS LLDP • User privilege levels control MLD IGMP • NTP (Network Time Protocol) L2/L4 L2/L4 Managed Switch Managed Switch 3

MGSW-28240F Powerful Security • Link Layer Discovery Protocol (LLDP) and LLDP-MED The MGSW-28240F offers a comprehensive Layer 2 to Layer 4 Access Control List • Network diagnostic (ACL) for enforcing security to the edge. It can be used to restrict network access – SFP-DDM (Digital Diagnostic Monitor) by denying packets based on source and destination IP address, TCP/UDP ports or – Cable diagnostic technology provides the defined typical network applications. Its protection mechanism also comprises 802.1X port-based and MAC-based user, and device authentication. With the private VLAN mechanism to detect and report potential cabling function, communication between edge ports can be prevented to ensure user privacy. issues The MGSW-28240F also provides DHCP Snooping, IP Source Guard and Dynamic – ICMPv6/ICMPv4 remote ping ARP Inspection functions to prevent IP snooping from attack and discard ARP packets • SMTP/Syslog remote alarm with invalid MAC address. The network administrators can now construct highly-secure • Four RMON groups (history, statistics, alarms and corporate networks with considerably less time and effort than before. events) • SNMP trap for interface link up and link down Excellent Traffic Control notification The MGSW-28240F is loaded with powerful traffic management and QoS features to • System Log enhance connection services by telecoms and ISPs. The QoS features include wire- • PLANET Smart Discovery Utility for deployment speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi- management tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission. Flexible and Extendable 10Gb Ethernet Solution 10G Ethernet is a big leap in the evolution of Ethernet. Each of the 10G SFP+ slots in the MGSW-28240F supports dual speed and 10GBASE-SR/LR or 1000BASE-SX/LX. With its 4-port, 10G Ethernet link capability and additional 4-port 1G Ethernet link capability, the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The MGSW- 28240F provides broad bandwidth and powerful processing capacity. Intelligent SFP Diagnosis Mechanism The MGSW-28240F supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 150 Ammeter 100 200 30 50 250 20 40 0 300 10 50 V 0 60 A Temperature °C 0 −20 20 0 −20 20 −40 40 −40 40 −60 60 −60 60 dBm dBm Power Transceiver Power Receiver 4

MGSW-28240F Applications Excellent Solution to Core/Department Network The MGSW-28240F is an excellent choice of core layer switch for a Gigabit network. With 24 10/100/1000Mbps ports, the MGSW-28240F is able to connect up to 24 edge switches in the Ethernet environment. Moreover, it also provides 128 Gigabit per second switch fabric and high bandwidth for backbone connection. 10Gbps Switch 10Gbps Switch Control Center 10G 1000 10G Server Farm Server Farm Node 1 Node 1 10Gbps 10Gbps 10G 10G PoE 1000 MGSW-28240F 1000 PoE PoE Camera PoE Switch STP/RTSR/MSTP PoE Switch Redundant Connection PoE Camera Node 2 Node 2 10Gbps 10G 1000 1000 MGSW-28240F MGSW-28240F 24-Port Switch 24-Port Switch PC Group Node 3 Node 3 PC Group 100BASE-TX UTP PoE 100BASE-TX UTP with PoE 1000BASE-T UTP 1000 1000BASE-SX/LX Fiber-optic 10G 10GBASE-SR/LR Fiber-optic 10Gbps Switch 10G Server Farm 10Gbps Node 1 PoE 1000 PoE Camera PoE Switch MGSW-28240F Node 2 1000 24-Port Switch PC Group Node 3 100BASE-TX UTP PoE 100BASE-TX UTP with PoE 1000BASE-T UTP 1000 1000BASE-SX/LX Fiber-optic 10G 10GBASE-SR/LR Fiber-optic 5

MGSW-28240F Specifications Model MGSW-28240F Hardware version 3 Hardware Specifications Copper Ports 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports, shared with Port-1 to Port-4 24 100/1000BASE-X SFP interfaces, SFP/mini-GBIC Slots Compatible with 100BASE-FX SFP transceiver 4 10GbBASE-SR/LR SFP+ interfaces (Port-25 to Port-28) SFP+ Slots Compatible with 1000BASE-SX/LX/BX SFP transceiver Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 128Gbps/non-blocking Throughput 95.2Mpps@64Bytes Address Table 16K entries, automatic source address learning and aging Shared Data Buffer 32M bits IEEE 802.3x pause frame for full duplex Flow Control Back pressure for half duplex Jumbo Frame 10K bytes < 5 sec: System reboot Reset Button > 5 sec: Factory default Dimensions (W x D x H) 440 x 200 x 44.5 mm, 1U height Weight 2.935kg System: AC (Green), DC1 (Green), DC2 (Green), Fault (Red) Ring (Green), R.O. (Green) 10/100/1000T RJ45 Interfaces (Port 1 to Port 4): 1000Mbps LNK/ACT (Green) 10/100Mbps LNK/ACT (Amber) LED 100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24): 1000Mbps LNK/ACT (Green) 100Mbps LNK/ACT (Amber) 1/10Gbps SFP+ Interfaces (Port 25 to Port 28): 10Gbps LNK/ACT (Green) 1Gbps LNK/ACT (Amber) AC input: Max. 36.5 watts/125.2 BTU Power Consumption DC input: Max. 38.7 watts/132.7 BTU Power Requirements – AC AC 100~240V, 50/60Hz 1A Power Requirements – DC DC 36~60V, 1.2A 2 digital input (DI): Level 0: -24~2.1V DI and DO Level 1: 2.1~24V Max. input current: 10mA 2 digital output (DO): Open collector to 24VDC, 100mA EFT Protection 6KV DC ESD Protection 6KV DC Layer 2 Management Functions Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status TX/RX/Both Port Mirroring Many-to-1 monitor 802.1Q tagged VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 256 VLAN groups, out of 4096 VLAN IDs GVRP 6

MGSW-28240F IEEE 802.3ad LACP/static trunk Link Aggregation 14 trunk groups with 16 port per trunk group IEEE 802.1D Spanning Tree Protocol Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol Traffic classification based, strict priority and WRR 8-level priority for switching: - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/ToS field in IP packet IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IGMP querier mode support MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 256 entries Per port bandwidth control Bandwidth Control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps Layer 3 Functions IP Interfaces Max. 128 VLAN interfaces Routing Table Max. 128 routing entries IPv4 hardware static routing Routing Protocols IPv6 hardware static routing OSPFv2 dynamic routing Management Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMPv3 RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 2933 IGMP-STD-MIB RFC 1643 Ethernet MIB RFC 3411 SNMP-Frameworks-MIB RFC 2863 Interface MIB RFC 4292 IP Forward MIB SNMP MIBs RFC 2665 Ether-Like MIB RFC 4293 IP MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 4836 MAU-MIB RFC 2737 Entity MIB IEEE 802.1X PAE RFC 2618 RADIUS Client MIB LLDP Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEEE 802.3 10BASE-T IEEE 802.1ab LLDP IEEE 802.3u 100BASE-TX/100BASE-FX RFC 768 UDP IEEE 802.3z Gigabit SX/LX RFC 793 TFTP IEEE 802.3ab Gigabit 1000T RFC 791 IP IEEE 802.3ae 10Gb/s Ethernet RFC 792 ICMP IEEE 802.3x flow control and back pressure RFC 2068 HTTP Standards Compliance IEEE 802.3ad port trunk with LACP RFC 1112 IGMP v1 IEEE 802.1D Spanning Tree Protocol RFC 2236 IGMP v2 IEEE 802.1w Rapid Spanning Tree Protocol RFC 2328 OSPF v2 IEEE 802.1s Multiple Spanning Tree Protocol RFC 3376 IGMP v3 IEEE 802.1p Class of Service RFC 2710 MLD v1 IEEE 802.1Q VLAN tagging FRC 3810 MLD v2 IEEE 802.1X Port Authentication Network Control ITU G.8032 Ethernet Ring Protection Switching Environment Temperature: -10 ~ 60 degrees C for AC power input Operating -40 ~ 75 degrees C for DC power input Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -40 ~ 80 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing) Ordering Information MGSW-28240F L3 24-Port 100/1000BASE-X SFP + 4-Port 10G SFP+ Metro Ethernet Switch 7

MGSW-28240F Related Products MGSW-24160F 16-Port 100/1000BASE-X SFP + 8-Port 10/100/1000BASE-T L2/L4 Managed Metro Ethernet Switch MGSD-10080F 8-Port 100/1000X SFP + 2-Port 10/100/1000T Managed Metro Ethernet Switch Available Modules for MGSW-28240F 10Gigabit Ethernet Transceiver (10GBASE-X SFP+) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MTB-RJ 10G Copper -- 30m -- 0 ~ 70 degrees C MTB-SR 10G LC Multi Mode 300m 850nm 0 ~ 60 degrees C MTB-LR 10G LC Single Mode 10km 1310nm 0 ~ 60 degrees C MTB-TSR 10G LC Multi Mode 300m 850nm -40 ~ 75 degrees C MTB-TLR 10G LC Single Mode 10km 1310nm -40 ~ 75 degrees C 10Gigabit Ethernet Transceiver (10GBASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MTB-LA20 10G WDM(LC) Single Mode 20km 1270nm 1330nm 0 ~ 60 degrees C MTB-LB20 10G WDM(LC) Single Mode 20km 1330nm 1270nm 0 ~ 60 degrees C MTB-LA40 10G WDM(LC) Single Mode 40km 1270nm 1330nm 0 ~ 60 degrees C MTB-LB40 10G WDM(LC) Single Mode 40km 1330nm 1270nm 0 ~ 60 degrees C MTB-LA60 10G WDM(LC) Single Mode 60km 1270nm 1330nm 0 ~ 60 degrees C MTB-LB60 10G WDM(LC) Single Mode 60km 1330nm 1270nm 0 ~ 60 degrees C Gigabit Ethernet Transceiver (1000BASE-X SFP) Model DDM Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MGB-GT -- 1000 Copper -- 100m -- 0 ~ 60 degrees C MGB-SX(V2) YES 1000 LC Multi Mode 550m 850nm 0 ~ 60 degrees C MGB-SX2(V2) YES 1000 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MGB-LX(V2) YES 1000 LC Single Mode 20km 1310nm 0 ~ 60 degrees C MGB-L40 YES 1000 LC Single Mode 40km 1310nm 0 ~ 60 degrees C MGB-L80 YES 1000 LC Single Mode 80km 1550nm 0 ~ 60 degrees C MGB-L120(V2) YES 1000 LC Single Mode 120km 1550nm 0 ~ 60 degrees C MGB-TSX YES 1000 LC Multi Mode 550m 850nm -40 ~ 75 degrees C MGB-TSX2 YES 1000 LC Multi Mode 2km 1310nm -40 ~ 75 degrees C MGB-TLX(V2) YES 1000 LC Single Mode 20km 1310nm -40 ~ 75 degrees C MGB-TL40 YES 1000 LC Single Mode 40km 1310nm -40 ~ 75 degrees C MGB-TL80 YES 1000 LC Single Mode 80km 1550nm -40 ~ 75 degrees C Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP) Model DDM Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MGB-LA10(V2) MGB-LB10(V2) YES 1000 WDM(LC) Single Mode 10km 1310nm 1550nm 1550nm 1310nm 0 ~ 60 degrees C MGB-LA20(V2) 1310nm 1550nm MGB-LB20(V2) YES 1000 WDM(LC) Single Mode 20km 1550nm 1310nm 0 ~ 60 degrees C MGB-LA40(V2) 1310nm 1550nm MGB-LB40(V2) YES 1000 WDM(LC) Single Mode 40km 1550nm 1310nm 0 ~ 60 degrees C MGB-LA80 YES 1000 WDM(LC) Single Mode 80km 1490nm 1550nmMGB-LB80 1550nm 1490nm 0 ~ 60 degrees C MGB-TLA10(V2) 1310nm 1550nm MGB-TLB10(V2) YES 1000 WDM(LC) Single Mode 10km 1550nm 1310nm -40 ~ 75 degrees C MGB-TLA20 MGB-TLB20 YES 1000 WDM(LC) Single Mode 20km 1310nm 1550nm 1550nm 1310nm -40 ~ 75 degrees C MGB-TLA40 MGB-TLB40 YES 1000 WDM(LC) Single Mode 40km 1310nm 1550nm 1550nm 1310nm -40 ~ 75 degrees C MGB-TLA80 YES 1000 WDM(LC) Single Mode 80km 1490nm 1550nmMGB-TLB80 1550nm 1490nm -40 ~ 75 degrees C 8

MGSW-28240F Fast Ethernet Transceiver (100BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 degrees C MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 degrees C MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 degrees C MFB-F120 100 LC Single Mode 120km 1310nm 0 ~ 60 degrees C MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75 degrees C MFB-TF20 100 LC Single Mode 20km 13100nm -40 ~ 75 degrees C Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MFB-FA20 100 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60 degrees C MFB-FB20 100 WDM(LC) Single Mode 20km 1550nm 1310nm 0 ~ 60 degrees C MFB-TSA 100 WDM(LC) Multi Mode 2km 1310nm 1550nm -40 ~ 75 degrees C MFB-TSB 100 WDM(LC) Multi Mode 2km 1550nm 1310nm -40 ~ 75 degrees C MFB-TFA20 100 WDM(LC) Single Mode 20km 1310nm 1550nm -40 ~ 75 degrees C MFB-TFB20 100 WDM(LC) Single Mode 20km 1550nm 1310nm -40 ~ 75 degrees C MFB-TFA40 100 WDM(LC) Single Mode 40km 1310nm 1550nm -40 ~ 75 degrees C MFB-TFB40 100 WDM(LC) Single Mode 40km 1550nm 1310nm -40 ~ 75 degrees C PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City MGSW-28240F 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9