産業用PoEスイッチ PLANET WGS-5225-8P2S

WGS-5225-8P2S Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch Physical Port • 8 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector • 2 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus/end- span PSE • Up to 8 IEEE 802.3af/802.3at devices powered • Supports PoE power up to 36 watts for each PoE port Wall-mount PoE Managed Switch with Advanced L2+/L4 Switching and • Auto detects powered device (PD) Security PLANET WGS-5225-8P2S is an Industrial Wall-mount PoE Managed Switch • Circuit protection prevents power interference between featuring PLANET intelligent PoE functions to improve the availability of industrial ports applications. It provides IPv6/IPv4 dual stack management and built-in L2+/L4 • Remote power feeding up to 100m Gigabit switching engine along with eight 10/100/1000BASE-T ports featuring 36- • PoE management features watt PoE and two additional 1000BASE-X SFP ports. With a total power budget – Total PoE power budget control of up to 240 watts for different kinds of PoE applications, and featuring networking – Per port PoE function enable/disable speed and operating temperature ranging from -40 to 75 degrees C in a compact – PoE admin-mode control but rugged IP30 metal housing, the WGS-5225-8P2S is an ideal solution to meet – PoE port power feeding priority the demand for the following network applications: – Per PoE port power limit ■ Building/Home automation network – PD classification detection ■ Internet of things (IoT) • Intelligent PoE features ■ IP surveillance – Temperature threshold control – PoE usage threshold control – PD alive check – PoE schedule Industrial Case and Installation • Compact size with fixed wall-mounted, magnetic wall- mounted or DIN-rail design • IP30 metal case • Supports -40 to 75 degrees C operating temperature Redundant Ring, Fast Recovery for Critical Network Applications • Supports ESD 6KV DC Ethernet protection The WGS-5225-8P2S supports redundant ring technology and features strong, • Dual power input design rapid self-recovery capability to prevent interruptions and external intrusions. – 48V~56V DC wide power input with polarity reverse It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection protect function Switching) technology, Spanning Tree Protocol (802.1s MSTP), and dual power – 3-pin terminal block or DC jack connector input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple ring Layer 2 Features network, the recovery time of data link can be as fast as 10ms. • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth 1

WGS-5225-8P2S Office Factory • Storm Control support – Broadcast/Multicast/Unicast 1000 • Supports VLAN Industrial MAN Switch Industrial MAN Switch – IEEE 802.1Q tagged VLAN 1000 – Up to 255 VLANs groups, out of 4094 VLAN IDs ERPS Ring for Metropolitan Area Network Application – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Recovery Time < 10ms – Private VLAN Edge (PVE) 1000 – Protocol-based VLAN – MAC-based VLAN PoE PoE PoE PoE – Voice VLAN • Supports Spanning Tree Protocol 1000 8-Port MAN Switch 1000 Industrial – IEEE 802.1D Spanning Tree Protocol (STP) PoE Switch Industrial Highway PoE Switch Control Center – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is spanning tree by VLAN specifically designed for co-operating with video IP surveillances. From the WGS- – BPDU Guard 5225-8P2S’s GUI, you just need one click to search and show all of the ONVIF • Supports Link Aggregation devices via network application. In addition, you can upload floor images to the – 802.3ad Link Aggregation Control Protocol (LACP) switch and can remotely monitor or inspect an assembly line. Moreover, you can – Cisco ether-channel (static trunk) get real-time surveillance information and online/offline status; the PoE reboot can – Maximum 2 trunk groups with 2 ports per trunk group be controlled from the GUI. – Up to 2Gbps bandwidth (duplex mode) • Provides port mirror (1-to-1) • Port mirroring to monitor the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops • Supports ERPS (Ethernet Ring Protection Switching) Layer 3 IP Routing Features • Supports maximum 32 static routes and route summarization Quality of Service • Ingress Shaper and Egress Rate Limit per port bandwidth control • 8 priority queues on all switch ports • Traffic classification – IEEE 802.1p CoS – IP TOS/DSCP/IP precedence – IP TCP/UDP port number – Typical network application • Strict priority and Weighted Round Robin (WRR) CoS Built-in Unique PoE Functions for Powered Devices Management policies As it is the managed PoE switch for surveillance, wireless and VoIP networks, the • Supports QoS and In/Out bandwidth control on each port WGS-5225-8P2S features the following special PoE management functions: • Traffic-policing on the switch port ■ PD alive check • DSCP remarking ■ Scheduled power recycling ■ PoE schedule ■ PoE usage monitoring 2

WGS-5225-8P2S Intelligent Powered Device Alive Check Multicast The WGS-5225-8P2S can be configured to monitor connected PD status in real • Supports IGMP snooping v1, v2 and v3 time via ping action. Once the PD stops working and responding, the WGS-5225- • Supports MLD snooping v1 and v2 8P2S will resume the PoE port power and bring the PD back to work. It will greatly • Querier mode support enhance the network reliability through the PoE port resetting the PD’s power • IGMP snooping port filtering source and reducing administrator management burden. • MLD snooping port filtering Step 1 Step 2 • MVR (Multicast VLAN Registration) PT PoE Camera No Response......PD Status Good!! Security Ping Request • IEEE 802.1x Port-based/MAC-based network access Ping Request authentication Ping Echo Check alive status for 3 times • Built-in RADIUS client to cooperate with the RADIUS Step 3 Step 4 servers Alarm Notification PoE PD Alive!! • TACACS+ login users access authentication PoE • RADIUS/TACACS+ users access authentication ON OFF ON ON • IP-based Access Control List (ACL) Restart PoE device if without response • MAC-based Access Control List • Source MAC/IP address binding Scheduled Power Recycling The WGS-5225-8P2S allows each of the connected PoE IP cameras or PoE • DHCP snooping to filter distrusted DHCP messages wireless access points to reboot at a specific time each week. Therefore, it will • Dynamic ARP Inspection discards ARP packets with invalid reduce the chance of IP camera or AP crash resulting from buffer overflow. MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks Automatically Reboot • IP address access management to prevent unauthorized S M T W T F S Every Friday 23:00 intruder CPU/Buffer Load 85% Management • Switch Management Interfaces PoE CPU/Buffer – Telnet Command Line Interface Load 10% – Web switch management ON OFF ON – SNMP v1 and v2c switch managementPoE PT Camera – SSH/SSL and SNMP v3 secure access PoE Schedule for Energy Saving • Four RMON groups (history, statistics, alarms, and events) Under the trend of energy saving worldwide and contributing to environmental • IPv6 IP address/NTP/DNS management protection, the WGS-5225-8P2S can effectively control the power supply besides • Built-in Trivial File Transfer Protocol (TFTP) client its capability of giving high watts power. The “PoE schedule” function helps you • BOOTP and DHCP for IP address assignment to enable or disable PoE power feeding for each PoE port during specified time • Firmware upload/download via HTTP/TFTP intervals and it is a powerful function to help SMBs or enterprises save power and • DHCP Relay and DHCP Option 82 budget. It also increases security by powering off PDs that should not be in use • User Privilege levels control during non-business hours. • Network Time Protocol (NTP) • Link Layer Discovery Protocol (LLDP) 8 AM 5 PM 5 PM 8 AM • SFP-DDM (Digital Diagnostic Monitor) • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues • Reset button for system reboot or reset to factory default PoE PoE PoE PoE PoE PoE PoE PoE • PLANET Smart Discovery Utility for deployment management Power Power Power Power Power Power Power Power On On On On Off Off Off On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours Total Saved = 10800watts/month PoE 1000BASE-TX UTP with PoE 3

WGS-5225-8P2S Innovative Wall-mount Installation The WGS-5225-8P2S is specially designed to be installed in a narrow environment, such as wall enclosure or electric weak box. The compact, flat and wall- mounted design fits easily in any space-limited location. It adopts the user-friendly “Front Access” design, making the installing, cable wiring, LED monitoring and maintenance of the WGS-5225-8P2S placed in an enclosure very convenient for technicians. The WGS-5225-8P2S can be installed by fixed wall mounting, magnetic wall mounting or DIN rail, thereby making its usability more flexible. SMTP/SNMP Trap Event Alert The WGS-5225-8P2S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. SMTP/SNMP Trap Event Alert WGS-5225-8P2S E-mail Alert Malfunction PoE PoE PoE IP Camera PoE IP Camera Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the WGS-5225-8P2S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application. Robust Layer 2 Features The WGS-5225-8P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The WGS-5225-8P2S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the WGS-5225-8P2S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 2 trunk groups with 2 ports per trunk group, and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Efficient Management For efficient management, the WGS-5225-8P2S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the WGS-5225-8P2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the WGS-5225-8P2S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard- based management software by supporting SNMPv3 connection which encrypts the packet content at each session. 4

WGS-5225-8P2S 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH Powerful Security The WGS-5225-8P2S offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP Provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the WGS-5225-8P2S can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. Flexibility and Extension Solution The additional two mini-GBIC slots built in the WGS-5225-8P2S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single- mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The WGS-5225-8P2S supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 6 4 Ammeter8 2 10 30 20 40 0 12 V 10 50 0 60 mA Temperature 50 25 75 0 100 °C 0 −20 20 −40 40 0 −20 20 −60 60 −40 40 dBm −60 60 dBm Power Transceiver Power Receiver 1588 Time Protocol for Industrial Computing Networks The WGS-5225-8P2S is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. 5

WGS-5225-8P2S Applications Security Building Automation Switch Suitable for buildings where security is strictly to be enforced, the WGS-5225-8P2S offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-5225-8P2S, a tightly-controlled network can be easily had in no time. PoE Wireless AP PoE IP Camera PoE VoIP Gigabit Ethernet Switch PoE PoE PoE Internet 1000 Core WGS-5225-8P2S Fiber Switch PoE PoE PoE 1000BASE-T UTP with PoE |O|O| 1000BASE-T UTP 100BASE-TX UTP 1000 1000BASE-SX/LX Fiber-optic |O|O| Serial Line (RS-XXX) Security Serial Server PoE Access PoE IP Camera Gate Wireless AP Control Different Networks Managed by One Control Center Providing up to 8 PoE+, in-line power interfaces, the WGS-5225-8P2S can centrally manage power supplying to an industrial network system where IP phones, IP cameras, wireless APs and more are built. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the WGS-5225-8P2S makes the installation of IP cameras and wireless APs easier and more efficient. Extending Ethernet Distance Outdoor Outdoor IP Camera IP Camera Ethernet up to PoE PoE Ethernet up to 100 meters 100 meters Network Video Recorder 1000 1000 Fiber Optic Cable Fiber Optic Cable Gigabit Fiber Switch up to 120km up to 120km WGS-5225-8P2S WGS-5225-8P2S 240km 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP PoE 1000BASE-T UTP with PoE 6

WGS-5225-8P2S Specifications Product WGS-5225-8P2S Hardware Specifications Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 to Port-10) SFP+ Slots Compatible with 100BASE-FX SFP PoE Injector Port 8 ports with 802.3at/af PoE injector function with Port-1 to Port-8 Switch Architecture Store-and-Forward Switch Fabric 20Gbps/non-blocking Throughput (packet per second) 14.88Mpps@ 64 bytes packet Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4Mbits IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex Jumbo Frame 9Kbytes < 5 sec: System reboot Reset Button > 5 sec: Factory default ESD Protection 6KV DC Enclosure IP30 metal case Installation DIN rail kit and wall-mount Removable 3-pin terminal block for power input - Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-) Connector - Pin 3 for earth ground DC power jack with 2.0mm central pole System: PWR(Green) Ring (Green) Ring Owner (Green) Per 10/100/1000T RJ45 PoE+ Ports: LED Indicator PoE-in-Use (Orange) LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Dimensions (W x D x H) 180 x 24.4 x 140 mm Weight 686g Power Requirements Dual 48~56V DC (>51V DC for PoE+ output recommended) Max. 6.6 watts/22.6BTU (Power on without any connection) Power Consumption Max. 250.4 watts/859.1BTU (Full loading with PoE function) Power Over Ethernet PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 240W maximum (depending on power input) Max. Number of Class 2 PDs 8 Max. Number of Class 3 PDs 8 Max. Number of Class 4 PDs 8 Layer 2 Function Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Port Configuration Flow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/both Port Mirroring 1 to 1 monitor 7

WGS-5225-8P2S 802.1Q tag based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs IEEE 802.3ad LACP/static trunk Link Aggregation Supports 2 trunk groups with 2 ports per trunk group Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IGMP querier mode support MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 256 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps RFC 1213 MIB-II IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) SNMP MIBs RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Layer 3 Function IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries IPv4 software static routing Routing Protocols IPv6 software static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.1ab LLDP IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3af Power over Ethernet IEEE 802.3z Gigabit SX/LX IEEE 802.3at Power over Ethernet Plus IEEE 802.3ab Gigabit 1000T ITU-T G.8032 Ethernet Ring Protection Switching IEEE 802.3x flow control and back pressure RFC 768 UDP IEEE 802.3ad port trunk with LACP RFC 793 TFTP Standards Compliance IEEE 802.1D Spanning Tree Protocol RFC 791 IP IEEE 802.1w Rapid Spanning Tree Protocol RFC 792 ICMP IEEE 802.1s Multiple Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1p Class of Service RFC 1112 IGMP v1 IEEE 802.1Q VLAN tagging RFC 2236 IGMP v2 IEEE 802.1X Port Authentication Network Control 8

WGS-5225-8P2S Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Drawing Ground Ring PWR V+ R.O. SYS 9 SFP PoE+ Fiber Managed Magnet Mounting 10 1000 LNK ACT WGS-5225-8P2S 100 LNK ACT DC Input Range 48-56V 2 4 6 8 LNK/ACT SFP PoE In-use 1 3 5 7 PoE 9 10 Reset 9 10 Dimensions (unit = mm) 9

WGS-5225-8P2S Ordering Information WGS-5225-8P2S Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch Related Products WGS-5225-8T2SV Industrial L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Wall-mount Managed Switch with LCD Touch Screen Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch with LCD Touch WGS-5225-8P2SV Screen PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City WGS-5225-8P2S 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10