産業用イーサネットスイッチ PLANET IVC-234GT

IVC-234GT Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet Extender Long Reach Ethernet • ITU-T G.993.5 G.Vectoring and G.INP • Upstream/Downstream bandwidth up to 200/100Mbps • CO/CPE mode selectable via DIP switch • Selectable target band plan and SNR margin • One BNC/RJ11 connector for VDSL connection • Uses existing RG59/RG6 coaxial cable • Used in pairs to extend Point-to-Point connection up to 1.2km • Supports IEEE 802.1Q VLAN tag transparency High Performance Industrial Gigabit Ethernet Extender To fulfill the needs of long distance and higher speed required Ethernet over Coaxial or 2-wired UTP applications, PLANET Technology offers a new Industrial Ethernet Industrial Case and Installation Extender, IVC-234GT. It features one BNC port and one RJ11 port for long-distance connection with the VDSL2 (Very-high-bit-rate Digital Subscriber Line 2) technology, • Slim-type IP30 metal case and 4 10/100/1000BASE-T RJ45 Ethernet ports. Its slim-sized metal housing makes • DIN rail and wall-mount design the placement of the unit convenient. Working well with a pervasive coaxial or RJ11 network, the IVC-234GT provides an excellent bandwidth of up to a total duplex • 12 to 48V DC, redundant power with polarity reverse data rate of 300Mbps which can extend a maximum distance up to 1.2km. protect function • AC 24V power adapter acceptable If the IP network that consists of HD IP camera, wireless access point, NVR and digital signage display requires an extension of beyond the 100-meter distance, the • Supports 6000 VDC Ethernet ESD protection IVC-234GT will be the best option as it can transmit data over the coaxial cable or • -40 to 75 degrees C operating temperature telephone wire. A 100-meter distance can only be extended on an UTP cable. • Minimum installation time (Simply by Plug and Play) • Supports extensive LED indicators for network diagnosis 1

IVC-234GT Superior Upstream and Downstream Transmission The design of the IVC-234GT is based on the two-core networking technology, Gigabit Ethernet and VDSL2. The IVC-234GT offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides the similar transmission rate on both downstream and upstream while the asymmetric mode performs higher transmission quality in short range. In all, when the IVC-234GT is in the symmetric mode, it provides a better upstream performance, and when it is in the asymmetric mode, it gives a better downstream performance. Ethernet over Long Distance Existing Coaxial or RJ11 Cable The IVC-234GT is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from the existing analog system to full digital system. It features two types of transmission, the coaxial or RJ11. A normal UTP cable can only be extended up to 100 meters, but with the IVC-234GT, the distance for Ethernet networking can be extended up to 1,200 meters (3,937ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial or RJ11 cable in your existing environment, you can install a pair of the IVC-234GT very simply without the need to build additional network wires, thus saving costs for network construction. BN3 C and RJ11 Connection Di3agrams P1 P2 FAULT P1 P2 FAULT CPE CO CPE CO P1 P2 FAULT P1 P2 FAULT 4 VDSL 4 VDSL CPE CPE CO CO CPE CPE CO CO Inter G.INP Inter G.INP SymmVDSL Asymm Symm VDSL Asymm 8dB 12dB 8dB 12dB CPE CO P1 P2 FAULT P1 P2 FAULT CPE CO CPE CO Inter G.INP CPE COVDSL VDSL Inter G.INP Symm Asymm CPE CO CPE COInter G.INP Inter G.INP Symm Asymm Symm Asymm Symm Asymm 1800d0B 12dB 8dB 12dB 8dB 12dB 1080d0B 12dB 1 1000 11000 10/ 1 110/ 10/ 10/ 100 100 100RJ11 100 RJ11 2 2 1000 1000 1 3 3 1 IP Camera 10/ 10/100 100 Switch 4 4 BNC No Connection BNC 2BNC RJ11 RJ11 RJ11 2BNC RJ11 VDSL Port Coax. VDSL Port BNC BNC BNC RJ11 BNC RJ11 VDSL Port VDSL Port 3 CO Mode CPE Mode 3 P1 P2 FAULT P1 P2 FAULT CPE CO CPE CO 4 VDSL 4 VDSL CPE CO CPE CO Inter G.INP Inter G.INP Symm Asymm Symm Asymm 8dB 12dB 8dB 12dB P1 P2 FAULT P1 P2 FAULT CPE CO CPE CO VDSL VDSL CPE CO CPE CO Inter G.INP Inter G.INP Symm Asymm Symm Asymm 1000 8dB 12dB 8dB 12dB 1000 1 1000 11000 10/ 1 110/ 10/ 10/ 100 100 100RJ11 100 RJ11 2 2 3 3 IP Camera Switch 4 4 BNC BNC VDSL2 BNC RJ11 RJ11 RJ11 BNC RJ11 VDSL Port No Connection VDSL Port BNC BNC BNC RJ11 BNC RJ11 VDSL Port VDSL Port CO Mode CPE Mode 1000BASE-T UTP VDSL2 VDSL2 Coaxial Cable Coax. Coaxial Cable 2 1 2 3 4 ON 1 2 3 4 1 2 3 4ON ON 1 2 3 4 1 2 3 4 ON ON 1 2 3 4 1 2 3 4 ON ON 1 2 3 41 2 3 4 1 2 3 4ON ON ON

IVC-234GT Easy and Flexible Installation The IVC-234GT offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one IVC-234GT in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long- distance transmission better. ADSL2+ Fallback For ISPs providing ADSL broadband services, the IVC-234GT can support a downstream rate of up to 24Mbps and an upstream rate of 1Mbps with the ADSL2+ technology. The IVC-234GT can also be directly switched over to VDSL2 after the network upgrade. Applications Point-to-Point Application -- LAN to LAN Connection One set of the IVC-234GT could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one IVC-234GT must be Master (CO mode) and the other one is Slave (CPE mode). LAN to LAN Connection LAN 1 LAN 2 PC VDSL2 PC IVC-234GT Ethernet over Coaxial IVC-234GT (CO) (CPE) Up to 1200m VDSL2 VDSL2 Coaxial Cable 1000BASE-T UTP 3 1 2 3 4 ON 1 2 3 4 ON

IVC-234GT Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable/RJ11 of the IVC-234GT, communities, campuses and enterprises can upgrade their analog camera system to IP camera surveillance system without using additional new wires. As the IVC-234GT comes with one RJ45 port and one BNC Ethernet over Coaxial port, just plug in the UTP cable of IP camera to the Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable. Applications of IP Surveillance LAN 1 LAN 2 IP Camera L2+ Switch IP Camera VDSL2 IVC-234GT Ethernet over Coaxial IP Camera IVC-234GT (CPE) (CO) NVR IP Camera Up to 1200m VDSL2 VDSL2 Coaxial Cable 1000BASE-T UTP Specifications Product IVC-234GT Hardware Specifications TP interface 4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 1 BNC female Ethernet over Coaxial port Coaxial cable: 75 ohm BNC Cabling RG-6/U cable, less than12Ω/1000 ft Interface RG-59/U cable, less than 30Ω/1000 ft. Maximum Distance Max. 1.2km with data transmission (3.937ft.) RJ11 1 VDSL2/ADSL2+ RJ11 female phone jackTwisted-pair telephone wires (AWG-24 or better) up to 1.2km (3.937ft.) DIP-1 Select CO or CPE mode DIP Switch & Functionality DIP-2 Select G.INP or Interleaved modeDIP-3 Select Band Profile (Asymmetric or Symmetric) DIP-4 Select SNR of 12dB or 8dB Power 1/Power 2: Green FAULT: Red 1000BASE-T LNK/ACT: Green LED Indicator 10/100BASE-TX LNK/ACK: Green VDSL: Green CO: Green CPE: Green ESD Protection 6KV DC Enclosure IP30 slim metal case Installation DIN-rail kit or wall-mount ear Dimensions (W x D x H) 32 x 135 x 87.8mm Weight 185g Power Requirement DC input: Dual 12~48V DC, 0.4A max.24V AC Power Consumption 5.7 watts 4 1 2 3 4 ON 1 2 3 4 ON

IVC-234GT Performance Interleave (Upstream/Downstream) Switch CO DIP Distance Asymmetric Symmetric (meters) 8dB 12dB 8dB 12dB 200 93/190 85/174 143/148 132/136 400 67/164 59/146 118/119 103/104 600 38/116 28/94 71/75 59/60 800 24/59 22/49 49/36 38/27 1000 9/45 7/40 21/25 15/24 Upstream/ 1200 6/30 3/28 16/24 6/20 Downstream Performance Table with RJ11 Cable Interleave (Upstream/Downstream) Switch D CO DIP istance Asymmetric Symmetric (meters) 8dB 12dB 8dB 12dB 200 92/190 85/174 143/148 129/136 400 68/165 57/144 116/115 99/96 600 37/112 28/94 71/69 61/55 800 27/56 22/49 49/32 39/24 1000 9/46 7/40 19/27 15/26 1200 5/31 3/28 16/23 12/20 Interleave (Upstream/Downstream) Switch CO DIP Distance Asymmetric Symmetric (meters) 8dB 12dB 8dB 12dB 200 84/184 75/169 131/144 125/128 400 49/148 54/128 93/118 89/99 600 36/100 26/80 77/66 64/53 800 21/50 17/39 44/30 37/26 1000 7/42 5/29 20/25 19/28 Upstream/ Downstream Performance Table 1200 5/27 3/28 13/27 15/20 with Coaxial Cable Interleave (Upstream/Downstream) Switch CO DIP Distance Asymmetric Symmetric (meters) 8dB 12dB 8dB 12dB 200 89/185 79/166 140/144 117/123 400 57/155 47/137 104/113 89/96 600 33/75 31/73 62/73 52/43 800 17/66 13/45 40/29 39/24 1000 13/59 6/38 20/27 15/26 1200 4/32 3/22 14/20 12/20 Switch Specifications Switch Processing Scheme Store-and-Forward Address Table 2K entries Flow Control Back pressure for half duplexIEEE 802.3x pause frame for full duplex Jumbo Packet Size 9K bytes System Specifications VDSL-DMT ITU-T G.993.1 VDSL ITU-T G.997.1 VDSL Compliance ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G. Vectoring ITU-T G.998 G.INP Capable of ADSL2/2+ standard ADSL Compliance ITU G.992.3 G.dmt.bisITU G.992.5 G.dmt.bisplus Data Rate: Up to 24Mbps System Specifications IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet Standards Compliance ITU-T G.993.1 VDSLITU-T G.997.1 ITU-T G.993.2 VDSL2 (Profile 17a/30a Support) ITU-T G.993.5 G.Vectoring and G.INP ITU-T G.998 Regulatory Compliance FCC Part 15 Class A, CE 5

IVC-234GT Environment Temperature Operating: -40~75 degrees CStorage: -40~75 degrees C Humidity Operating: 5~95% (non-condensing)Storage: 5~95% (non-condensing) Diagram Top View Mounting Kit Side View Front View Side View Rear View P1 P2 FAULT CPE CO VDSL CPE CO Inter G.INP Symm Asymm 8dB 12dB DIN-Rail Kit 1000 1 10/ 100 2 3 4 RJ11 BNC BNC RJ11 Bottom View Mounting Kit Dimensions ( unit = mm ) Ordering Information IVC-234GT Industrial 1-Port BNC/RJ11 to 4-Port Gigabit Ethernet Extender Related Products VC-231G 1-Port 10/100/1000T Ethernet to VDSL2 Converter VC-234G 4-Port 10/100/1000T Ethernet to VDSL2 Bridge VC-232G 1-Port 10/100/1000T Ethernet over Coaxial Converter VC-231GP 1-Port 10/100/1000T 802.3at PoE + Ethernet to VDSL2 Converter PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IVC-234GT Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 6 1A@24V 1 2 3 4 ON V1+ V1- V2+ V2- Input PWR1 Fault PWR2 DC12~48V, AC 24V