ウルトラPoE PLANET IGS-5225-4UP1T2S

IGS-5225-4UP1T2S Industrial L2+ 4-Port 10/100/1000T Ultra PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch Physical Port • 4 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with Ultra PoE Injector • 1 10/100/1000BASE-T Gigabit Ethernet RJ45 ports ports • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection • One RJ45 console interface for basic management and setup Power over Ethernet • Ultra Power over Ethernet end-span/mid-span PSE • Backward compatible with IEEE 802.3at/af PD device • Up to 4 ports of IEEE 802.3af/IEEE 802.3at/Ultra PoE Environmentally Hardened Design devices powered PLANET Industrial 4-port Gigabit Ultra PoE Switch, IGS-5225-4UP1T2S, is • Supports PoE power up to 72 watts for each PoE port equipped with a rugged IP30 metal case for stable operation in heavy industrial • 240-watt PoE budget demanding environments. Thus, the IGS-5225-4UP1T2S provides a high level of • Auto detects powered device (PD) immunity against electromagnetic interference and heavy electrical surges which • Circuit protection prevents power interference between ports are usually found on plant floors or in curbside traffic control cabinets. • Remote power feeding up to 100m • PoE management features Being able to operate under wide temperature range from -40 to 75 degrees C, – Total PoE power budget control the IGS-5225-4UP1T2S can be placed in almost any difficult environment. The – Per port PoE function enable/disable IGS-5225-4UP1T2S also allows either DIN rail or wall mounting for efficient use of – PoE admin-mode control cabinet space. – PoE port power feeding priority – Per PoE port power limit – PD classification detection • Intelligent PoE features – Temperature threshold control – PoE usage threshold control – PD alive check – PoE schedule Industrial Case and Installation • IP30 aluminum case • DIN-rail or wall-mount design • 48~56V DC, redundant power with polarity reverse protect function • Supports 6000V DC Ethernet ESD protection • -40 to 75 degrees C operating temperature Digital Input and Digital Output • 2 Digital Input (DI) • 2 Digital Output (DO) • Integrate sensors into auto alarm system • Transfer alarm to IP network via email and SNMP trap 1

IGS-5225-4UP1T2S 802.3bt Ready -- 60 Watts of Power over 4-pair UTP System Layer 2 Features The IGS-5225-4UP1T2S Ultra PoE solution adopts the IEEE 802.3at/af PoE • Prevents packet loss with back pressure (half-duplex) and standard. Instead of delivering power over 2-pair twisted UTP – be it end-span IEEE 802.3x pause frame flow control (full-duplex) (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability • High performance of Store-and-Forward architecture, and to source up to 60 watts of power by using all the four pairs of standard Cat5e/6 runt/CRC filtering eliminates erroneous packets to optimize Ethernet cabling. In the new 4-pair system, the IGS-5225-4UP1T2S is able to the network bandwidth deliver per port up to 60 watts of power to each remote PoE compliant powered • Storm Control support device (PD). It possesses double amount of power capability than the conventional – Broadcast/Multicast/Unicast 802.3at PoE and is an ideal solution to satisfying the growing demand for higher • Supports VLAN power consuming network PDs, such as: – IEEE 802.1Q tagged VLAN ■ PoE PTZ speed dome – Up to 255 VLANs groups, out of 4095 VLAN IDs ■ Any network device that needs higher PoE power to work normally – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) ■ Thin-client – Private VLAN Edge (PVE) ■ AIO (all-in-one) touch PC, point of sale (POS) and information kiosks – Protocol-based VLAN ■ Remote digital signage display – MAC-based VLAN – Thin Client Voice VLAN • Supports Spanning Tree Protocol Speed Dome 60W – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN Ultra PoE – BPDU Guard 802.3at • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) 30W 60W – Cisco ether-channel (static trunk) IGS-5225-4UP1T2S – Maximum 3 trunk groups with 3 ports per trunk group – Up to 6Gbps bandwidth (duplex mode) • Provides port mirror (1-to-1) • Port mirroring to monitor the incoming or outgoing traffic on Advanced PoE Power Output Mode Management a particular port To meet the demand of various powered devices consuming stable PoE power, the • Loop protection to avoid broadcast loops IGS-5225-4UP1T2S provides three different PoE power output modes for selection. • Supports ERPS (Ethernet Ring Protection Switching) ■ 72W UPOE PoE Power Output Mode (Pins 1, 2, 3, 6 + Pins 4, 5, 7, 8) ■ 30W End-span PoE Power Output Mode (Pins 1, 2, 3, 6) ■ 30W Mid-span PoE Power Output Mode Layer 3 IP Routing Features (Pins 4, 5, 7, 8) • Supports maximum 32 software static routes and route summarization Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with Video IP Surveillances. From the Quality of Service IGS-5225-4UP1T2S GUI, clients just need one click to search and show all of • Ingress Shaper and Egress Rate Limit per port bandwidth the ONVIF devices via network application. In addition, clients can upload floor control images into switch and allows for deploying location of surveillance devices for • 8 priority queues on all switch ports easier inspection and planning. Moreover, clients can get real-time surveillance’s • Traffic classification information and online/offline status, and also allows PoE reboot control from GUI. – IEEE 802.1p CoS – IP TOS/DSCP/IP precedence Intelligent Alive Check for Powered Device – IP TCP/UDP port number The IGS-5225-4UP1T2S PoE Switch can be configured to monitor connected PD’s – Typical network application status in real time via ping action. Once the PD stops working and responding, • Strict priority and Weighted Round Robin (WRR) CoS policies the IGS-5225-4UP1T2S will recycle the PoE port power and bring the PD back to • Supports QoS and In/Out bandwidth control on each port work. It also greatly enhances the reliability in that the PoE port will reset the PD • Traffic-policing policies on the switch port power, thus reducing administrator’s management burden. • DSCP remarking 2

IGS-5225-4UP1T2S Step 1 Step 2 Multicast • Supports IGMP snooping v1, v2 and v3 PT PoE Camera No Response......PD Status Good!! • Supports MLD snooping v1 and v2 Ping Request • Querier mode support Ping Request • IGMP snooping port filtering Ping Echo Check alive status for 3 times • MLD snooping port filtering Step 3 Step 4 • MVR (Multicast VLAN Registration) Alarm Notification PoE PD Alive!! PoE Security ON OFF ON ON • IEEE 802.1X Port-based/MAC-based network access Restart PoE device if without response authentication • Built-in RADIUS client to cooperate with the RADIUS servers PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental • TACACS+ login users access authentication protection on the Earth, the IGS-5225-4UP1T2S can effectively control the power • RADIUS/TACACS+ users access authentication supply besides its capability of giving high watts power. The built-in “PoE schedule” • IP-based Access Control List (ACL) function helps you to enable or disable PoE power feeding for each PoE port • MAC-based Access Control List during specified time intervals and it is a powerful function to help SMBs or • Source MAC/IP address binding enterprises save power and money. • DHCP snooping to filter distrusted DHCP messages • Dynamic ARP Inspection discards ARP packets with Scheduled Power Recycling invalid MAC address to IP address binding The IGS-5225-4UP1T2S allows each of the connected PoE IP cameras or PoE • IP Source Guard prevents IP spoofing attacks wireless access points to reboot at a specific time each week. Therefore, it will • IP address access management to prevent unauthorized reduce the chance of IP camera or AP crash resulting from buffer overflow. intruder Management 8 AM 5 PM 5 PM 8 AM • Switch Management Interfaces – Console/Telnet Command Line Interface – Web switch management – SNMP v1 and v2c switch management – SSH/SSL and SNMP v3 secure access PoE PoE PoE PoE PoE PoE PoE PoE • Four RMON groups (history, statistics, alarms, and events) Power Power Power Power Power Power Power Power On On On On Off Off Off On • IPv6 IP address/NTP/DNS management 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts • Built-in Trivial File Transfer Protocol (TFTP) client Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours Total Saved = 10800watts/month • BOOTP and DHCP for IP address assignment PoE 1000BASE-T UTP with PoE • Firmware upload/download via HTTP/TFTP • DHCP Relay Automatically Reboot • DHCP Option 82 S M T W T F S Every Friday 23:00 • User Privilege levels control • Network Time Protocol (NTP) CPU/Buffer Load 85% • Link Layer Discovery Protocol (LLDP) • SFP-DDM (Digital Diagnostic Monitor) • Cable diagnostic technology provides the mechanism to PoE CPU/Buffer Load 10% detect and report potential cabling issues • Reset button for system reboot or reset to factory default ON OFF ON PoE PT Camera • PLANET Smart Discovery Utility for deployment management 3

IGS-5225-4UP1T2S Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-4UP1T2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 10ms. ERPS Ring for Video Transmission Redundancy Outdoor PoE IP Camera Outdoor PoE PoE PoE IP Camera PoE 1000 PoE IGS-5225-4UP1T2S 1000 Traffic Control Center IGS-5225-4UP1T2S Outdoor PoE IP Camera PoE PoE Recovery time < 10 ms 1000 Network Video IGS-5225-4UP1T2S Recorder 1000 1000BASE-SX/LX Fiber-optic PoE 1000BASE-T UTP with PoE 1000BASE-T UTP SMTP/SNMP Trap Event Alert The IGS-5225-4UP1T2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. SMTP/SNMP Trap Event Alert IGS-5225-4UP1T2S E-mail Alert Malfunction PoE PoE PoE IP Camera PoE IP Camera 4

IGS-5225-4UP1T2S Effective Alarm Alert for Better Protection The IGS-5225 series supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Fault Alarm Feature DC/DC Power Fiber/RJ45 Connection Failure Link Down or SNMP TRAP Mail System Log Digital Input and Digital Output for External Alarm The IGS-5225-4UP1T2S supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-5225-4UP1T2S port shows link down, link up or power failure. Digital Input Security OK!! Alarm Warning Alarm Messaging Uplink I/O /O I/ O I I/O Enclosure Enclosure SNMP Door Detector Door Detector TRAP (Door Closed) (Door Open) Mail System Log Digital Output I/O I/O I/O I/O DC Power Failure Fiber Cable Link Down RJ45 Cable Link Down 5

IGS-5225-4UP1T2S Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225 series not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225 series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225 series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-4UP1T2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 3 trunk groups with 3 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225 Managed Ethernet Switch series is equipped with console, Web and SNMP management interfaces. With the built- in Web-based management interface, the IGS-5225 series offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225 series can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard- based management software by supporting SNMPv3 connection which encrypts the packet content at each session. 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH Powerful Security The IGS-5225 series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Flexibility and Extension Solution The additional two mini-GBIC slots built in the IGS-5225-4UP1T2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single- mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225 series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 6

IGS-5225-4UP1T2S Digital Diagnostic Monitor (DDM) Voltage 6 Ammeter 4 8 30 2 10 20 40 0 12 10 50 V 0 60 mA Temperature 50 25 75 0 100 °C 0 −20 20 0 −20 20 −40 40 −40 40 −60 60 −60 60 dBm dBm Power Transceiver Power Receiver 1588 Time Protocol for Industrial Computing Networks The IGS-5225 series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Base Station 1000 1000 Slave Grand Master Base Station IGS-5225-4UP1T2S Transparent Clock 1000 1000BASE-SX/LX Fiber-optic Base Station Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5225-4UP1T2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 7

IGS-5225-4UP1T2S Applications Industrial Area Department/Workgroup PoE Switch Providing up to 4 Ultra PoE, in-line power interfaces, the IGS-5225-4UP1T2S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 4 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-4UP1T2S makes the installation of IP cameras or wireless AP easier and more efficient. Extending Ethernet Distance Outdoor Outdoor IP Camera IP Camera Ethernet up to PoE PoE Ethernet up to 100 meters 100 meters Network Video Recorder 1000 1000 Fiber Optic Cable Fiber Optic Cable Gigabit Fiber Switch up to 120km up to 120km IGS-5225-4UP1T2S IGS-5225-4UP1T2S 240km 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Gigabit Ultra PoE and PoE+ Network Deployment To control the power system of your networking devices, the IGS-5225-4UP1T2S can directly co-work with network devices such as PoE IP phone to build VoIP network in the office. The Ultra PoE switch can be directly connected to any third-party IEEE 802.3af/802.3at compliant devices installed within 100 meters. Furthermore, the IGS-5225-4UP1T2S can extend much longer distance by using PLANET PoE Extender for powering up the PoE PD which can be installed over more than 100 meters away. Central Management Center N N N N PoE Wireless AP (PD) N PoE PoE N PoE PoE PoE IP Camera IGS-5225-4UP1T2S 802.3at PoE High IGS-5225-4UP1T2S IGS-5225-4UP1T2S 802.3at PoE High1000 Power Wireless AP Power Wireless AP N N N PoE 1000 1000 PoE N Core Switch 60-watt Ultra 60-watt Ultra PoE IP Camera PoE PoE PoE IP Camera N N Airport Train Station 100BASE-TX UTP 1000 1000BASE-SX/LX Fiber-optic PoE 100BASE-TX UTP w PoE N DC Power Line (DC) 2.4GHz 802.11n 8

IGS-5225-4UP1T2S Specifications Product IGS-5225-4UP1T2S Hardware Specifications Hardware Version 3 Copper Ports 5 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 2 1000BASE-SX/LX/BX SFP interfaces (Port-6 to Port-7) SFP/mini-GBIC Slots Compatible with 100BASE-FX SFP PoE Injector Port 4 ports with Ultra PoE/802.3at/af PoE injector function with Port-1 to Port-4 Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 14Gbps/non-blocking Throughput (packet per second) 10.42Mpps@ 64 bytes packet Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4Mbits IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex Jumbo Frame 9Kbytes < 5 sec: System reboot Reset Button > 5 sec: Factory default ESD Protection 6KV DC Enclosure IP30 aluminum case Installation DIN rail kit and wall-mount kit Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Connector Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC Level 0: -24V~2.1V (±0.1V) 2 Digital Input (DI) Level 1: 2.1V~24V (±0.1V) DI/DO Input load to 24V DC, 10mA max. 2 Digital Output (DO) Open collector to 24V DC, 100mA max. System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) DIDO (Red) Per 10/100/1000T RJ45 Ports: 100 LNK/ACT (Orange) LED Indicator 1000 LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Per PoE Port: Ultra PoE-in-use x 1 (Green) 802.3at/af PoE-in-use x1 (Orange) PoE Usage: 60W, 120W, 180W, 240W (Green) Dimensions (W x D x H) 72 x 107 x 152 mm Weight 1050g Power Requirements Dual 48~56V DC (>52V DC for PoE+ output recommended) Max. 6.6 watts/22.52BTU (Power on without any connection) Power Consumption Max. 282 watts/962.22BTU (Full loading with Ultra PoE function) Power Over Ethernet PoE Standard IEEE 802.3af/802.3at/Ultra PoE PSE PoE Power Supply Type End-span/Mid-span/UPoE IEEE 802.3af Standard - Per port 48V~52V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard PoE Power Output - Per port 52V~56V DC (depending on the power supply), max. 36 watts Ultra PoE - Per port 48V~56V DC (depending on the power supply), max. 72 watts 9

IGS-5225-4UP1T2S End-span: 1/2(-), 3/6(+) Power Pin Assignment Mid-span: 4/5(+), 7/8(-) UPoE: 1/2(-), 3/6(+),4/5(+), 7/8(-) PoE Power Budget 240W maximum (depending on power input) PoE Ability PD @ 15 watts 4 units PoE Ability PD @ 30 watts 4 units PoE Ability PD @ 60 watts 4 units Layer 2 Function Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/both Port Mirroring 1 to 1 monitor 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4095 VLAN IDs IEEE 802.3ad LACP/static trunk Link Aggregation Supports 3 trunk groups with 3 ports per trunk group Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IGMP querier mode support MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 123 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps RFC 1213 MIB-II RFC 2618 RADIUS Client MIB RFC 1493 Bridge MIB RFC 2933 IGMP-STD-MIB RFC 1643 Ethernet MIB RFC 3411 SNMP-Frameworks-MIB SNMP MIBs RFC 2863 Interface MIB IEEE 802.1X PAE RFC 2665 Ether-Like MIB LLDP RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) MAU-MIB RFC 2737 Entity MIB Layer 3 Function IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries IPv4 software static routing Routing Protocols IPv6 software static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) 10

IGS-5225-4UP1T2S IEEE 802.3 10BASE-T IEEE 802.1ab LLDP IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3af Power over Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3at Power over Ethernet Plus IEEE 802.3ab Gigabit 1000T IEEE 802.3bt Power over Ethernet ready IEEE 802.3x flow control and back pressure RFC 768 UDP IEEE 802.3ad port trunk with LACP RFC 793 TFTP Standards Compliance IEEE 802.1D Spanning Tree Protocol RFC 791 IP IEEE 802.1w Rapid Spanning Tree Protocol RFC 792 ICMP IEEE 802.1s Multiple Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1p Class of Service RFC 1112 IGMP v1 IEEE 802.1Q VLAN tagging RFC 2236 IGMP v2 IEEE 802.1X Port Authentication Network Control Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Dimensions Top View DI0 DI1 DO0 DO1 GND GND Mounting Kit + + DC1 Fault DC2 Input DC 48-56V Side View Front View Side View Rear View Console P1 P2 FAULT Ring R.O. I/O 115200,N,8,1 6 7 LNK 1000 100 1000 100 ACT PoE Power Usage 240W 180W 5 120W 60W 1000 LNK/ACT 10/100 LNK/ACT 4 4 3 3 PoE In-use 2 2 DIN-Rail Kit 1 1 60W af/at RESET IGS-5225-4UP1T2S Bottom View Mounting Kit Dimensions ( unit = mm ) 11

IGS-5225-4UP1T2S Ordering Information IGS-5225-4UP1T2S Industrial L2+ 4-Port 10/100/1000T Ultra PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch Related Products L2+ Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch IGS-5225-8T2S2X (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 4-Port 100/1000X SFP + 2-Port 10G SFP+ Managed Ethernet Switch IGS-5225-8P2S2X (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch IGS-12040MT (-40~75 degrees C) L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Ethernet Switch IGS-10020HPT (-40~75 degrees C) IPOE-E174 1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender Available Modules for IGS-5225-4UP1T2S • 1000Mbps SFP transceiver modules MGB-GT SFP-Port 1000BASE-T Module MGB-SX SFP-Port 1000BASE-SX mini-GBIC module - 550m MGB-SX2 SFP-Port 1000BASE-SX mini-GBIC module - 2km MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 10km MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km MGB-TSX SFP-Port 1000BASE-SX mini-GBIC module - 550m (-40 ~ 75 degrees C) MGB-TLX SFP-Port 1000BASE-LX mini-GBIC module - 10km (-40 ~ 75 degrees C) MGB-TL30 SFP-Port 1000BASE-LX mini-GBIC module - 30km (-40 ~ 75 degrees C) MGB-TL70 SFP-Port 1000BASE-LX mini-GBIC module - 70km (-40 ~ 75 degrees C) • 100Mbps SFP transceiver modules MFB-FX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km MFB-F20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km MFB-F40 SFP-Port 100BASE-FX Transceiver (1310nm) - 40km MFB-F60 SFP-Port 100BASE-FX Transceiver (1310nm) - 60km MFB-FA20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) - 20km MFB-FB20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) - 20km MFB-TFX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km (-40 ~ 75 degrees C) MFB-TF20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km (-40 ~ 75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-5225-4UP1T2S 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 12