産業用PoEスイッチPLANET WGS-4215-8P2S

WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.3at PoE+ 2-Port 100/1000X SFP Wall-mounted Managed Switch Physical Port • 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function • 2 100/1000BASE-X mini-GBIC/SFP slots Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, end- span PSE • Backward compatible with IEEE 802.3af Power over Ethernet • Up to 8 ports of IEEE 802.3af/802.3at devices powered • Supports PoE power up to 36 watts for each PoE port Easily-deployed and Expanded Network • Auto detects powered device (PD) Designed to be installed in a wall enclosure or simply mounted on a wall in any • Circuit protection prevents power interference between ports convenient location, PLANET WGS-4215-8P2S, an innovative, Industrial 8-port • Remote power feeding up to 100 meters 10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch, • PoE management offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, – Total PoE power budget control and user-friendly interface. The WGS-4215-8P2S is able to operate reliably, stably and – Per port PoE function enable/disable quietly in any environment without affecting its performance. With a total power budget – PoE port power feeding priority of up to 200 watts for different kinds of PoE applications and featuring ultra networking – Per PoE port power limitation – PD classification detection speed and operating temperature ranging from -40 to 75 degrees C in a compact but – PD alive check rugged IP30 metal housing, the WGS-4215-8P2S is an ideal solution to meeting the – PoE schedule demand for the following network applications: Industrial Case and Installation • Building/Home automation network • Internet of things (IoT) • Compact size with fixed wall-mounted, magnetic wall-mounted • IP surveillance or DIN-rail design • Wireless LAN • IP30 metal case protection • Supports -40 to 75 degrees C operating temperature • Supports ESD 8KV DC Ethernet protection • Dual power input design 10/100/1000BASE-T 802.3at PoE+ RJ45 Port 3-pin Terminal Block – 48V~56V DC wide power input with polarity reverse protect function – 3-pin terminal block or DC jack connector Ground Ground V - V - 1 2 3 4 PoE Switching V+ V+ PoE In-use LNK ACT PWR Power LED 9 • Hardware based 10/100Mbps, half/full duplex and 1000Mbps SFP DC Input Range 48-56V 10 100/1000X SFP 1000 LNK ACT DC Input Range 100 LNK ACT LNK/ACT Status full duplex mode, flow control and auto-negotiation and auto 48-56V DC Jack Industrial 8-Port 10/100/1000T 802.3at PoE + MDI/MDI-X2-Port 100/1000X SFP Managed Switch WGS-4215-8P2S • Features Store-and-Forward mode with wire-speed filtering PoE In-use LNK ACT and forwarding rates • IEEE 802.3x flow control for full duplex operation and back SFP 9 10 5 6 7 8 PoE pressure for half duplex operation • 8K MAC address table size 100/1000X SFP Slot 10/100/1000BASE-T 802.3at PoE+ RJ45 Port • 10K jumbo frame 1

WGS-4215-8P2S Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the WGS-4215-8P2S features the following special PoE management functions: • Automatic address learning and address aging • PD alive check • Supports CSMA/CD protocol • Scheduled power recycling Layer 2 Features • PoE schedule • PoE usage monitoring • Supports VLAN – IEEE 802.1Q tagged VLAN – Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support Intelligent Powered Device Alive Check – Protocol VLAN The WGS-4215-8P2S can be configured to monitor connected PD (Powered Device) – Voice VLAN status in real time via ping action. Once the PD stops working and responding, the – Private VLAN (Protected port) – Management VLAN WGS-4215-8P2S will resume the PoE port power and bring the PD back to work. It will – GVRP greatly enhance the network reliability through the PoE port resetting the PD’s power • Supports Spanning Tree Protocol source and reducing administrator management burden. – STP (Spanning Tree Protocol) – RSTP (Rapid Spanning Tree Protocol) – MSTP (Multiple Spanning Tree Protocol) Step 1 Step 2 – STP BPDU Guard, BPDU Filtering and BPDU Forwarding PT PoE Camera No Response...... • Supports Link AggregationPD Status Good!! – IEEE 802.3ad Link Aggregation Control Protocol (LACP) Ping Request – Cisco ether-channel (static trunk) Ping Request • Provides port mirror (many-to-1) Ping Echo Check alive status for 3 times • Loop protection to avoid broadcast loops Step 3 Step 4 Quality of Service Alarm Notification PoE PD Alive!! • Ingress/Egress Rate Limit per port bandwidth control PoE • Traffic classification ON OFF ON ON – IEEE 802.1p CoS Restart PoE device if without response – TOS/DSCP/IP precedence of IPv4/IPv6 packets • Strict priority and Weighted Round Robin (WRR) CoS policies Multicast Scheduled Power Recycling The WGS-4215-8P2S allows each of the connected PoE IP cameras or PoE wireless • Supports IPv4 IGMP snooping v2, v3 access points to reboot at a specific time each week. Therefore, it will reduce the • Supports IPv6 MLD snooping v1, v2 • IGMP querier mode support chance of IP camera or AP crash resulting from buffer overflow. • IGMP snooping port filtering • MLD snooping port filtering Security Automatically Reboot S M T W T F S Every Friday 23:00 • Storm Control support – Broadcast/Unknown unicast/Unknown multicast CPU/Buffer • Authentication Load 85% – IEEE 802.1X port-based network access authentication – Built-in RADIUS client to cooperate with the RADIUS PoE CPU/Buffer servers Load 10% – DHCP Option 82 – RADIUS/TACACS+ authentication ON OFF ON PoE PT Camera • Access Control List – IPv4/IPv6 IP-based ACL 2

WGS-4215-8P2S PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, – IPv4/IPv6 IP-based ACE the WGS-4215-8P2S can effectively control the power supply besides its capability of – MAC-based ACL giving high watts power. The “PoE schedule” function helps you to enable or disable – MAC-based ACE PoE power feeding for each PoE port during specified time intervals and it is a powerful • MAC Security function to help SMBs or enterprises save power and budget. It also increases security – Static MAC by powering off PDs that should not be in use during non-business hours. – MAC filtering • Port security for source MAC address entries filtering • DHCP snooping to filter distrusted DHCP messages • Dynamic ARP inspection discards ARP packets with invalid MAC address to IP address binding 8AM 5PM 5PM 8AM • IP source guard prevents IP spoofing attacks PoE PoE PoE PoE PoE PoE PoE PoE • DoS attack prevention • SSH/SSL Management Power Power Power Power Power Power Power Power Off Off Off On On On On On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts • IPv4 and IPv6 dual stack management Save 24 watts/hr during off-business hours Total consumption of 36 watts/hr Total Saved = 10800 Watts/month • Switch Management Interface PoE 1000Base-T UTP with PoE – IPv4/IPv6 Web switch management Innovative Wall-mount Installation – Telnet Command Line Interface The WGS-4215-8P2S is specially designed to be installed in a narrow environment, such – SNMP v1, v2c, v3 – SSH and SSL secure access as wall enclosure or electric weak box. The compact, flat and wall-mounted design fits • User privilege levels control easily in any space-limited location. It adopts the user-friendly “Front Access” design, • Built-in Trivial File Transfer Protocol (TFTP) client making the installing, cable wiring, LED monitoring and maintenance of the WGS-4215- • Static and DHCP for IP address assignment 8P2S placed in an enclosure very convenient for technicians. The WGS-4215-8P2S can • System Maintenance be installed by fixed wall mounting, magnetic wall mounting or DIN rail, thereby making – Firmware upload/download via HTTP/TFTP its usability more flexible. – Configuration upload/download through HTTP/TFTP – Hardware reset button for system reboot or reset to factory default • SNTP Network Time Protocol • Cable diagnostics • Link Layer Discovery Protocol (LLDP) Protocol and LLDP- MED • SNMP trap for interface Link-up and Link-down notification • Event message logging to remote Syslog server • Four RMON groups (history, statistics, alarms and events) • PLANET Smart Discovery Utility Environmentally Hardened Design With IP30, flat but rugged metal housing protection, the WGS-4215-8P2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the WGS-4215-8P2S can be placed in almost any difficult environment. 3

WGS-4215-8P2S IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the WGS-4215-8P2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The WGS-4215-8P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the WGS-4215-8P2S allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Efficient Traffic Control The WGS-4215-8P2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Friendly and Secure Management For efficient management, the WGS-4215-8P2S is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the WGS-4215-8P2S offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the WGS- 4215-8P2S offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. Advanced Network Security PLANET WGS-4215-8P2S offers a comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, the WGS- 4215-8P2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discarded ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Flexibility and Long-distance Extension Solution The two mini-GBIC slots built in the WGS-4215-8P2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The WGS-4215-8P2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current and transceiver supply voltage. 4

WGS-4215-8P2S Applications Security Building Automation Switch Suitable for buildings where security is strictly to be enforced, the WGS-4215-8P2S Industrial Wall-mount Managed Switch offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-4215-8P2S, a tightly-controlled network can be easily had in no time. PoE Wireless AP PoE IP Camera PoE VoIP Gigabit Ethernet Switch PoE PoE PoE Internet 1000 Core WGS-4215-8P2S Fiber Switch PoE PoE PoE 1000BASE-T UTP with PoE |O|O| 1000BASE-T UTP 100BASE-TX UTP 1000 1000BASE-SX/LX Fiber-optic |O|O| Serial Line (RS-XXX) Security Serial Server PoE Access PoE IP Camera Gate Wireless AP Control Perfect Integration Solution for IP PoE Camera and NVR System The WGS-4215-8P2S provides 8 10/100/1000Mbps 802.3at PoE ports which can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the WGS-4215-8P2S can connect to a core fiber switch and send video streams to an NVR and monitoring center. Through the high-performance switch architecture, the WGS-4215-8P2S facilitates the recorded video files from the 8 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The WGS-4215-8P2S undoubtedly brings an ideal secure surveillance system at a lower total cost. Extending Ethernet Distance Outdoor Outdoor IP Camera IP Camera Ethernet up to PoE PoE Ethernet up to 100 meters 100 meters Network Video Recorder 1000 Gigabit Fiber Switch WGS-4215-8P2S WGS-4215-8P2S 1000 1000 Fiber Optic Cable Fiber Optic Cable up to 120km up to 120km 240km 1000 1000BASE-SX/LX Fiber-optic 1000BASE-T UTP PoE 1000BASE-T UTP with PoE 5

WGS-4215-8P2S Industrial Area Switch for Data Collection and Forwarding The WGS-4215-8P2S is equipped with 8 10/100/1000Mbps ports offering auto MDI/MDIX feature providing 16Gbps non-blocking switch fabric and the 8K MAC address table so that the WGS-4215-8P2S can perform wire-speed packets transfer without the risk of packet loss. The WGS-4215-8P2S with the slim- type IP30 metal case is ideal for most heavy industrial demanding environments. PoE Access Control PoE IP Camera PoE Wireless AP PoE IP Camera PoE PoE PoE PoE 48~56V DC Power Input Internet WGS-4215-8P2S DC PoE 1000 PoE PoE IP Camera Backbone SwitchPC NVR PoE VoIP 1000 1000BASE-SX/LX Fiber-optic PoE 1000BASE-T UTP with PoE 1000BASE-T UTP DC Power Line (DC) 6

WGS-4215-8P2S Specifications Product WGS-4215-8P2S Hardware Specifications Copper Ports Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports PoE Inject Port Eight with 802.3at PoE+ injector function (Port-1 to Port-8) SFP/mini-GBIC Slots Two 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode Switch Architecture Store-and-Forward Switch Fabric 20Gbps/non-blocking Switch Throughput@64 bytes 14.8Mpps @64 bytes MAC Address Table 8K entries Shared Data Buffer 4.1 megabits Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex Jumbo Frame 10KB Reset Button < 5 sec: System reboot> 5 sec: Factory default LED Power LED: Power (Green) PoE Port (Port-1 to Port-8): PoE-in-Use (Orange)LNK/ACT (Green) 100/1000X SFP Ports (Port 9 to Port 10): 1000 LNK/ACT (Green)100 LNK/ACT (Orange) Removable 3-pin terminal block for power input Connector – Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)– Pin 3 for earth ground DC power jack with 2.0mm central pole 48~56V DC, 5A (max.) terminal block power input Power Requirements 48~56V DC, 5A (max.) DC jack power input Note: The two power input interfaces don’t support power redundant function. Power Consumption/ Dissipation Max. 210 watts/716 BTU Dimensions (W x D x H) 178 x 25 x 134 mm Weight 640g ESD Protection Contact Discharge 6KV DCAir Discharge 8KV DC Enclosure Metal Installation Fixed wall mount, magnetic wall mount or DIN rail Power over Ethernet PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE PoE Power Supply Type End-span IEEE 802.3af Standard PoE Power Output - Per port 48V~56V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 50V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 200 watts (depending on power input) Max. Number of Class 2 PDs 8 Max. Number of Class 3 PDs 8 Max. Number of Class 4 PDs 7 Layer 2 Functions Port Mirroring TX/RX/BothMany-to-1 monitor 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) VLAN Voice VLANProtocol VLAN Private VLAN (Protected port) GVRP Management VLAN Link Aggregation IEEE 802.3ad LACP and static trunkSupports 1 groups with 2 SFP ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) STP BPDU guard, BPDU filtering and BPDU forwarding IPv4 IGMP (v2/v3) snooping IGMP Snooping IGMP querier Up to 256 multicast groups MLD Snooping IPv6 MLD (v1/v2) snooping, up to 256 multicast groups Access Control List IPv4/IPv6 IP-based ACL/MAC-based ACLIPv4/IPv6 IP-based ACE/MAC-based ACE 7

WGS-4215-8P2S 8 mapping IDs to 8 level priority queues - Port Number QoS - 802.1p priority- DSCP/IP precedence of IPv4/IPv6 packets Traffic classification based, strict priority and WRR Ingress/Egress Rate Limit per port bandwidth control IEEE 802.1X port-based authentication Built-in RADIUS client to cooperate with RADIUS server RADIUS/TACACS+ authentication IP-MAC port binding MAC filtering Static MAC address Security DHCP snooping and DHCP Option82 STP BPDU guard, BPDU filtering and BPDU forwarding DoS attack prevention ARP inspection IP source guard Storm control support Broadcast/Unknown unicast/Unknown multicast Management Functions Web browser; Telnet; SNMP v1, v2c, v3 Firmware upgrade by HTTP/TFTP protocol through Ethernet network Configuration upload/download through HTTP/TFTP Basic Management Interfaces Remote/Local SyslogSystem log LLDP protocol SNTP PLANET Smart Discovery Utility Secure Management Interfaces SSH, SSL, SNMP v3 RFC 1213 MIB-II RFC 1215 Generic Traps RFC 1493 Bridge MIB SNMP MIBs RFC 2674 Bridge MIB ExtensionsRFC 2737 Entity MIB (version 2) RFC 2819 RMON (1, 2, 3, 9) RFC 2863 Interface Group MIB RFC 3635 Ethernet-like MIB Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging Standards Compliance IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 Environment Operating Temperature: -40 ~ 75 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -40 ~ 85 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Accessories – Quick Installation Guide x 1 – 3-pin Terminal Block Connector x 1 – Wall-mounted Kit x 1 Standard Accessories – DIN-rail Kit x 1 – Magnet Kit x 1 – RJ45 Dust Cap x 8 – SFP Dust Cap x 2 8

WGS-4215-8P2S Drawing Ground V - 1 2 3 4 PoE V+ PoE In-use LNK ACT PWR 9 SFP DC Input Range 48-56V 10 1000 LNK ACT 100 LNK ACT Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch WGS-4215-8P2S PoE In-use LNK ACT SFP 9 10 5 6 7 8 PoE Reset 9 10 Dimensions (unit = mm) Ordering Information WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch (-40~75 degrees C) Accessories PWR-120-48 120W 48V DC Single Output Industrial DIN-rail Power Supply (-10 ~ 60 degrees C) PWR-240-48 240W 48V DC Single Output Industrial DIN-rail Power Supply (-10 ~ 60 degrees C) PWR-480-48 480W 48V DC Single Output Industrial DIN-rail Power Supply (-25 ~ 70 degrees C) Related Products WGS-4215-8T2S Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Wall-mounted Managed Switch (-40~75 degrees C) WGS-4215-8T Industrial 8-Port 10/100/1000T Wall-mounted Managed Switch (-40~75 degrees C) WGS-804HPT Industrial 8-Port 10/100/1000T Wall-mounted Managed Switch with 4-Port PoE+ (-40~75 degrees C) WGS-804HP Industrial 8-Port 10/100/1000T Wall-mounted Gigabit Ethernet Switch with 4-Port PoE+ (-10~60 degrees C) WGS-803 Industrial 8-Port 10/100/1000T Wall-mounted Gigabit Ethernet Switch (-10~60 degrees C) 9

WGS-4215-8P2S Available Modules for WGS-4215-8P2S Gigabit Ethernet Transceiver (1000BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MGB-GT 1000 Copper -- 100m -- 0 ~ 60 degrees C MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60 degrees C MGB-SX2 1000 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MGB-LX 1000 LC Single Mode 10km 1310nm 0 ~ 60 degrees C MGB-L30 1000 LC Single Mode 30km 1310nm 0 ~ 60 degrees C MGB-L50 1000 LC Single Mode 50km 1550nm 0 ~ 60 degrees C MGB-L70 1000 LC Single Mode 70km 1550nm 0 ~ 60 degrees C MGB-L120 1000 LC Single Mode 120km 1550nm 0 ~ 60 degrees C MGB-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75 degrees C MGB-TLX 1000 LC Single Mode 10km 1310nm -40 ~ 75 degrees C MGB-TL30 1000 LC Single Mode 30km 1310nm -40 ~ 75 degrees C MGB-TL70 1000 LC Single Mode 70km 1550nm -40 ~ 75 degrees C Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MGB-LA10 1310nm 1550nm MGB-LB10 1000 WDM(LC) Single Mode 10km 0 ~ 60 degrees C1550nm 1310nm MGB-LA20 1310nm 1550nm MGB-LB20 1000 WDM(LC) Single Mode 20km 0 ~ 60 degrees C1550nm 1310nm MGB-LA40 1310nm 1550nm MGB-LB40 1000 WDM(LC) Single Mode 40km 0 ~ 60 degrees C1550nm 1310nm MGB-LA60 1310nm 1550nm MGB-LB60 1000 WDM(LC) Single Mode 60km 0 ~ 60 degrees C1550nm 1310nm MGB-TLA10 1310nm 1550nm MGB-TLB10 1000 WDM(LC) Single Mode 10km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA20 1310nm 1550nm MGB-TLB20 1000 WDM(LC) Single Mode 20km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA40 1310nm 1550nm MGB-TLB40 1000 WDM(LC) Single Mode 40km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA60 1310nm 1550nm MGB-TLB60 1000 WDM(LC) Single Mode 60km -40 ~ 75 degrees C1550nm 1310nm Fast Ethernet Transceiver (100BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 degrees C MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 degrees C MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 degrees C MFB-F120 100 LC Single Mode 120km 1310nm 0 ~ 60 degrees C MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75 degrees C MFB-TF20 100 LC Single Mode 20km 13100nm -40 ~ 75 degrees C Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MFB-FA20 1310nm 1550nm MFB-FB20 100 WDM(LC) Single Mode 20km 0 ~ 60 degrees C1550nm 1310nm MFB-TFA20 1310nm 1550nm MFB-TFB20 100 WDM(LC) Single Mode 20km -40 ~ 75 degrees C1550nm 1310nm MFB-TFA40 1310nm 1550nm MFB-TFB40 100 WDM(LC) Single Mode 40km -40 ~ 75 degrees C1550nm 1310nm PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, WGS-4215-8P2S Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10