産業用イーサネットスイッチ PLANET IGS-620TF

IGS-620TF Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Ethernet Switch Physical Port • 4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function • 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured Fiber Port Redundancy Flexible, Reliable and Industrial-grade Network Distance Extension Solution • Link status auto-detect and redundant on Dual ports PLANET IGS-620TF is an Industrial 6-port full Gigabit Ethernet Switch providing non- with the same connector type blocking wire-speed performance and great flexibility for Gigabit Ethernet extension in • Only Primary-Port is active at a time, the Backup-Port harsh industrial environment. It provides 4-port 10/100/1000Base-T RJ-45 copper and is blocked 2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system. The IGS-620TF is well suited for applications in • When Primary-Port link failure occurs, the traffic will deploying surveillance system, and securing control and wireless service in climatically swap to Backup-Port automatically. demanding environments with wide temperature range from -40 to 75 degrees C. • Once the Primary-Port status is back to link-up, the Fiber-Optical Link Capability Enables Extension of Network Deployment traffic will swap from Backup-Port to Primary-Port. The two SFP slots are compatible with 100Base-FX or 1000Base-SX / LX / WDM through SFP (Small Form Factor Pluggable) fiber-optic transceivers. The fiber optical uplink capability guarantees the throughput to all nodes hooked into the network and the Layer 2 Features Gigabit Ethernet distance can be extended from 550 meters (Multi-Mode fiber cable) up • Supports Auto-negotiation and 10/100Mbps half / full to 10/20/30/40/50/70/120 kilometers (Single-Mode fiber cable), also the Fast Ethernet duplex and 1000Mbps full duplex mode distance can be extended from 2km (Multi-Mode fiber cable) up to 20/40/60 kilometers (Single-Mode fiber cable). They are well suited for applications within the factory data • High performance Store and Forward architecture, centers and distributions. runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Fiber Switch Mode — Distance Extension • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full- MGB-L120 Duplex) IGS-620TF Switch Mode • 9K Jumbo Frame Size support MGB-L120 • Backplane (Switching Fabric): 12Gbps 1000 1000 • Integrated address look-up engine, support 1K 1000Base-X Fiber 1000Base-X Fiber Gigabit Gigabit Ethernet Switch Ethernet Switch absolute MAC addresses 240km • Automatic address learning and address aging • CSMA/CD Protocol 1000 1000Base-SX/LX Fiber-optic 1

IGS-620TF Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode The two SFP slots allow to change the operation mode with its built-in DIP switch. Via Industrial Case / Installation the built-in DIP switch, the IGS-620TF can be configured as 6-port Ethernet switch or 4+2 fiber redundant mode. With the 6-port switch mode, the IGS-620TF can operate in • Slim IP30 metal case protection Store-and-Forward mechanism with high performance; on the other hand, when in the • DIN Rail and Wall Mount Design 4+2 fiber redundant mode, it provides rapid fiber redundancy of link for highly critical • Redundant Power Design Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of – 12 to 48V DC, redundant power with polarity the backup pair. reverse protect function – AC 24V power adapter acceptable • Supports EFT protection 6000 VDC for power line Site to Site Fiber Link Redundancy — ISP, Bank and Enterprise • Supports 6000 VDC Ethernet ESD protection Primary Link 1000Base-X Fiber • -40 to 75 degrees C operating temperature IGS-620TF (Forwarding) IGS-620TF 1000 Redundant Redundant Industrial Switch 10Km Industrial Switch Redundant Link 1000Base-X Fiber (Disabled) 10/100/1000Base-T UTP 10/100/1000Base-T UTP Gigabit Gigabit Ethernet Switch Ethernet Switch Location A Location B 1000Base-T UTP 1000 1000Base-SX/LX Fiber-optic Environmentally Hardened Design The IGS-620TF is equipped with the slim-type IP30 metal case for easy deployment in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-620TF provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-620TF can be placed in almost any difficult environment. The IGS-620TF also allows either DIN rail or wall mounting for efficient use of cabinet space. Convenient and Reliable Power System To enhance the operation reliability and flexibility, the IGS-620TF is equipped with two DC power input connectors for redundant power supply installation. It also possesses an integrated power supply source with wide-ranging voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs. 2

IGS-620TF Application Hardened Environment Application The IGS-620TF Industrial Gigabit Ethernet Switch offers full port Gigabit speed. It provides very high reliability and security features to make sure the continuous operation in harsh environments such as control cabinet of transportation, factory, outdoors and places where extreme low or high temperatures can be experienced. Moreover, the IGS-620TF is also compatible with 100Mbps and 1000Mbps SFP transceivers to provide a strong, stable and long- distance connection and flexible industrial networking deployment. Weather Station Desert IP Camera IP Camera IP Camera IGS-620TF IP Camera 120km 1000 IGS-620TF 30km 1000 Fiber Switch 70km Data Center 30km 1000 1000 IGS-620TF IP Camera IP Camera 1000 30km 30km 120km 30km 1000 1000 1000 IGS-620TF IGT-1205AT IGT-1205AT Winter Season of Country Steel Factory IGS-620TF 100Base-TX UTP 1000 1000Base-SX/LX Fiber-optic Redundancy Application The IGS-620TF Industrial Gigabit Ethernet Switch provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link-down, it forwards the packet to the other port of the backup pair. Link Path Redundant to Critical Network Service Server 1000 (ATM/ Primary Link IGS-620TF IP Camera/ 1000Base-X Fiber Security Machine) Gigabit (Forwarding) Redundant Ethernet Switch Industrial Switch Data Server Redundant Link Gigabit 1000Base-X Fiber Ethernet Switch (Disabled) 1000Base-T UTP 1000 1000Base-SX/LX Fiber-optic 3

IGS-620TF Specifications Model IGS-620TF Hardware Specifications 4 x 10/100/1000Base-T RJ-45 TP Copper Ports Auto-MDI/MDI-X, Auto-Negotiation 2 1000Base-SX/LX/BX SFP interfaces (Port-5 and Port-6) SFP / mini-GBIC Slots Compatible with 100Base-FX SFP ƒ DIP-1: SFP Port 5 1000Base-X (default) / 100Base-FX DIP Switch ƒ DIP-2: SFP Port 6 1000Base-X (default)/ 100Base-FX ƒ DIP-3: Switch mode / Fiber Redundant mode Removable 6-pin terminal block Connector Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Provides one relay output for power failure Alarm Alarm Relay current carry ability: 1A @ DC 24V 3 x LED for System and Power: ƒ Green: DC Power 1 ƒ Green: DC Power 2 ƒ Green: Power Fault LED 2 x LED for Per Copper Port (Port-1~Port-4): ƒ Green: 1000 LNK/ACT ƒ Orange:100 LNK/ACT 1 x LED for Per mini-GBIC interface (Port-5 and Port-6) ƒ Green: LNK/ACT ESD Protection 6KV DC EFT Protection 6KV DC Enclosure IP30 type metal case Installation DIN rail kit and wall mount ear Dimensions (W x D x H) 135 x 87 x 32mm Weight 503g DC 12~48V or AC 24V Power Requirements Redundant power with polarity reverses protection function Power Consumption / Dissipation 7.2watts / 24BTU 10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters Twisted-Pair 100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters 1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters ƒ 1000Base-SX : Cable 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m ƒ 1000Base-LX : Fiber-Optic Cable 9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (vary on SFP module) ƒ 100Base-FX : 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2 kilometers 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (vary on SFP module) Switch Specification Switch Processing Scheme Store-and-Forward Address Table 1K entries Flow Control Back pressure for half duplex Switch fabric IEEE 802.3x Pause Frame for full duplex Throughput (packet per second) 8.93Mpps@64bytes Maximum Transmit Unit 9216 bytes SX/LX: 2000Mbps (full-duplex) Speed FX: 200Mbps (full-duplex) TP: 10/20Mbps, 100/200Mbps, 2000Mbps Standards Conformance IEEE 802.3 Ethernet / 10Base-T IEEE 802.3u Fast Ethernet / 100Base-TX Standards Compliance IEEE 802.3ab Gigabit Ethernet / 1000Base-T IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX IEEE 802.3x Full-Duplex Flow Control 4

IGS-620TF Regulation Compliance FCC Part 15 Class A, CE IEC60068-2-32(Free fall) Stability Testing IEC60068-2-27(Shock) IEC60068-2-6(Vibration) Environment Operating: -40~75 degrees C Temperature Storage: -40~75 degrees C Operating: 5~95% (Non-condensing) Humidity Storage: 5~95% (Non-condensing) Dimensions Side View V1- PWR1 V1+ Fault V2- PWR2 V2+ Port 5 Port 6 Mode ON OFF Port 5 100FX 1000X Port 6 100FX 1000X Fiber Mode Redundant Switch Front View Bottom View Top View Rear View P1 P2 FAULT 1000X SFP 6 Mounting Kit LNK / ACT 1000X SFP 5 LNK / ACT 100 LNK/ACT 1000 LNK/ACT DIN-Rail Kit 4 3 2 1 IGS-620TF Mounting Kit Dimensions ( unit = mm ) 5 Input DC 12~48V, AC 24V 1 2 3 4 5 6 1 2 3 ON

IGS-620TF Ordering Information IGS-620TF Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Ethernet Switch Related SFP Transceivers Fast Ethernet Transceiver (100Base-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60OC MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60OC MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60OC MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60OC MFB-F120 100 LC Single Mode 120km 1550nm 0 ~ 60OC MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75OC MFB-TF20 100 LC Single Mode 20km 1550nm -40 ~ 75OC Fast Ethernet Transceiver (100Base-BX, Single Fiber Bi-Directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength(RX) Operating Temp. MFB-FA20 100 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60OC MFB-FB20 100 WDM(LC) Single Mode 20km 1550nm 1310nm 0 ~ 60OC MFB-TFA20 100 WDM(LC) Single Mode 20km 1310nm 1550nm -40 ~ 75OC MFB-TFB20 100 WDM(LC) Single Mode 20km 1550nm 1310nm -40 ~ 75OC MFB-TFA40 100 WDM(LC) Single Mode 40km 1310nm 1550nm -40 ~ 75OC MFB-TFB40 100 WDM(LC) Single Mode 40km 1550nm 1550nm -40 ~ 75OC Gigabit Ethernet Transceiver (1000Base-X SFP) Connector Model Speed (Mbps) Fiber Mode Distance Wavelength (nm) Wavelength Interface MGB-GT 1000 Copper -- 100m -- 0 ~ 60OC MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60OC MGB-SX2 1000 LC Multi Mode 2km 1310nm 0 ~ 60OC MGB-LX 1000 LC Single Mode 10km 1310nm 0 ~ 60OC MGB-L30 1000 LC Single Mode 30km 1310nm 0 ~ 60OC MGB-L40 1000 LC Single Mode 40km 1550nm 0 ~ 60OC MGB-L50 1000 LC Single Mode 50km 1550nm 0 ~ 60OC MGB-L70 1000 LC Single Mode 70km 1550nm 0 ~ 60OC MGB-L120 1000 LC Single Mode 120km 1550nm 0 ~ 60OC MGB-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75OC MGB-TLX 1000 LC Single Mode 10km 1310nm -40 ~ 75OC MGB-TL30 1000 LC Single Mode 30km 1310nm -40 ~ 75OC MGB-TL50 1000 LC Single Mode 50km 1550nm -40 ~ 75OC 6

IGS-620TF Gigabit Ethernet Transceiver (1000Base-BX, Single Fiber Bi-Directional SFP) Connector Model Speed (Mbps) Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. Interface MGB-LA10 1000 WDM(LC) Single Mode 10km 1310nm 1550nm 0 ~ 60OC MGB-LB10 1000 WDM(LC) Single Mode 10km 1550nm 1310nm 0 ~ 60OC MGB-LA20 1000 WDM(LC) Single Mode 20km 1310nm 1550nm 0 ~ 60OC MGB-LB20 1000 WDM(LC) Single Mode 20km 1550nm 1310nm 0 ~ 60OC MGB-LA40 1000 WDM(LC) Single Mode 40km 1310nm 1550nm 0 ~ 60OC MGB-LB40 1000 WDM(LC) Single Mode 40km 1550nm 1310nm 0 ~ 60OC MGB-LA60 1000 WDM(LC) Single Mode 60km 1310nm 1550nm 0 ~ 60OC MGB-LB60 1000 WDM(LC) Single Mode 60km 1550nm 1310nm 0 ~ 60OC MGB-TLA10 1000 WDM(LC) Single Mode 10km 1310nm 1550nm 0 ~ 60OC MGB-TLB10 1000 WDM(LC) Single Mode 10km 1550nm 1310nm -40 ~ 75OC MGB-TLA20 1000 WDM(LC) Single Mode 20km 1310nm 1550nm -40 ~ 75OC MGB-TLB20 1000 WDM(LC) Single Mode 20km 1550nm 1310nm -40 ~ 75OC MGB-TLA40 1000 WDM(LC) Single Mode 40km 1310nm 1550nm -40 ~ 75OC MGB-TLB40 1000 WDM(LC) Single Mode 40km 1550nm 1310nm -40 ~ 75OC MGB-TLA60 1000 WDM(LC) Single Mode 60km 1310nm 1550nm -40 ~ 75OC MGB-TLB60 1000 WDM(LC) Single Mode 60km 1550nm 1310nm -40 ~ 75OC PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City C-IGS-620TF 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2013 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 7