産業用PoEスイッチ PLANET MGS-5220-8P2X

MGS-5220-8P2X L2+ 8-Port 2.5G 802.3at PoE + 2-Port 1G/10G SFP+ Managed Multigigabit Switch Physical Port • 8-Port 100/1000/2500 BASE-T with 30W PoE injector • 2-port 1/10 GBASE-X SFP+ • RS-232 RJ45 console interface for switch basic management and setup Power over Ethernet • Up to 8 ports of IEEE 802.3af/802.3at devices powered • Supports PoE Power up to 30.8 watts for each PoE port • Auto detects powered device (PD) • Circuit protection prevents power interference between ports New Generation of Multigigabit PoE+ Managed Switch with Full PoE Power Budget • Remote power feeding up to 100 meters MGS-5220-8P2X, PLANET’s first Layer 2+ Managed Multigigabit Switch providing • PoE Management 2.5Gbps data rate and PoE over UTP cables, is designed for the demand of – PoE Port Status monitoring high-bandwidth required network equipment, such as 802.11ac Wave 2 wireless – Total PoE power budget control AP. Offering a perfect hardware configuration with with 8 100/1000/2500BASE-T – Over Temperature Protection ports featuring 30-watt 802.3at PoE+, and 2 extra 1/10 Gigabit BASE-X SFP+ – PoE usage threshold fiber slots, the MGS-5220-8P2X breaks the bandwidth limitation of connecting – Temperature threshold the wireless network with the wired network. Featuring hardware-based Layer – Per port PoE function enable/disable 3 static routing capability, Layer 2 and Layer 4 switching engine, and PLANET – PoE Port Power feeding priority Intelligent PoE functions, it provides a highly-secure, environment-friendly network – Per PoE port power limit management and accelerates the deployment of wireless network infrastructure for – PD classification detection enterprises and smart cities. – Sequence port PoE Layer 2 Features • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth • Storm Control support – Broadcast/Multicast/Unknown unicast • Supports VLAN – IEEE 802.1Q tagged VLAN – Up to 255 VLANs groups, out of 4094 VLAN IDs – Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) 2.5Gbps Cabability for Diversified Bandwidth Applications – Private VLAN Edge (PVE) With the terminal access rates of 802.11ac wireless APs reaching as high as – Protocol-based VLAN 1.2Gbps to 2.6Gbps, Gigabit ports has been unable to satisfy the demand. – MAC-based VLAN Supporting both 1Gbps and 2.5Gbps capability and 802.3af/at POE output, the – Voice VLAN MGS-5220-8P2X can deliver not only data to 802.11ac wireless APs, but also • Supports Spanning Tree Protocol power to other powered devices such as APs and IP cameras. – STP, IEEE 802.1D Spanning Tree Protocol 1

MGS-5220-8P2X New Generation of Multigigabit Switch – RSTP, IEEE 802.1w Rapid Spanning Tree Protocol General Product MGS-5220-8P2X – MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN – BPDU Guard 1G 2.5G • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) 800M – Cisco ether-channel (static trunk) 800M 800M 800M – Maximum 5 trunk groups, up to 8 ports per trunk group 800M waiting – Up to 20Gbps bandwidth (full duplex mode) 800M waiting • Provides port mirror (many-to-1) • Port mirroring to monitor the incoming or outgoing traffic on AP 3x3 3x311 AC Wireless AP 11 AC Wireless a particular port AC AC • Loop protection to avoid broadcast loops AC AC Layer 3 IP Routing Features AC AC AC AC • Supports maximum 128 static routes and route AC AC summarization Quality of Service Cybersecurity Network Solution to Minimize Security Risks • Ingress Shaper and Egress Rate Limit per port bandwidth The cybersecurity feature to protect the switch management and enhance the control security for mission-critical network without extra deployment cost and effort. Use • 8 priority queues on all switch ports the newest kernel of SSH and SSL protocols to provide strong protection against • Traffic classification advanced threats. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before. – IEEE 802.1p CoS – TOS/DSCP/IP Precedence of IPv4/IPv6 packets Built-in Unique PoE Functions for Surveillance Management – IP TCP/UDP port number As a managed PoE Switch for surveillance network, the MGS-5220-8P2X features – Typical network application the following intelligent PoE management functions: • Strict priority and Weighted Round Robin (WRR) CoS ■ PD Alive Check policies ■ Scheduled Power Recycling • Supports QoS and In/Out bandwidth control on each port ■ SMTP/SNMP Trap Event Alert • Traffic-policing policies on the switch port ■ PoE Schedule • DSCP remarking Intelligent Powered Device Alive Check Multicast The MGS-5220-8P2X can be configured to monitor a connected PD (powered device) status in real time via ping action. Once the PD stops working and it is • Supports IGMP Snooping v1, v2 and v3 without response, the MGS-5220-8P2X will resume the PoE port power and bring • Supports MLD Snooping v1 and v2 the PD back to work. It will greatly enhance the network reliability through the PoE • Querier mode support port resetting the PD’s power source, thus reducing administrator management • IGMP Snooping port filtering burden. • MLD Snooping port filtering Step 1 Step 2 • Multicast VLAN Registration (MVR) support PD Status PT PoE Camera No Response...... Good!! Security Ping Request Ping Request • Authentication Ping Echo Check alive status for 3 times – IEEE 802.1x Port-based/MAC-based network access Step 3 Step 4 authentication Alarm Notification PoE PD Alive!! PoE ON OFF ON ON Restart PoE device if without response 2

MGS-5220-8P2X Scheduled Power Recycling – Built-in RADIUS client to co-operate with the RADIUS The MGS-5220-8P2X allows each of the connected PDs to reboot at a specified time each week. Therefore, it will reduce the chance of PD crash resulting from servers buffer overflow. – TACACS+ login users access authentication – RADIUS/TACACS+ users access authentication Automatically Reboot • Access Control List S M T W T F S Every Friday 23:00 – IP-based Access Control List (ACL) CPU/Buffer – MAC-based Access Control List Load 85% • Source MAC/IP address binding PoE CPU/Buffer • DHCP Snooping to filter un-trusted DHCP messages Load 10% • Dynamic ARP Inspection discards ARP packets with ON OFF ON PoE PT Camera invalid MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks SMTP/SNMP Trap Event Alert Though most NVR or camera management software offers SMTP email alert • Auto DoS rule to defend DoS attack function, the MGS-5220-8P2X further provides event alert function to help to • IP address access management to prevent unauthorized diagnose the abnormal device owing to whether or not there is a break of the intruder network connection, loss of PoE power or the rebooting response by the PD Alive Check process. Management SMTP/SNMP Trap Event Alert • IPv4 and IPv6 dual stack management • Switch Management Interfaces MGS-5220-8P2X E-mail Alert – Console/Telnet Command Line Interface – Web switch management Malfunction – SNMP v1, v2c, and v3 switch management 2.5G 2.5G – SSH/SSL secure access • IPv6 IP Address/NTP/DNS management • Built-in Trivial File Transfer Protocol (TFTP) client • BOOTP and DHCP for IP address assignment • System Maintenance Wi-Fi AP Wi-Fi AP – Firmware upload/download via HTTP/TFTP PoE Schedule for Energy Saving – Reset button for system reboot or reset to factory default Besides being used for IP surveillance, the MGS-5220-8P2X is certainly applicable – Dual Images to build any PoE network including VoIP and wireless LAN. Under the trend of • DHCP Relay energy saving worldwide and contributing to the environmental protection on the • DHCP Option82 Earth, the MGS-5220-8P2X can effectively control the power supply besides its • User Privilege levels control capability of giving high watts power. The “PoE schedule” function helps you to • NTP (Network Time Protocol) enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy • Link Layer Discovery Protocol (LLDP) and LLDP-MED and budget. • Network Diagnostic – ICMPv6/ICMPv4 Remote Ping – Cable Diagnostic technology provides the mechanism to 8AM 5PM 5PM 8AM detect and report potential cabling issues • SMTP/Syslog remote alarm • Four RMON groups (history, statistics, alarms and events) 2.5G 2.5G 2.5G 2.5G 2.5G 2.5G 2.5G 2.5G • SNMP trap for interface Linkup and Linkdown notification • System Log Power Power Power Power Power Power Power Power Off Off Off On • PLANET Smart Discovery Utility for deployment On On On On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Saves 24watts / hr during off-business hours Total consumption of 36watts / hr management Total Saved = 10800watts / month 2.5G 2.5G UTP with PoE 3

MGS-5220-8P2X Solution for IPv6 Networking With the support for IPv6/IPv4 protocol, and easy and friendly management interfaces, the MGS-5220-8P2X is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment and without having to replace the network facilities even though ISPs establish the IPv6 FTTx edge network. Application WEB SSL TELNET ICMP Transport Layer SNMP SSH NTP DHCP IPv4 IPv6 Stack Stack IPv4 Network IPv6 Network IPv4 Management Host MGS-5220-8P2X IPv6 Management Host IPv4 and IPv6 VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the MGS-5220-8P2X not only provides ultra high transmission performance and excellent layer 2 technologies, but also offers IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer2 Features The MGS-5220-8P2X can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The MGS-5220-8P2X allows the operation of a high-speed trunk combining multiple ports. Supporting 6 trunk groups, it enables a maximum of up to 8 ports per trunk and supports connection fail-over as well. Powerful Security The SMGS-5220-8P2X offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. Enhanced Security and Traffic Control The MGS-5220-8P2X also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now build highly-secure corporate networks with considerably less time and effort than before. User-friendly Secure Management For efficient management, the MGS-5220-8P2X is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, theMGS-5220-8P2X offers an easy-to-use, platform independent management and configuration facility. The MGS-5220-8P2X supports SNMP and it can be managed via any management software based on the standard SNMP v1 and v2 protocols. For reducing product learning time, the MGS-5220- 8P2X offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the MGS- 5220-8P2X offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can encrypt the packet content at each session. MGS-5220-8P2X 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SSH SNMPv3 4

MGS-5220-8P2X Flexible and Extendable Solution The 2 mini-GBIC SFP+ slots built in the MGS-5220-8P2X support dual speed as it features 1G/10G BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and up to 10/20/30/40/50/70/120 kilometers (single- mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The MGS-5220-8P2X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Applications Layer 3 VLAN Static Routing and PoE Application With the built-in robust IPv4/IPv6 Layer 3 traffic routing protocols, the MGS-5220-8P2X ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 128 routing entries. The MGS-5220-8P2X is certainly a cost-effective and ideal solution for enterprises. Providing up to 8 Multigigabit High-power PoE ports and in-line power interface, the MGS-5220-8P2X High-power PoE Switch can easily build a centrally- controlled power network shared by wireless Gigabit AP, IP phone system, or mega-pixel IP camera system group for the enterprises. VLAN Routing + PoE Applications 2.5G 2.5G VoIP Ph V onL eA (N P1 oE00 ) D IPo m Sua ri vn e V iB lL la 192 A nce .1 N6 3 ( 0 P0 o8.10 E D ) .x o/2 m4 ain A 192.168.30. MGS-5220-8P2X x/24 Layer 3 IP Static Routing 2.5G 10G Wireless NVVL AP R AN IP ( SPoE Con P e B rvX e2 r00 ) tro SDom V l Ce en r a LA t v e e in r r C N 11 9 D2 o.1 m6 a8 i. n2 0 1. 9x 2/2 .14 68 2.5G 2.5G UTP with PoE .0.x/24 10G 10GBASE-SR/LR Fiber-optic 5

MGS-5220-8P2X PoE Wi-Fi Hotspot Solution with Extended Network Infrastructure for Public Spaces The MGS-5220-8P2X comes with non-blocking design, desktop size and SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in cost. Providing eight 100/1000/2500 BASE-T PoE ports, in-line power interfaces and two 10 Gigabit SFP interfaces, the MGS-5220-8P2X can easily build a Networking Authentication on Wireless LAN Controllers system for the enterprises. For instance, it can work with the Wireless Controller and RADIUS Server to perform comprehensive security for wireless user authentication with powered APs. MGS-5220-8P2X 10G Core Network 2.5G 2.5G 2.5G 2.5G 2.5G 2.5G 2.5G 2.5G AP AP AC AC AC AC AC AC AC AC 8 PoE APs AC AC AC AC AC AC AC AC Tablet Laptop Smart Phone Network Devices 2.5G 2.5G UTP with PoE AC 2.4GHz 802.11n AC 5GHz 802.11n 10G 10GBASE-SR/LR Fiber-optic 6

MGS-5220-8P2X Specifications Product IGS-5227-6MT-X Hardware Specifications Copper Ports 8 x 100/1000/2500 BASE-T RJ45 Auto-MDI/MDI-X ports SFP/mini-GBIC Slots 2 x 1/10G BASE-X SFP interfaces with Port-9 to Port-10 PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8 Console 1 x RJ45 serial port (115200 , 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 80Gbps Throughput 59.52Mpps@64Bytes Address Table 16K entries, automatic source address learning and aging Shared Data Buffer 16Mbits IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex Jumbo Frame 9KB < 5 sec: System reboot Reset Button > 5 sec: Factory default System: Fan Alert (Green), SYS (Green), PWR (Green) 100/1000/2500 BASE-T RJ45 Interfaces (Port 1 to Port 8): 100/1000Mbps LNK/ACT (Green) LED 2500 Mbps (Orange) PoE-in-Use (Orange) 1/10G Mbps SFP Interfaces (Port 9 to Port 10): 1G LNK/ACT (Green) 10G Mbps (Orange) Power Requirements 100~240V AC, 50/60Hz Power Consumption (Full Loading) 320 watts/1091.9 BTU (max.) ESD Protection 6KV DC Dimensions (W x D x H) 330 x 200 x 43.5 mm, 1U height Weight 2kg Power over Ethernet PoE Standard IEEE 802.3at PoE Plus, PSE PoE Power Supply Type End-span PoE Power Output Per port 54V DC, max. 30.8 watts Power Pin Assignment 1/2(+), 3/6(-) 240 watts (max.) @ 25 degrees C PoE Power Budget 200 watts (max.) @ 50 degrees C PD @ 7 watts 8 units PoE Ability PD @ 15.4 watts 8 units PD @ 30.8 watts 8 units Layer2 Management Functions Basic Management Interfaces Console , Web browser, SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 Port disable/enable Port Configuration Auto-negotiation 100/1000/2500 Mbps full and half duplex mode selection Flow Control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/Both Port Mirroring Many-to-1 monitor 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs IEEE 802.3ad LACP/Static Trunk Link Aggregation Supports 5 trunk groups with 8 ports per trunk 7

MGS-5220-8P2X Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IGMP (v1/v2/v3) Snooping, up to 255 multicast groups IGMP Snooping IGMP Querier mode support MLD (v1/v2) Snooping, up to 255 multicast groups MLD Snooping MLD Querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 256 entries Per port bandwidth control Bandwidth Control Ingress: 10Kbps~13000Mbps Egress: 10Kbps~13000Mbps RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2737 Entity MIB SNMP MIBs RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2618 RADIUS Client MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Power over Ethernet MIB Layer 3 Functions IP Interfaces Max. 128 VLAN interfaces Routing Table Max. 128 routing entries IPv4 hardware static routing Routing Protocols IPv6 hardware static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ab 1000BASE-T IEEE 802.3bz 2.5GBASE-T IEEE 802.3ae 10Gb/s Ethernet IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control Stability Testing IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 Environment Temperature: 0 ~ 50 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 70 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing) 8

MGS-5220-8P2X Ordering Information MGS-5220-8P2X L2+ 8-Port 2.5G 802.3at PoE + 2-Port 1G/10G SFP+ Managed Multigigabit Switch Available 10Gbps Modules MTB-SR 10GBASE-SR mini-GBIC module - 300m MTB-LR 10GBASE-LR mini-GBIC module – 10km MTB-LA20 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 20km MTB-LB20 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 20km MTB-LA40 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 40km MTB-LB40 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 40km MTB-LA60 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 60km MTB-LB60 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 60km Available 1000Mbps Modules MGB-GT SFP-Port 1000BASE-T Module MGB-SX SFP-Port 1000BASE-SX mini-GBIC module MGB-LX SFP-Port 1000BASE-LX mini-GBIC module MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City MGS-5220-8P2X 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9