産業用イーサネットスイッチ PLANET IGS-500T

IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch Key FeatuPrheysical Port • 5-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X function Layer 2 Features • Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet standard • Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full duplex • Prevents packet loss with back pressure (half-duplex) and Compact Size for More Practicability and Convenience IEEE 802.3x pause frame flow control (full-duplex) PLANET IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch, suitable for industrial use, features 5 1000Mbps auto- • High-performance Store and Forward architecture, negotiation ports, IP30-rated rugged but compact case and a wide-ranging broadcast storm control and runt/CRC filtering eliminate redundant power system (12~48V DC or 24V AC). The IGS-500T is able to erroneous packets to optimize the network bandwidth operate in any harsh environment with operating temperature ranging from -40 • Backplane (switching fabric): 10Gbps to 75 degrees C. • Integrated address look-up engine, supporting 4K absolute MAC addresses • 9K jumbo packet size • Automatic address learning and address aging • CSMA/CD Protocol Industrial Case and Installation • IP30 metal case 135mm • DIN rail and wall-mount design • 12 to 48V DC, redundant power with polarity reverse 104mm protect function and connective, removable terminal block for master and slave power; 24V AC power support • Supports 6000 VDC Ethernet ESD protection • -40 to 75 degrees C operating temperature • Free fall, shock-proof and vibration-proof for industries IGS-500T IGS-501T Compact Industrial 5-Port Switch Data Sheet 1 1

IGS-500T As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually in demand, the IGS-500T is especially designed to make the deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and power transmission. Low Power Consumption for Green Networking The IGS-500T, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power saving methods. These features make the IGS-500T consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently. With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the IGS-500T can automatically detect cable link status and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active. Dual Power Input for High Availability Network System The IGS-500T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the IGS-500T via power supply 2 alternatively without any loss of operation. Non-stop Ethernet Server Dual Power Input with Auto Failover 12V~48V DC 12V~48V DC 12V~48V DC 12V~48V DC DC DC DC DC Active Active Active Power Power Power Power 1 2 1 2 Camera Camera PC PC DC Power Line (DC) 1000BASE-T UTP High Switch Performance The IGS-500T offers a high-performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 10Gbps and the 4K MAC address table, the IGS-500T can perform wire-speed packet transfer without the risk of packet loss. The flow control function enables the IGS-500T to provide fast and reliable data transfer. Plug and Play All of the RJ45 copper interfaces in the IGS-500T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight- through or crossover cables. 2

IGS-500T Application Designed for Heavy Industries The IGS-500T’s IP30-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data. IP Camera Internet Printer IGS-500T |O|O| Industrial Controller Serial over Ethernet 1000BASE-T UTP Converter PC |O|O| Serial Line (RS-XXX) 3

IGS-500T Specifications Model IGS-500T Hardware Specifications Hardware Version 4 Copper Ports 5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation Removable 6-pin terminal block Connector Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Provides one relay output for power failure Alarm Alarm relay current carry ability: 1A@DC 24V 3 x LED for system and power: ■ Green: DC Power 1 ■ Green: DC Power 2 LED ■ Red: Power Fault 2 x LED for each copper port ■ Green: 1000Mbps LNK/ACT ■ Orange:10/100Mbps LNK/ACT ESD Protection 6KV EFT Protection 6KV Power Requirements 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support Power Consumption / Dissipation 3.6 watts/12.35BTU Installation DIN-rail kit and wall-mount ear Enclosure IP30 metal case Dimensions (W x D x H) 70 x 104 x 30 mm Weight 252g Switch Specifications Switch Processing Scheme Store-and-Forward Address Table 4K entries Buffer Memory 1M bits on-chip buffer memory Back pressure for half duplex Flow Control IEEE 802.3x pause frame for full duplex Switch Fabric 10Gbps Throughput (packet per second) 7.4Mpps@64bytes Jumbo Frame 9K 10/100/1000BASE-T Network Cables Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters) EIA/TIA-568 100-ohm STP (max. 100 meters) Standards Conformance IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet Standards Compliance IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet IEEE 802.1p Class of Service Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) Environment Operating: -40~75 degrees C Temperature Storage: -40~75 degrees C Humidity Operating: 5~90%, Storage: 5~90% (non-condensing) 4

IGS-500T Diagram Top View Side View Front View Side View Rear View P1 P2 FAULT LNK ACT 1000 1 2 3 4 5 100 LNK ACT IGS-500T Bottom View Dimensions ( unit = mm ) Ordering Information IGS-501T 5-port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature) Related Products IGS-501T 5-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature) IGS-801T 8-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature) IGS-1020TF Industrial 8-Port 10/100/1000T + 2-Port 1000X SFP Ethernet Switch (-40~75 degrees C operating temperature) ISW-800T Compact Industrial 8-Port 10/100TX Ethernet Switch (-40~75 degrees C operating temperature) ISW-501T Industrial 5-Port 10/100TX Fast Ethernet Switch (-40~75 degrees C operating temperature) ISW-801T Industrial 8-Port 10/100TX Fast Ethernet Switch (-40~75 degrees C operating temperature) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-500T 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 5 91.00 9.00 18.00 52.00 52.00 21.69 28.65 70.00 104.00 30.00 V1+ V1- 1A@24V V2+ V2- Input DC1 Fault DC2 DC12~48V, AC 24V 30.00 50.00