産業用イーサネットスイッチ PLANET MGSD-10080F

MGSD-10080F 8-Port 100/1000X SFP + 2-Port 10/100/1000T Managed Metro Ethernet Switch Physical Port • 8 100/1000Base-X SFP mini-GBIC slots • 2-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 • One RJ-45 console interface for basic management and setup Redundant Power System • Redundant Power System: 100V ~ 240V AC / Dual 36V ~ 72V DC Multiple SFP Fiber Port Switch for Growing Long-Reach Networking of • Active-active redundant power failure protection Enterprise, Telecoms and Campus • Backup of catastrophic power failure on one supply The PLANET latest Metro series Ethernet switch MGSD-10080F is equipped with • Fault tolerance and resilience. advanced management functions and provides 8 100/1000Mbps dual speed SFP Fiber ports, and 2 10/100/1000Mbps TP ports delivered in a rugged strong case. Digital Input / Digital Output It is capable of providing non-blocking switch fabric and wire-speed throughput as high as 20Gbps in the temperature range from -10 to 60 degrees C without • 2 Digital Input (DI) any packet loss and CRC error, which greatly simplify the tasks of upgrading the • 2 Digital Output (DO) enterprise LAN for catering to increasing bandwidth demands. The MGSD-10080F • Integrates sensors into auto alarm system is specially designed for service provider to deliver profitable long distance Ethernet • Transfer alarm to IP network via SNMP trap network. The MGSD-10080F adopts “Front Access” design, making the wiring and maintenance of the MGSD-10080F placed in a cabinet very easy for technicians. Hardware Design • -10 to 60 degrees C operating temperature for DC power input only AC Power Input System / PWR / Port L.E.D. and Switch 2 x DI / DO 8 x 100/1000Base-X SFP Slot • 13-inch desktop size, 19-inch Rack-mountable • Relay alarm for port breakdown, power failure • Fanless design Layer 2 Features • Prevents packet loss with back pressure (Half-Duplex) Grounding 2 x DC Power Inputs 2 x 10/100/1000Base-T, RJ-45 and IEEE 802.3x PAUSE frame flow control DC Power Switch Reset Button RJ-45-to-DB9 Console (Full-Duplex) • High performance of Store-and-Forward architecture and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth • Storm Control support – Broadcast / Multicast / Unicast Data Sheet 1 1

MGSD-10080F • Supports VLAN Flexible and Extendable Solution – IEEE 802.1Q Tagged VLAN The 8 mini-GBIC slots built in the MGSD-10080F support Dual-Speed, 100Base- – Up to 255 VLANs groups, out of 4094 VLAN IDs FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, – Provider Bridging (VLAN Q-in-Q) support (IEEE meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to 802.1ad) extend the network efficiently. The MGSD-10080F supports SFP-DDM (Digital – Private VLAN Edge (PVE) Diagnostic Monitor) function that can easily monitor real-time parameters of the – Protocol-based VLAN SFP for network administrator, such as optical output power, optical input power, – MAC-based VLAN temperature, laser bias current, and transceiver supply voltage. – Voice VLAN • Supports Spanning Tree Protocol Digital Diagnostic Monitor (DDM) – STP, IEEE 802.1D Spanning Tree Protocol Voltage – RSTP, IEEE 802.1w Rapid Spanning Tree Protocol 150 Ammeter – MSTP, IEEE 802.1s Multiple Spanning Tree 100 200 30 50 250 20 40 Protocol, spanning tree by VLAN 0 300 10 50 V – BPDU Guard 0 60 A • Supports Link Aggregation Temperature – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (Static Trunk) °C – Maximum 5 trunk groups, up to 8 ports per trunk 0 group −20 20 0 −20 20 −40 40 −40 40 −60 60 – Up to 16Gbps bandwidth (Duplex Mode) −60 60 dBm dBm • Provides Port Mirror (1-to-1) Power Transceiver Power Receiver • Port Mirroring to monitor the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops AC and DC Redundant Power to Ensure Continuous Operation Quality of Service To enhance the operation reliability and flexibility, the MGSD-10080F is equipped • Ingress Shaper and Egress Rate Limit per port with one 100 ~ 240V AC power supply unit and two additional 36 ~ 72V DC power input connectors for redundant power supply installation. The Redundant Power bandwidth control Systems are specifically designed to handle the demands of high tech facilities • 8 priority queues on all switch ports requiring the highest power integrity. Furthermore, with the 36 ~ 72V DC power • Traffic classification supply implemented, the MGSD-10080F can be applied as the telecom level device – IEEE 802.1p CoS that could be located in the electronic room. – IP TOS / DSCP / IP Precedence – IP TCP/UDP port number Digital Input and Digital Output for External Alarm – Typical network application The MGSD-10080F supports Digital Input, and Digital Output on the front panel. The external alarm offers technicians the ability to use Digital Input to detect, and • Strict priority and Weighted Round Robin (WRR) CoS log external device status (such as door intrusion detector) for the alarm as Digital policies Output could be used to alarm if the MGSD-10080F has port link down, link up or power failure. 2

MGSD-10080F Digital Input • Supports QoS and In/Out bandwidth control on each port • Traffic-policing policies on the switch port • DSCP remarking I/O O SNMP O I/I/ I/O TRAP Enclosure Enclosure Mail System Door Detector Door Detector Log (Door Close) (Door Open) Multicast Security OK!! Alarm Warning Alarm Messaging • Supports IGMP Snooping v1, v2 and v3 Digital Output • Supports MLD Snooping v1 and v2 • Querier mode support I/O I/O I/O I/O • IGMP Snooping port filtering • MLD Snooping port filtering • MVR (Multicast VLAN Registration) Security Fiber Cable RJ-45 Cable AC Power DC Power Failure Link Down Link Down Failure • IEEE 802.1x Port-based / MAC-based network access authentication • Built-in RADIUS client to co-operate with the RADIUS Cost-effective IPv6 Managed Gigabit Switch Solution for Metro Ethernet servers To fulfill the demand for ISP to build up the IPv6 (Internet Protocol version 6) • RADIUS / TACACS+ users access authentication network infrastructure speedily, the MGSD-10080F supports both IPv4 and IPv6 • IP-based Access Control List (ACL) management functions. It can work with original IPv4 network structure and also • MAC-based Access Control List support the new IPv6 network structure. With easy and friendly management interfaces and plenty of management functions included, the MGSD-10080F Metro • Source MAC / IP address binding Ethernet Switch is the best choice for ISP and service providers to build the IPv6 • DHCP Snooping to filter untrusted DHCP messages FTTx edge service and for Industries to connect with IPv6 network. • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding Layer 2 / Layer 4 Full-functioned Managed Switch for Building • IP Source Guard prevents IP spoofing attacks Automation Networking • IP address access management to prevent The MGSD-10080F Managed Ethernet Switch is also ideal for applications in the unauthorized intruder factory data centers and distributions. It provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and secure management features to protect customer’s Management Automation Ethernet network connectivity with reliable switching recovery capability • Switch Management Interfaces that is suitable for implementing fault tolerant and mesh network architectures. – Console / Telnet Command Line Interface – Web switch management Powerful Security – SNMP v1 and v2c switch management The MGSD-10080F offers comprehensive Access Control List (ACL) for enforcing – SSH / SSL and SNMP v3 secure access security to the edge. Its protection mechanisms also comprise port-based 802.1x and MAC-based user and device authentication. The port-security is effective in • Four RMON groups (history, statistics, alarms, and limiting the numbers of clients passing through, so that network administrators can events) now construct highly secured corporate networks with time and effort considerably • IPv6 IP Address / NTP / DNS management less than before. • Built-in Trivial File Transfer Protocol (TFTP) client 3

MGSD-10080F Application Optimized Design for Metropolitan Area Network By means of improving the technology of Optical Fiber Ethernet with high-flexible, • BOOTP and DHCP for IP address assignment high-extendable and easy-installation features, the MGSD-10080F offers the data • Firmware upload / download via HTTP / TFTP exchange speed of Optical Fiber up to 1Gbps, and the distance of Gigabit Optical Fiber up to 120km. It supports service providers, such as ISP and Telecom, to • DHCP Relay install Metropolitan Area Network (MAN) based on Fiber technology to the WAN • DHCP Option 82 Internet Service. • User Privilege levels control • NTP (Network Time Protocol) Metropolitan Area Network Application • Link Layer Discovery Protocol (LLDP) Protocol • SFP-DDM (Digital Diagnostic Monitor) City D • Cable Diagnostic technology provides the mechanism City B to detect and report potential cabling issues 120km 1000 • Reset button for system reboot or reset to factory MGSD-10080F default City A MGSD-10080F 1000 • PLANET Smart Discovery Utility for deploy 120km 1000 1000 management City E 120km 1000 MGSD-10080F 1000 1000 City C 120km MGSD-10080F 1000 Spanning Tree Redundant Connection MGSD-10080F 1000 1000Base-SX/LX Fiber-optic Excellent Solution of Core / Department Switch With 10 Gigabit ports, the MGSD-10080F is able to connect up to 10 edge switches in the Ethernet environment. Moreover, the MGSD-10080F provides 20 Gigabit per second switch fabric and high bandwidth for backbone connection. The MGSD-10080F is an excellent choice of core layer switch for a Gigabit network. Central Office Branch Office B Branch Office A 20F/SAM MGSD-10080F 1000 10F/ENM 1000 1000 MGSD-10080F MGSD-10080F 1000 3F/Control Center 120km 1000 1000Base-SX/LX Fiber-optic 4

MGSD-10080F Product Specifications Model MGSD-10080F Hardware Specification 8 1000Base-SX/LX/BX SFP interfaces, from port 1 to port 8 SFP/mini-GBIC Slots Compatible with 100Base-FX SFP Copper Ports 2 10/ 100/1000Base-T RJ-45 Auto-MDI/MDI-X ports Console Port 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Throughput (packet per second) 14.8Mpps @ 64Bytes packet Switch Fabric 20Gbps / non-blocking Address Table 8K entries, automatic source address learning and ageing Share Data Buffer 4Mbits IEEE 802.3x Pause Frame for Full-Duplex Flow Control Back pressure for Half-Duplex Jumbo Frame 9Kbytes < 5 seconds: System Reboot Reset Button > 10 seconds: Factory Default Dimensions (W x D x H) 330 x 155 x 43.5 mm, 1U high Weight 1661g System: PWR (Green) DC 1 (Green) DC 2 (Green) Fault Alarm (Green) LED Indicator Ring* (Green) Ring Owner* (Green) Per Gigabit Ports: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Max. 11.2 Watts / 38.2 BTU (AC input) Power Consumption Max. 10.8 Watts / 36.9 BTU (DC input) AC 100~240V, 50/60Hz 0.15A Power Requirements -36V DC @ 0.3A, Range: -36V ~ -72V DC Alarm One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V 2 Digital Input (DI) : Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) DI/DO Input Load to 24V DC, 10mA max. 2 Digital Output (DO) : Open collector to 24VDC, 100mA max. Layer 2 Function Port disable / enable Auto-Negotiation 10/100/1000Mbps full and half duplex mode selection Port Configuration Flow Control disable / enable Bandwidth control on each port Power saving mode control Display each port’s speed duplex mode, link status, flow control status, Port Status auto negotiation status, trunk status TX / RX / Both Port Mirroring 1 to 1 monitor 802.1Q Tagged Based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs IEEE 802.3ad LACP / Static Trunk Link Aggregation Supports 5 groups of 8-Port trunk support 5

MGSD-10080F Traffic classification based, Strict priority and WRR 8-Level priority for switching - Port Number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP Packet IGMP (v1/v2/V3) Snooping, up to 255 multicast Groups IGMP Snooping IGMP Querier mode support MLD (v1/v2) Snooping, up to 255 multicast Groups MLD Snooping MLD Querier mode support IP-based ACL / MAC-based ACL Access Control List Up to 123 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps Management Basic Management Interfaces Console, Telnet, Web Browser, SNMP v1, v2c and v3 Secure Management Interface SSH, SSL, SNMP v3 RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1) SNMP MIBs RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC-3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Standards Conformance Regulation Compliance FCC Part 15 Class A, CE IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/100Base-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x Flow Control and Back pressure IEEE 802.3ad Port trunk with LACP IEEE 802.1D Spanning tree protocol IEEE 802.1w Rapid Spanning tree protocol IEEE 802.1s Multiple Spanning tree protocol IEEE 802.1p Class of service Standards Compliance IEEE 802.1Q VLAN Tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 Environment Temperature : -10 ~ 60 degrees C for DC power input Operating 0 ~ 50 degrees C for AC power input Relative Humidity : 5 ~ 95% (non-condensing) Temperature: -10 ~ 70 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing) 6

MGSD-10080F Ordering Information MGSD-10080F 8-Port 100/1000X SFP + 2-Port 10/100/1000T Managed Metro Ethernet Switch Available Modules for MGSD-10080F • 1000Mbps SFP transceiver modules MGB-GT SFP-Port 1000Base-T Module MGB-SX SFP-Port 1000Base-SX mini-GBIC module - 550m MGB-SX2 SFP-Port 1000Base-SX mini-GBIC module - 2km MGB-LX SFP-Port 1000Base-LX mini-GBIC module - 10km MGB-L30 SFP-Port 1000Base-LX mini-GBIC module - 30km MGB-L50 SFP-Port 1000Base-LX mini-GBIC module - 50km MGB-L70 SFP-Port 1000Base-LX mini-GBIC module - 70km MGB-L120 SFP-Port 1000Base-LX mini-GBIC module - 120km MGB-LA10 SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module - 10km MGB-LB10 SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module - 10km MGB-LA20 SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module - 20km MGB-LB20 SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module - 20km MGB-LA40 SFP-Port 1000Base-LX (WDM,TX:1310nm) mini-GBIC module - 40km MGB-LB40 SFP-Port 1000Base-LX (WDM,TX:1550nm) mini-GBIC module - 40km MGB-TSX SFP-Port 1000Base-SX mini-GBIC module - 550m (-40 ~ 75 degrees C) MGB-TLX SFP-Port 1000Base-LX mini-GBIC module - 10km (-40 ~ 75 degrees C) MGB-TL30 SFP-Port 1000Base-LX mini-GBIC module - 30km (-40 ~ 75 degrees C) MGB-TL70 SFP-Port 1000Base-LX mini-GBIC module - 70km (-40 ~ 75 degrees C) • 100Mbps SFP transceiver modules MFB-FX SFP-Port 100Base-FX Transceiver (1310nm) - 2km MFB-F20 SFP-Port 100Base-FX Transceiver (1310nm) - 20km MFB-F40 SFP-Port 100Base-FX Transceiver (1310nm) - 40km MFB-F60 SFP-Port 100Base-FX Transceiver (1310nm) - 60km MFB-FA20 SFP-Port 100Base-BX Transceiver (WDM,TX:1310nm) - 20km MFB-FB20 SFP-Port 100Base-BX Transceiver (WDM,TX:1550nm) - 20km MFB-TFX SFP-Port 100Base-FX Transceiver (1310nm) - 2km (-40 ~ 75 degrees C) MFB-TF20 SFP-Port 100Base-FX Transceiver (1310nm) - 20km (-40 ~ 75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City MGSD-10080F 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2013 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 7