工業用イーサネットスイッチ PLANET ISW-801T

ISW-801T 8-Port 10/100TX Industrial Fast Ethernet Switch (-40~75 degrees C operating temperature) Physical Port • 8-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function Layer 2 Features • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE- TX Ethernet standard • Supports auto-negotiation and 10/100Mbps half/full duplex mode Slim Type with more Practicability and Convenience • High performance Store and Forward architecture; runt/CRC PLANET ISW-801T, an Industrial 8-port Fast Ethernet Switch, provides non-blocking filtering eliminates erroneous packets to optimize the network wire-speed performance in harsh industrial environment. It also provides 8-port bandwidth 10/100BASE-TX RJ45 copper interfaces delivered in an IP30 rugged, strong case with • Prevents packet loss with back pressure (half-duplex) and redundant power system. Its slim case is suitable for such applications as surveillance IEEE 802.3x pause frame flow control (full-duplex) system deployments, control management and wireless service in climatically demanding • Backplane (switching fabric): 1.6Gbps environments with wide temperature range from -40 to 75 degrees C. • Integrated address look-up engine, supporting 1K absolute MAC addresses Energy Saving with Lower Power Consumption • Automatic address learning and address aging The ISW-801T, adopting the advanced green networking technology, provides the IEEE 802.3az protocol based power saving. This feature makes the ISW-801T consume very Industrial Case & Installation low power in full load operation mode, , which helps conserve energy effectively but • IP30-rated metal case maintains high performance efficiently. • DIN rail and wall-mount design Stable Performance under Difficult Environments • 12 to 48V DC, redundant power with polarity reverse The ISW-801T provides a high level of immunity against electromagnetic interference protection function and connective removable terminal block and heavy electrical surges which are usually found on plant floors or in curb-side traffic for master and slave power, 24V AC power support control cabinets. Being able to operate under the temperature range from -40 to 75 • Lower Power Consumption device in full load operation mode degrees C, the ISW-801T can be placed in almost any difficult environment. The ISW- • Supports EFT protection for 6000 VDC for power line • Supports 6000 VDC Ethernet ESD protection 801T also possesses an integrated power supply source with wide range of voltages (12 • -40 to 75 degrees C operating temperature to 48V DC, 24V AC) for worldwide high availability applications requiring dual or backup • Free fall, shock-proof and vibration-proof for industries power inputs. IP camera IP camera Control Room ISW-801T Robotic Automation Robotic Automation System 100BASE-TX UTP 1

ISW-801T Robust Switch Performance Built in a high-performance switch architecture, the ISW-801T comes with eight 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1.6Gbps, and the 1K MAC address. Thus, the ISW-801T can transfer wire-speed packets without the risk of packet loss. The flow control function enables the ISW-801T to provide fast and reliable data transfer. All of the RJ45 copper interfaces in the ISW-801T support 10/100Mbps auto negotiation for optimal speed detection through RJ45 Category 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables. Applications Industrial Area Switch for Data Collection and Forwarding The ISW-801T’s IP30-rated metal case is particularly designed for the most heavy industrial demanding environments, such as factories, harbors, warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data. Backbone Switch ISW-501T 100m 100m Serial Device ISW-501T Server 100m Internet Industrial Camera Control Center Serial Internet Camera Internet Converter Camera I/O ISW-801T Industrial PLC Serial I/O Harbor Converter Warehouse Internet PLC Camera I/O ROBOT I/O ROBOT 100BASE-TX UTP Factory I/O DI/DO 2

ISW-801T Specifications Model ISW-801T Hardware Specifications 10/100BASE-TX Auto MDI/MDIX Ports 8 3 x LED for System and Power – Green: DC Power 1 LED Indicators – Green: DC Power 2– Green: Power Fault 1x LED for each Copper Port – Green: 10/100 LNK/ACT Enclosure IP30-rated metal case Dimensions (W x D x H) 135 x 87 x 32 mm Weight 428g ESD Protection 6KV DC EFT Protection 6KV DC Power Requirements 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support Power Consumption / Dissipation 2.1 watts/7.1BTU Installation DIN rail kit and wall-mount ear Alarm Provides one relay output for power failureAlarm relay current carry ability: 3A @ DC 30V Connector Removable 6-pin terminal blockPin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Switch Specifications Switch Processing Scheme Store-and-Forward Address Table 1K Buffer Memory Embedded 448K bits packet buffer Flow Control Back pressure for half duplex,IEEE 802.3x pause frame for full duplex Switch Fabric 1.6Gbps Throughput (packet per second) 1.19Mpps Network Cables 10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters Standards Conformance IEEE 802.3 Ethernet Standards Compliance IEEE 802.3u Fast EthernetIEEE 802.3x Full Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet Temperature Operating: -40~75 degrees CStorage: -40~75 degrees C Humidity Operating: 5% to 95%, Storage: 5% to 95% (non-condensing) Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock-proof) IEC60068-2-6 (vibration-proof) Ordering Information ISW-801T 8-Port 10/100TX Industrial Fast Ethernet Switch (-40~75 degrees C operating temperature) 3

ISW-801T Side View Front View Bottom View Top View Rear View P1 P2 FAULT 1 Mounting Kit 2 3 4 DIN-Rail Kit 5 6 7 8 10/100 LNK ACT ISW-801T Mounting Kit Dimensions ( unit = mm ) Related Products ISW-511/ISW-511S15 4-Port 10/100BASE-TX + 1-Port 100BASE-FX Industrial Fast Ethernet Switch (-10~60 degrees C operating temperature) ISW-511T/ISW-511TS15 4-Port 10/100BASE-TX + 1-Port 100BASE-FX Industrial Fast Ethernet Switch w/Wide Operating Temperature (-40~75 degrees C) ISW-621/ISW-621S15 4-Port 10/100BASE-TX + 2-Port 100BASE-FX Industrial Fast Ethernet Switch (-10~60 degrees C operating temperature) ISW-621T/ISW-621TS15 4-Port 10/100BASE-TX + 2-Port 100BASE-FX Industrial Fast Ethernet Switch w/Wide Operating Temperature (-40~75 degrees C) ISW-501T 5-Port 10/100BASE-TX Industrial Fast Ethernet Switch w/Wide Operating Temperature (-40~75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, ISW-801Tv2 Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 4 40.00 40.00 28.00 48.80 28.00 28.00 18.00 28.00 18.00 28.00 53.50 53.50 18.00 46.50 48.80 39.70 97.10 87.80 87.80 9.20 135.00 87.80 15.20 32.00 30.00 135.00 87.80