産業用イーサネットスイッチ PLANET IGS-5227-6T

IGS-5227-6T Industrial IP67-rated 6-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) Physical Port • 6-port 10/100/1000BASE-T waterproof and dustproof RJ45 copper Hardware Conformance • IP67-rated aluminum case • Redundant power design – 9 to 48V DC, redundant power with polarity reverse protect function – Active-active redundant power failure protection – Backup of catastrophic power failure on one supply – Fault tolerance and resilience – 24V AC power input acceptable Performance Not Affected by Industrial Conditions PLANET IGS-5227-6T Industrial Managed Ethernet Switch comes with an IP67- • DIN-rail and wall-mount design rated industrial case, 6-port 10/100/1000T, and static Layer 3 routing, providing • Supports Ethernet ESD protection of 6000V DC a high level of immunity against electromagnetic interference and heavy electrical • -40 to 75 degrees C operating temperature surges which are usually found on plant floors or in curb-side traffic control cabinets. The IGS-5227-6T can be easily mounted on a DIN rail or wall taking up Layer 3 IP Routing Features less space. It provides a quick, safe, cost-effective and high-performance network • Supports maximum 32 static routes and route solution to IP security surveillance for small businesses and enterprises. summarization IP67 Rugged Case Layer 2 Features • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to 6 x Waterproof Gigabit RJ45 optimize the network bandwidth • Storm control support – Broadcast/Multicast/Unicast • Supports VLAN – IEEE 802.1Q tagged VLAN 9~48V DC, 24V DC Waterproof Redundant Power Input – Up to 255 VLANs groups, out of 4095 VLAN IDs – Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) Waterproof and Dustproof RJ45 Ethernet Connector and Shielded Plug – Protocol-based VLAN The IGS-5227-6T is equipped with a 6-port 10/100/1000BASE-T auto-negotiation – MAC-based VLAN waterproof and dustproof RJ45 connector. These shielded RJ45 plugs can – IP subnet-based VLAN make the general UTP cable waterproof and dustproof. When connected to the – Voice VLAN waterproof and dustproof RJ45 connector, it provides tight and strong connection, • Supports Spanning Tree Protocol and comes with the industrial protection rating of IP67 capable of withstanding – IEEE 802.1D Spanning Tree Protocol (STP) humidity, dirt, dust, shock, vibrations, heat and cold. – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard 1

IGS-5227-6T • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) – Maximum 3 trunk groups, with 2 ports for each trunk – Up to 4Gbps bandwidth (full duplex mode) • Provides port mirror (many-to-1) • Port mirroring monitors the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops • Supports E.R.P.S. (Ethernet Ring Protection Switching) Environmentally Hardened Design • IEEE 1588 and Synchronous Ethernet network timing The IGS-5227-6T is able to protect itself from dust and water ingress, and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the Quality of Service highest level of reliability for mission-critical applications in any difficult environment. • Ingress shaper and egress rate limit per port bandwidth control • 8 priority queues on all switch ports • Traffic classification – IEEE 802.1p CoS – ToS/DSCP/IP precedence of IPv4/IPv6 packets – IP TCP/UDP port number – Typical network application • Strict priority and Weighted Round Robin (WRR) CoS policies • Traffic-policing policies on the switch port Dual Power Input for High Availability Network System • DSCP remarking The IGS-5227-6T features a strong dual power input system (Dual 9~48V DC, 24V AC) incorporated into customer’s automation network to enhance system reliability and Multicast uptime. For example, when DC Power 1 fails to work, the hardware failover function • Supports IGMP snooping v1, v2 and v3 will be activated automatically to keep powering the IGS-5227-6T via DC Power 2 • Supports MLD snooping v1 and v2 alternatively without any loss of operation. • Querier mode support • IGMP snooping port filtering SMTP/SNMP Trap Event Alert Though most NVR or camera management software offers SMTP email alert function, • MLD snooping port filtering the IGS-5227-6T further provides event alert function to help to diagnose the abnormal • MVR (Multicast VLAN Registration) device owing to whether or not there is a break of the network connection, or loss of power. Security SMTP/SNMP Trap Event Alert • Authentication – IEEE 802.1x port-based/MAC-based network access IGS-5227-6T authentication E-mail Alert – IEEE 802.1x authentication with guest VLAN – Built-in RADIUS client to cooperate with the RADIUS Malfunction servers – RADIUS/TACACS+ users access authentication • Access Control List – IP-based Access Control List (ACL) – MAC-based Access Control List (ACL) IP Camera IP Camera 2

IGS-5227-6T Featuring Fast Recovery for Critical Network Applications • Source MAC/IP address binding The IGS-5227-6T supports redundant ring technology and features strong, rapid self- • DHCP Snooping to filter distrusted DHCP messages recovery capability to prevent interruptions and external intrusions. It incorporates • Dynamic ARP Inspection discards ARP packets with advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, invalid MAC address to IP address binding Spanning Tree Protocol (802.1s MSTP), and redundant power input system into • IP Source Guard prevents IP spoofing attacks customer’s industrial automation network to enhance system reliability and uptime in • IP address access management to prevent unauthorized harsh factory environments. In a certain, simple Ring network, the recovery time of data intruder link is within 20ms. Management Office Factory • IPv4 and IPv6 dual stack management 1000 • Switch Management Interfaces Industrial MAN Switch – Telnet command line interface Industrial 10G Switch – Web switch management 1000 – SNMP v1, v2c, and v3 switch management E.R.P.S. Ring for Metropolitan Area Network Application – SSH/SSL secure access Recovery Time < 50ms • IPv6 address/NTP management • Built-in Trivial File Transfer Protocol (TFTP) client • BOOTP and DHCP for IP address assignment • System Maintenance – Firmware upload/download via HTTP/TFTP 8-port MAN Switch – Reset button for system reboot or reset to factory default IGS-5227-6T Control Center – Dual images Highway • DHCP relay and option 82 IPv6/IPv4 Dual Stack • User privilege levels control Supporting both IPv6 and IPv4 protocols, the IGS-5227-6T helps data centers, • NTP (Network Time Protocol) campuses, telecoms, and more to experience the IPv6 era with the lowest investment as • Link Layer Discovery Protocol (LLDP) and LLDP-MED its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network • Network diagnostic is set up. – Cable diagnostic technology provides the mechanism to detect and report potential cabling issues Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management – ICMPv6/ICMPv4 remote ping The IGS-5227-6T not only provides ultra high transmission performance, and excellent • SMTP/Syslog remote alarm Layer 2 and Layer 4 technologies, but also Layer 3 IPv4/IPv6 VLAN routing feature • Four RMON groups (history, statistics, alarms and events) which allows to cross over different VLANs and different IP addresses for the purpose of • SNMP trap for interface link up and link down notification having a highly-secure, flexibly-managed and simple networking application. • PLANET Smart Discovery Utility for deployment management Robust Layer 2 Features The IGS-5227-6T can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. Via the link aggregation of supporting ports, the IGS-5227-6T allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail- over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch 3

IGS-5227-6T Powerful Security The Switch offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user, and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The IGS-5227-6T also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Excellent Traffic Control The IGS-5227-6T is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission. Efficient and Secure Management With built-in Web-based management interface, the IGS-5227-6T L2+ Managed Switch offers an easy-to-use, platform-independent management and configuration facility which includes Web and SNMP management interfaces. The SNMP can be managed via any management software based on the standard of SNMP Protocol. For reducing product learning time, it offers Cisco-like command via Telnet and customer does not need to learn new console command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. IGS-5227-6T 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH 1588 Time Protocol for Industrial Computing Networks The IGS-5227 series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5227 series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 4

IGS-5227-6T Applications High Availability Networking Solution for Surveillance System The Switch has the capability to rapidly recover itself in case there are interruptions or external instrusions. As the ITU-T G.8032 ERPS is employed, the reliability and uptime of the network can be greatly enhanced. Thus, the IGS-5227-6T, with its redundant connection and high bandwidth, is ideal for building an IP-based surveillance infrastructure in public transportation. Control Center IGS-5227-6T IGS-5227-6T IGS-5227-6T Dual Band AP Dual Band AP ERPS Ring Recovery time <50 ms IP Camera IP Camera Railway Platform 100BASE-TX UTP 1000BASE-T UTP Layer 2+ VLAN Static Routing With the built-in robust Layer 3 routing protocols, the IGS-5227-6T ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 32 routing entries. The IGS-5227-6T, certainly an ideal solution for industries, offers greater security, control and bandwidth conservation, and high-speed uplink. IP Surveillance Domain Wireless AP Domain 192.168.10.x/24 Industrial IP67-rated 192.168.20.x/24 Ethernet Switch NVR IGS-5227-6T IP Camera Dual Band Wireless AP 1000BASE-T UTP 5

IGS-5227-6T Specifications Product IGS-5227-6T Hardware Specifications Copper Ports 6 10/100/1000BASE-T waterproof and dustproof RJ45 auto-MDI/MDI-X ports Switch Architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput 8.9Mpps@64bytes Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4M bits IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex Jumbo Frame 9K bytes < 5 sec: System reboot Reset Button > 5 sec: Factory default Dimensions (W x D x H) 103 x 68.3 x 163 mm Weight 1069g System: DC1 (Green), DC2 (Green), Fault (Red) LED Ring (Green), R.O. (Green) 10/100/1000T RJ45 Interfaces LNK/ACT (Green) Power Consumption Max. 8.3 watts/ 28.5 BTU Power Requirements Dual 9~48V DC, 24V AC ESD Protection 6KV DC Layer 2 Management Functions Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status TX/RX/Both Port Mirroring Many-to-1 monitor 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs IEEE 802.3ad LACP/static trunk Link Aggregation 3 groups with 2 port per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IGMP snooping v1, v2, v3, up to 255 multicast groups IGMP Snooping IGMP querier mode support MLD snooping v1, v2, up to 255 multicast groups MLD Snooping MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 256 entries Per port bandwidth control Bandwidth Control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps Layer 3 Functions IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries IPv4 software static routing Routing Protocols IPv6 software static routing 6

IGS-5227-6T Management Basic Management Interfaces Telnet/Web browser/SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 2933 IGMP-STD-MIB RFC 1643 Ethernet MIB RFC 3411 SNMP-Frameworks-MIB RFC 2863 Interface MIB RFC 4292 IP Forward MIB SNMP MIBs RFC 2665 Ether-Like MIB RFC 4293 IP MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 4836 MAU-MIB RFC 2737 Entity MIB IEEE 802.1X PAE RFC 2618 RADIUS Client MIB LLDP Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.1ab LLDP IEEE 802.3u 100BASE-TX RFC 768 UDP IEEE 802.3ab Gigabit 1000T RFC 793 TFTP IEEE 802.3x flow control and back pressure RFC 791 IP IEEE 802.3ad port trunk with LACP RFC 792 ICMP Standards Compliance IEEE 802.1D Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1w Rapid Spanning Tree Protocol RFC 1112 IGMP v1 IEEE 802.1s Multiple Spanning Tree Protocol RFC 2236 IGMP v2 IEEE 802.1p Class of Service RFC 3376 IGMP v3 IEEE 802.1Q VLAN tagging RFC 2710 MLD v1 IEEE 802.1X Port Authentication Network Control FRC 3810 MLD v2 Environment Temperature: -40 ~ 75 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -40 ~ 80 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing) Drawing LNK/ACT LNK ACT 1 2 LNK/ACT 3 4 LNK/ACT 5 6 V2 V1 FAULT V2 V1 PWR 2 R.O. PWR 1 Ring INPUT IP67 Mgt. DC 9~48V IGS-5227-6T Dimensions (unit = mm) 7

IGS-5227-6T Ordering Information IGS-5227-6T Industrial IP67-rated 6-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) Related Products IGS-5227-6MT Industrial IP67-rated 6-Port 10/100/1000T M12 Managed Ethernet Switch(-40~75 degrees C, A-coded M12) IGS-5227-6MT-X Industrial IP67-rated 6-Port 10/100/1000T M12 Managed Ethernet Switch (-40~75 degrees C, X-coded M12) IGS-604HPT-RJ Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IGS-604HPT-M12 Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IGS-5226-4P2T Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) ISW-800T-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch (-40~75 degrees C) ISW-804PT-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch with 4-Port PoE (-40~75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-5227-6T 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 8