産業用イーサネットスイッチ PLANET IGS-5225-16T4S

IGS-5225-16T4S Industrial L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Physical Port • 16-port 10/100/1000BASE-T RJ45 copper • 4 100/1000BASE-X mini-GBIC/SFP slots, compatible with 100BASE-FX SFP • RJ45 to RS232 DB9 console interface for basic management and setup Hardware Conformance PLANET IGS-5225-16T4S, a new industrial Layer 2+ managed Gigabit Switch, features • One 100 to 240V AC or dual 36 to 60V DC power input, 16 10/100/1000Mbps ports and 4 100/1000X SFP ports, and supports static Layer 3 redundant power with polarity reverse protection function routing in a 1U case. With a total switch fabric of 40Gbps, the IGS-5225-16T4S can – Active-active redundant power failure protection handle large amounts of data in a secure topology linking to an industrial backbone or – Backup of catastrophic power failure on one supply high capacity servers. The IGS-5225-16T4S is capable of providing non-blocking switch – Fault tolerance and resilience • 19-inch rack-mountable design fabric and wire-speed throughput in the temperature range from -40 to 75 degrees C • IP30 metal case without any packet loss and CRC error. It greatly simplifies the tasks of upgrading the • Supports 6000V DC Ethernet ESD protection industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts • -40 to 75 degrees C operating temperature for DC power input user-friendly “Front Access” design for easy wiring and maintenance of the IGS-5225- • -10 to 60 degrees C operating temperature for AC power input 16T4S when placed in the cabinet. Digital Input & Digital Output AC Power Input and Switch 4 x 100/1000BASE-X SFP Slot • 2 Digital Input (DI) 2 x DI/DO 16 x 10/100/1000BASE-T RJ45 RJ45 Type Console • 2 Digital Output (DO) • Integrates sensors into auto alarm system • Transfers alarm to IP network via email and SNMP trap Layer 3 IP Routing Features • Supports maximum 32 static routes and route summarization Layer 2 Features Grounding 2 x DC Power Input • Prevents packet loss with back pressure (half-duplex) and DC Power Switch IEEE 802.3x pause frame flow control (full-duplex) AC and DC Redundant Power to Ensure Continuous Operation • High performance of Store-and-Forward architecture, and runt/ The IGS-5225-16T4S possesses a 100~240V AC power supply and dual 36~60V DC CRC filtering eliminates erroneous packets to optimize the power supply utilized as redundant power supply to ensure its continuous operation. Its network bandwidth redundant power system is specifically designed to handle the demands of high-tech • Storm control support facilities requiring the highest power integrity. Furthermore, with the 36~60V DC power – Broadcast/Multicast/Unknown unicast supply implemented, the IGS-5225-16T4S can be applied as a telecom level device and • Supports VLAN – placed in almost any difficult environment. IEEE 802.1Q tagged VLAN – Up to 255 VLANs groups, out of 4095 VLAN IDs Digital Input and Digital Output for External Alarm – Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) To help the network administrators efficiently manage unexpected network situations, the – Private VLAN Edge (PVE) – Protocol-based VLAN IGS-5225-16T4S provides Digital Input and Digital Output for external alarm device on – MAC-based VLAN the front panel. The Digital Input can be used to detect and log the status of the external – IP subnet-based VLAN devices such as door intrusion detector. The Digital Output could be used to send alarm – Voice VLAN whenever the IGS-5225-16T4S has port link-down or power failure. 1

IGS-5225-16T4S Digital Input • Supports Spanning Tree Protocol Security OK!! Alarm Warning Alarm Messaging – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard I/O I/O I/O I/O • Supports Link Aggregation Enclosure Enclosure SNMPTRAP Door Detector Door Detector Mail System – Log 802.3ad Link Aggregation Control Protocol (LACP)(Door Closed) (Door Open) – Cisco ether-channel (static trunk) Digital Output – Maximum 10 trunk groups, with 8 ports for each trunk – Up to 16Gbps bandwidth (full duplex mode) • Provides port mirror (many-to-1) I/O I/O I/O I/O • Port mirroring monitors the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops • Supports E.R.P.S. (Ethernet Ring Protection Switching) • IEEE 1588 and Synchronous Ethernet network timing (Port1 ~ 12) Quality of Service RJ45 Cable AC Power DC Power Failure Link Down Fiber Cable Failure Link Down • Ingress shaper and egress rate limit per port bandwidth control Effective Alarm Alert for Better Protection • 8 priority queues on all switch ports The IGS-5225-16T4S supports a Fault Alarm feature which can alert the users when • Traffic classification there is something wrong with the switches. With this ideal feature, the users would not – IEEE 802.1p CoS have to waste time to find where the problem is. It will help to save time and human – ToS/DSCP/IP precedence of IPv4/IPv6 packets – IP TCP/UDP port number resource. – Typical network application • Strict priority and Weighted Round Robin (WRR) CoS policies Fault Alarm Feature • Traffic-policing policies on the switch port • DSCP remarking or Multicast • Supports IGMP snooping v1, v2 and v3 • Supports MLD snooping v1 and v2 SNMP TRAP AC/DC Power SystemRJ45/Fiber Connection Mail • Querier mode supportLog Failure Link Down • IGMP snooping port filtering IPv6/IPv4 Dual Stack • MLD snooping port filtering Supporting both IPv6 and IPv4 protocols, the IGS-5225-16T4S helps data centers, • MVR (Multicast VLAN Registration) campuses, telecoms, and more to experience the IPv6 era with the lowest investment Security as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge • Authentication network is set up. – IEEE 802.1x port-based/MAC-based network access authentication Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management – IEEE 802.1x authentication with guest VLAN The IGS-5225-16T4S offers IPv4/IPv6 VLAN routing feature which allows to crossover – Built-in RADIUS client to cooperate with the RADIUS different VLANs and different IP addresses for the purpose of having a highly- servers secure,flexible management and simpler networking application. – RADIUS/TACACS+ users access authentication • Access Control List Robust Layer 2 Features – IP-based Access Control List (ACL) The Switch can be programmed for advanced switch management functions such – MAC-based Access Control List (ACL) as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning • Source MAC/IP address binding Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD • DHCP Snooping to filter distrusted DHCP messages 2

IGS-5225-16T4S Snooping. Via the link aggregation of supporting ports, the IGS-5225-16T4S allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail- • Dynamic ARP Inspection discards ARP packets with invalid over as well. MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks MSTP LACP • IP address access management to prevent unauthorized Q-in-Q QoS LLDP intruder MLD IGMP Management L2/L4 L2/L4 Managed Switch Managed Switch • IPv4 and IPv6 dual stack management • Switch Management Interfaces – Console/Telnet command line interface – Web switch management Powerful Security – SNMP v1, v2c, and v3 switch management The IGS-5225-16T4S offers a comprehensive layer 2 to layer 4 Access Control List – SSH/SSL secure access (ACL) for enforcing security to the edge. It can be used to restrict network access • IPv6 address/NTP management by denying packets based on source and destination IP address, TCP/UDP ports or • Built-in Trivial File Transfer Protocol (TFTP) client defined typical network applications. Its protection mechanism also comprises 802.1X • BOOTP and DHCP for IP address assignment Port-based and MAC-based user, and device authentication. With the private VLAN • System Maintenance function, communication between edge ports can be prevented to ensure user privacy. – Firmware upload/download via HTTP/TFTP The IGS-5225-16T4S also provides DHCP Snooping, IP Source Guard and Dynamic – Reset button for system reboot or reset to factory default ARP Inspection functions to prevent IP snooping from attack and discard ARP packets – Dual images • DHCP relay and option 82 with invalid MAC address. The network administrators can now construct highly-secure • User privilege levels control corporate networks with considerably less time and effort than before. • NTP (Network Time Protocol) Excellent Traffic Control • Link Layer Discovery Protocol (LLDP) and LLDP-MED The IGS-5225-16T4S is loaded with powerful traffic management and QoS features to • Network diagnostic enhance connection services by telecoms and ISPs. The QoS features include wire- – SFP-DDM (Digital Diagnostic Monitor) – Cable diagnostic technology provides the mechanism to speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi- detect and report potential cabling issues tenant units, multi-business units, Telco and network service providers’ applications. It – ICMPv6/ICMPv4 remote ping also empowers the industrial environment to take full advantage of the limited network • SMTP/Syslog remote alarm resources and guarantees the best performance in VoIP and video conferencing • Four RMON groups (history, statistics, alarms and events) transmission. • SNMP trap for interface link up and link down notification • System Log Efficient and Secure Management • PLANET Smart Discovery Utility for deployment With built-in Web-based management interface, the IGS-5225-16T4S L2+ Managed management Switch offers an easy-to-use, platform-independent management and configuration facility which includes Console, Web and SNMP management interfaces. The SNMP can be managed via any management software based on the standard of SNMP Protocol. For reducing product learning time, it offers Cisco-like command via Telnet or console port and customer does not need to learn new console command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. IGS-5225-16T4S 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH 3

IGS-5225-16T4S Flexibility and Extension Solution The four mini-GBIC slots built in the IGS-5225-16T4S support dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules. Now the administrator can flexibly choose the suitable SFP transceiver according to not only the transmission distance, but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) or up to 10/20/30/40/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the industrial data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-5225-16T4S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 6 4 8 2 10 Ammeter 0 12 30 V 20 40 10 50 0 60 mA Temperature 50 25 75 0 100 °C 0 −20 20 −40 40 −60 60 0 −20 20 dBm −40 40 −60 60 dBm Power Transmit Power Receiver 4

IGS-5225-16T4S Applications Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5225-16T4S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain, simple Ring network, the recovery time of data link can be as fast as 20ms. Office Factory 1000 Industrial MAN Switch IGS-5225-16T4S 1000 E.R.P.S. Ring for Metropolitan Area Network Application Recovery Time < 50ms 1000 PoE PoE 1000 8-Port MAN Switch 1000 Industrial PoE Switch Highway Control CenterIndustrial PoE Switch Layer 3 VLAN Routing Application With the built-in, robust Layer 3 routing protocols, the IGS-5225-16T4S ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 32 routing entries. The IGS-5225-16T4S, certainly an ideal solution for industries, offers greater security, control and bandwidth conservation, and high-speed uplink. VLAN Routing Applications 17Fl.: Fi V naL nA ceN 1 D0 e0 p aD rto mm en 20a ti n Fl.: S B a 1 le92. 10001 450m VL sA DN e6 p8 a. 300 r1 tm0. ex Do n/24 m t ain 550m 1000 A 192.168.30.x/24 1000 NAS C S 200mo Se ton rtr ro v a l e C r g R e V oL en cA kN te1 r Domain 192 4.1 F68. IGS-5225-16T4S l.: M 0 V K.x TL A DN ep2 a0 r0 tm D eo ntmain C 192.1 10km 68.20 1000 1000BASE-SX/LX Fiber-optic .x1000 /24 Branch Office 5

IGS-5225-16T4S Specifications Product IGS-5225-16T4S Hardware Specifications Copper Ports 16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports SFP/mini-GBIC Slots 4 100/1000BASE-X SFP interfaces Compatible with 100BASE-FX SFP transceiver Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 40Gbps/non-blocking Throughput 29.76Mpps@64Bytes Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4M bits Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex Jumbo Frame 9K bytes Reset Button < 5 sec: System reboot> 5 sec: Factory default Dimensions (W x D x H) 440 x 200 x 44.5 mm, 1U height Weight 2672g System: AC (Green), DC1 (Green), DC2 (Green), Fault (Red) Ring (Green), R.O. (Green), DI/DO (Red) 10/100/1000T RJ45 Interfaces (Port 1 to Port 16): LED 1000Mbps LNK/ACT (Green) 10/100Mbps LNK/ACT (Orange) 100/1000Mbps SFP Interfaces (Port 17 to Port 20): 1000Mbps LNK/ACT (Green) 100Mbps LNK/ACT (Orange) Power Consumption Max. 15.2 watts/51.8 BTU Power Requirements – AC AC 100~240V, 50/60Hz 0.4A Power Requirements – DC DC 36~60V, 0.6A 2 Digital Input (DI): Level 0: -24~2.1V DI/DO Level 1: 2.1~24V Max. input current: 10mA 2 Digital Output (DO): Open collector to 24VDC, 100mA ESD Protection 6KV DC Layer 2 Management Functions Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status Port Mirroring TX/RX/BothMany-to-1 monitor 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN IP subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs Link Aggregation IEEE 802.3ad LACP/static trunk10 groups with 8 port per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Traffic classification based, strict priority and WRR 8-level priority for switching: QoS - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP/ToS field in IP packet IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groupsIGMP querier mode support 6

IGS-5225-16T4S MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groupsMLD querier mode support Access Control List IP-based ACL/MAC-based ACLUp to 256 entries Per port bandwidth control Bandwidth Control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps Layer 3 Functions IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries Routing Protocols IPv4 software static routingIPv6 software static routing Management Basic Management Interfaces Console/Telnet/Web browser/SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 RFC 1213 MIB-II RFC 2618 RADIUS Client MIB RFC 1493 Bridge MIB RFC 2863 IF-MIB RFC 1643 Ethernet MIB RFC 2933 IGMP-STD-MIB SNMP MIBs RFC 2863 Interface MIB RFC 3411 SNMP-Frameworks-MIB RFC 2665 Ether-Like MIB RFC 4292 IP Forward MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 4293 IP MIB RFC 2737 Entity MIB RFC 4836 MAU-MIBIEEE 802.1X PAE LLDP Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEEE 802.1Q VLAN tagging IEEE 802.3 10BASE-T IEEE 802.1x Port Authentication Network Control IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.1ab LLDP IEEE 802.3z Gigabit SX/LX IEEE 1588v2 IEEE 802.3ab Gigabit 1000T RFC 768 UDP IEEE 802.3x flow control and back pressure RFC 793 TFTP IEEE 802.3ad port trunk with LACP RFC 791 IP IEEE 802.1D Spanning Tree Protocol RFC 792 ICMP IEEE 802.1w Rapid Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1s Multiple Spanning Tree Protocol RFC 1112 IGMP v1 IEEE 802.1p Class of Service RFC 2236 IGMP v2RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 Standards Conformance Temperature: -10 ~ 60 degrees C for AC power input Operating Temperature: -40 ~ 75 degrees C for DC power input Relative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -40 ~ 80 degrees CRelative Humidity: 5 ~ 95% (non-condensing) 7

IGS-5225-16T4S Drawing Ordering Information IGS-5225-16T4S Industrial L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Related Products IGS-5225-20T4C2X Industrial L2+ 20-Port 10/100/1000T + 4-Port TP/SFP Combo + 2-Port 10G SFP+ Managed Ethernet Switch (-40~75 degrees C) XGSW-28040 24-Port 10/100/1000Mbps + 4-Port Shared SFP + 4-Port 10G SFP+ Managed Switch XGSW-28040HP L2+ 24-Port 10/100/1000Mbps 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Hardware Layer3 IPv4/IPv6 Static Routing MGSW-28240F 24-Port 100/1000BASE-X SFP + 4-Port 10G SFP+ L2/L4 Managed Metro Ethernet Switch IGSW-24040T Industrial L2+ 20-Port 10/100/1000T + 4-Port TP/SFP Combo Managed Ethernet Switch (-40~75 degrees C) 8

IGS-5225-16T4S Available Modules for IGS-5225-16T4S Gigabit Ethernet Transceiver (1000BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MGB-GT 1000 Copper -- 100m -- 0 ~ 60 degrees C MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60 degrees C MGB-SX2 1000 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MGB-LX 1000 LC Single Mode 10km 1310nm 0 ~ 60 degrees C MGB-L30 1000 LC Single Mode 30km 1310nm 0 ~ 60 degrees C MGB-L50 1000 LC Single Mode 50km 1550nm 0 ~ 60 degrees C MGB-L70 1000 LC Single Mode 70km 1550nm 0 ~ 60 degrees C MGB-L120 1000 LC Single Mode 120km 1550nm 0 ~ 60 degrees C MGB-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75 degrees C MGB-TLX 1000 LC Single Mode 10km 1310nm -40 ~ 75 degrees C MGB-TL30 1000 LC Single Mode 30km 1310nm -40 ~ 75 degrees C MGB-TL70 1000 LC Single Mode 70km 1550nm -40 ~ 75 degrees C Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MGB-LA10 1310nm 1550nm MGB-LB10 1000 WDM(LC) Single Mode 10km 0 ~ 60 degrees C1550nm 1310nm MGB-LA20 1310nm 1550nm MGB-LB20 1000 WDM(LC) Single Mode 20km 0 ~ 60 degrees C1550nm 1310nm MGB-LA40 1310nm 1550nm MGB-LB40 1000 WDM(LC) Single Mode 40km 0 ~ 60 degrees C1550nm 1310nm MGB-LA60 1310nm 1550nm MGB-LB60 1000 WDM(LC) Single Mode 60km 0 ~ 60 degrees C1550nm 1310nm MGB-TLA10 1310nm 1550nm MGB-TLB10 1000 WDM(LC) Single Mode 10km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA20 1310nm 1550nm MGB-TLB20 1000 WDM(LC) Single Mode 20km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA40 1310nm 1550nm MGB-TLB40 1000 WDM(LC) Single Mode 40km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA60 1310nm 1550nm MGB-TLB60 1000 WDM(LC) Single Mode 60km -40 ~ 75 degrees C1550nm 1310nm Fast Ethernet Transceiver (100BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 degrees C MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 degrees C MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 degrees C MFB-F120 100 LC Single Mode 120km 1310nm 0 ~ 60 degrees C MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75 degrees C MFB-TF20 100 LC Single Mode 20km 13100nm -40 ~ 75 degrees C Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MFB-FA20 1310nm 1550nm MFB-FB20 100 WDM(LC) Single Mode 20km 0 ~ 60 degrees C1550nm 1310nm MFB-TFA20 1310nm 1550nm MFB-TFB20 100 WDM(LC) Single Mode 20km -40 ~ 75 degrees C1550nm 1310nm MFB-TFA40 1310nm 1550nm MFB-TFB40 100 WDM(LC) Single Mode 40km -40 ~ 75 degrees C1550nm 1310nm PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IGS-5225-16T4S Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9