メディアコンバーター PLANET ICS-100

ICS-100 RS-232 / RS-422 / RS-485 over Fast Ethernet Media Converter Serial Interface • One RS-232/422/485 port to one 10/100Base-TX Media Converter • Cost-effective solution for RS-232 to Ethernet application • Supports RS-232, 4-wire RS-422 or 2/4-wire RS485 operation • Asynchronous serial data rates up to 921600b/s Ethernet Interface Cost-effective Solution for RS-232 / RS-422 / RS-485 to Ethernet Application • Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX PLANET ICS-100 series Media Converter / Device Server provides to convert Serial RS- • Supports auto MDI/MDI-X function on RJ-45 Port 232 / RS-422 / RS-485 communication interface over Fast Ethernet networking. Ethernet signal allows two types of segments to connect easily, efficiently and inexpensively. This Smart Functions converter can be used as a stand-alone unit or as a slide-in module to PLANET Media • Standard TCP/IP interface and versatile operation Converter Chassis (MC-700 / MC-1500/ MC-1500R / MC-1500R48). It is time, saving modes expense for users and SIs, and there is no need to replace the existing serial equipment • Software Protocol Support ARP, ICMP,TCP/IP, UDP, and software system. HTTP server, DHCP client, Telnet server/client Remote Manageable • Built-in IP-base Web interface for remote management The ICS-100 makes connected serial equipment become the IP-based type. That also • Serial operation mode selected via Web management makes them able to connect to a TCP / IP networking immediately. Each Web-Smart • Pair connection mode for connecting two serial devices converter is able to manage Web interface. The powerful Web-Smart Media Converter over a network supports application mode and serial operation mode, connecting alarm, IP address, etc. It helps reduce the amount of valuable time that a network administrator spends • PLANET Smart Discovery utility automatically finds xxx devices on the network detecting and locating network problems; otherwise, it requires visual inspection of cabling and equipment. Multiple connection options for large networking environment are • Firmware upgrade via HTTP protocol available as well. Hardware • Compact size for easy Installation: Front Panel – Standalone - Wall mountable or DIN-rail mounting 10/100 Serial (optional accessory) LNK/ ACT – Co-work with PLANET MC family Media Chassis ( MC-700/1500/1500R) PWR RS-232/422/485 over Fast Ethernet Media Converter • LED indicators for easy network diagnose • Reset button on the front panel for reset to factory Rear Panel default 5V DC RESET Data Sheet 1 1

ICS-100 Applications Access Control System – Traditional Installation Most of the enterprises and governments use access control plate and Mifare or RFID to authorize entrance identity. With the traditional deployment, access control machine uses RS-232 or RS-485 serial interface and cables connecting to login server. With connection to ICS-10x serial over Fast Ethernet Converter, the access control machine is able to extend over longer distances via Ethernet. Or the ICS-10x can be linked to an XDSL router to get the internet access capability; the access control can be set and monitored over the Internet. Process Control To monitor, configure and manage the Robot conveyer including other machines in manufacturing, PLC (Programmable Logical Control) is required. The PLC is used to drive the above the manufacturing process. The ICS-10x can be set to TCP Server mode and connect the PLC. The administrator can configure and set command settings through Fast Ethernet intranet to control the PLC, the administrator and workstation. There is no need for the adminstrators to be always by the side of the I/O machine. RTU Data Collect – UDP Mode Connect with RTU (Remote Terminal Unit) to collect and monitor the data of waves, signal and power utilization. The ICS-10x can be used to setup UDP mode and send data over Fast Ethernet to Local server or over Internet to remote server automatically. 2

ICS-100 Surveillance Motion Control – Pair Connection Mode Using pair connection along with fiber optic patch cord, the ICS-10x extends RS-232 / RS-422 / RS-485 interfaces distance from surveillance and scanner to the control keyboard/joystick which is installed in the remote monitoring center. Specifications Model ICS-100 Serial Port Interface RS-232 / RS-422 / RS-485 Connector 3-in-1 DB9 Baud Rate (Data Rate) 300bps to 921600bps Character Bits 5,6,7,8 Parity Type Odd, Even, None, Space, Mark Stop Bit 1, 1.5/2 Flow Control HW, None RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx- Signals RS-485(2-wire): Data+, Data- RS-485(4-wire): Tx+, Tx-, Rx+, Rx- Fast Ethernet Port Standard 10/100Base-TX Connector RJ-45 Distance 100m Cable Twisted-pair Protection Built-in 1.5KV magnetic isolation Hardware System: Power LED Indicators TP Port: Link / Active Serial Port: Serial port mode, RS-232, RS-422 or RS-485 Web Management Management PLANET Smart Discovery Utility Windows Base Only: Windows XP Windows Server 2003 Windows 7 Virtual COM Utility Platform Supports Windows Server 2008 Windows 8 (Must install latest version of WinPcap) Windows Server 2012 (Must install latest version of WinPcap) Windows 10 TCP Server TCP Client UDP Client Operation Mode Virtual COM Telnet Server Pair Connection - Local (Master) Pair Connection - Remote (Slave) Dimensions(W x D x H) 97 x 70 x 26 mm Weight 200g Power Supply External Power Adaptor 5V DC / 2A max. Power Consumption 5.5 watts (max) Mechanical Metal 3

ICS-100 Operating Temperature: 0~50 degrees C Storage Temperature: -10~70 degrees C Environment Operating Humidity: 10%~90% RH Storage Humidity: 5%~90% RH Emissions FCC Class A, CE Certification Class A • IEEE 802.3 10Base-T, Standards • IEEE 802.3u 100Base-TX • EIA/TIA RS-232/422/485 Regulatory Approval RoHS Compatible Media Converter Chassis MC-700 / 1500 / 1500R Note Reset Button on the rear panel for reset to factory default Diagram Rear Panel 5V DC RESET Bottom Top Panel Front Panel 10/100 Serial LNK/ ACT PWR RS-232/422/485 over Fast Ethernet Media Converter Ordering Information ICS-100 RS-232/422/485 over Fast Ethernet Media Converter (RJ-45) – 100m ICS-101* RS-232/422/485 over Fast Ethernet Media Converter (ST, MM) – 2km ICS-102* RS-232/422/485 over Fast Ethernet Media Converter (SC, MM) – 2km ICS-102S15* RS-232/422/485 over Fast Ethernet Media Converter (SC, SM) – 15km ICS-105A RS-232/422/485 over Fast Ethernet Media Converter (SFP) – Vary on module (*): Upon request Accessories RKE-DIN DIN-Rail Mounting Kit PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City ICS-100 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2014 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 4 RS-232/422/485 over Fast Ethernet Media Converter