メディアコンバーター PLANET GT-1205A

GT-1205A 10/100/1000BASE-T to Dual 1000BASE-X SFP Media Converter Standard • Complies with IEEE 802.3 10BASE-T • Complies with IEEE 802.3u 100BASE-TX • Complies with IEEE 802.3ab 1000BASE-T • Complies with IEEE 802.3z 1000BASE-SX/LX • IEEE 802.3x full-duplex flow-control, back-pressure in PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing 2 Gigabit half-duplex eliminate packets loss SFP slots, strengthened redundant function, and other features shown below: ■ DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode Interface ■ Redundant Hardware Fiber Port • Dual 1000BASE-SX/LX SFP fiber-optic slots Highly Convenient and Distance Extendable • One 10/100/1000BASE-T Copper, auto MDI/MDIX The GT-1205A is equipped with one 10/100/1000BASE-T port and dual Gigabit function SFP slots to support conversion between 10/100/1000BASE-T and 1000BASE-X • Auto-negotiation for 10/100/1000BASE-T; half-duplex network. The dual SFP slots make the Ethernet signals connect easily and or full-duplex for 10Mbps and 100Mbps, full-duplex for efficiently by adding single-mode or multi-mode media modules or the combination 1000Mbps of both types. The GT-1205A provides high reliability and flexibility to extend • Supports maximum frame size up to 10K jumbo packet the media transmission distance up to 550m, 10km or longer, depending on the size optional 1000BASE-SX/LX SFP transceiver modules. 10/100/1000BASE-T UTP Cable up to 100meters • IEEE 802.1Q Tag VLAN transparent, multicast pass through Redundancy • Link status auto-detecting and redundant on dual ports with the same connector type • Allows only the Primary-Port or the Backup-Port to activate at a time • When the Primary-Port link fails occurs, the traffic swaps 1000BASE-X Fiber Optic up to 120km 1000BASE-X Fiber Optic up to 120km to Backup-Port automatically Adjustable 3-Port Switch Mode or 2 Fiber Port Redundant Mode • Once the Primary-Port link regains, the traffic swaps from Via the built-in DIP switch, the GT-1205A can be configured as 3-port Ethernet the Backup-Port to the Primary-Port switch or 2-port redundant media converter. In the 3-port switch mode, the GT- • Hardware fiber port redundant 1205A can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 2-port redundant mode, it provides rapid fiber redundancy Mechanical of link for highly critical Ethernet applications. The redundant mode also supports • External 5V/2.5A DC power supply auto-recovering function. If the destination port of a packet is link-down, it will forward the packet to the other port of the backup pair. • LED indicators for easy network diagnose • DIP switch for 3-port operation in Gigabit switch mode or redundant mode • Compact in size, easy installation • Co-works with PLANET 10”/19” Media Converter Chassis (MC-700/MC-1500/MC-1500R/MC-1500R48) • Wall mounting and DIN-Rail installation supported Data Sheet 1 1

GT-1205A Easy Deployment Standalone or with Chassis The GT-1205A Gigabit Media Converter can be used as a standalone unit or as a slide-in module to the PLANET Media Converter Chassis, MC-700 and MC-1500 chassis series. These media chassis can assist in providing DC power to the GT-1205A Gigabit Media Converter and the fiber-optic network can be maintained at one central location. With the 3-port switch mode, they work in high performance Store and Forward mechanism, and prevent packet loss with IEEE 802.3x Flow Control (Full-duplex) and Back Pressure (Half-duplex) function. Plug & Play Installation As the GT-1205A Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy simply by using the plug and play feature. Applications Gigabit Ethernet Distance Extension The GT-1205A directly converts the media from the Gigabit fiber to twisted pair interface. For example, it can be applied between the Gigabit Fiber Switch and the Gigabit Copper Network Card to perform media conversion and transmission. With the conversion, you can easily have the transmission distance of Gigabit copper cable extended up to 550 meters or longer (depending on SFP module). Built in with two SFP ports, the GT-1205A can integrate with the existing copper switch to provide Gigabit fiber transmission without the need of replacing with the Gigabit Fiber Switch. With the Gigabit fiber transmission, the GT-1205A enables video stream to be delivered from the camera up to 120km away to local Network Video Recorder. GT-1205A Fiber Transceiver Gigabit Switch Gigabit Switch 1000 1000 Distance up to 240km 1000 1000BASE-SX/LX Fiber-optic Fiber-Optic Networking for ISPs, System Integrators, Enterprises and Homes With high performance of data transmission and easy installation, the GT-1205A can build the ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) and FTTB (Fiber to the Building). The GT-1205A is also ideal for small office network environment of enterprises. Ethernet Extending Security & Wireless Gigabit Media Camera Converter 1000 GT-1205A Slot-into MC-Chassis 1000 Gigabit Switch 802.11n Wireless AP 1000 1000 Internet Gigabit Switch Control Room Industrial Gigabit Media Converter Router 1000 1000BASE-SX/LX Fiber-optic Industrial Ethernet 1000BASE-T UTP Internet 2

GT-1205A Fault Tolerant Redundant Link for Critical Network Applications The GT-1205A is designed for optical fiber networks that require rapid link redundancy. With the auto-recovering feature, the redundant media converter responses rapidly for critical applications. Site to Site Fiber Link Redundancy — ISP, Bank and Enterprise Primary Link 1000BASE-X Fiber (Forwarding) 1000 GT-1205A GT-1205A Redundant Media 20Km Redundant Media Converter Redundant Link Converter 1000BASE-X Fiber (Disabled) 10/100/1000BASE-T UTP 10/100/1000BASE-T UTP Gigabit Gigabit Ethernet Switch Ethernet Switch Location A Location B 1000BASE-T UTP 1000 1000BASE-SX/LX Fiber-optic Redundant Link Path to Critical Network Service Server 1000 (ATM/ Primary Link GT-1205A IP Camera/ 1000BASE-X Fiber Gigabit (Forwarding) Redundant Media Security Machine) Ethernet Switch Converter Redundant Link 1000BASE-X Fiber Gigabit (Disabled) Ethernet Switch 1000BASE-T UTP 1000 1000BASE-SX/LX Fiber-optic 3

GT-1205A Specifications Model GT-1205A Hardware Specifications Hardware Version 3 Copper One 10/100/1000BASE-T port Ports Fiber Two 1000BASE-X SFP slots 10BASE-T: 2-pair UTP Cat3,4,5, up to 100 meters Twisted-pair 100BASE-TX: 2-pair UTP Cat5, 5e up to 100 meters Cable 1000BASE-T: 4-pair UTP Cat5e,6 up to 100 meters 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220 and 550 meters 9/125μm single-mode cable Fiber-Optic Cable with distance of 10/15/20/30/40/50/60/70/120km or longer (may vary on SFP module) System: One Power LED (Green) LED Display Fiber Port: Two LNK/ACT LED (Green) TP Port: One Speed LED (Green) , One LNK/ACT LED (Orange) Switch Processing Scheme Store and Forward Fabric 6Gbps Throughput (packet per second) 4.4Mpps Maximum Packet Size 10K Bytes Flow Control Back pressure for half-duplex. IEEE 802.3x pause frame for full-duplex Power Requirements 5V DC, 2A max. Power Consumption 4 watts/13.6BTU per hour max. Dimensions (W x D x H) 94 x 70 x 26 mm Weight 180g (device only) Standard Conformance EMI Safety FCC Class B, CE Operating environment 0 ~ 50 degrees C Storage environment -10 ~ 70 degrees C Operating Humidity 5 ~ 95%, Relative Humidity, non-condensing Storage Humidity 5 ~ 95%, relative humidity (non-condensing) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX Number of PDs, 30 watts IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-SX/LX IEEE 802.3x Flow Control Ordering Information GT-1205A 10/100/1000BASE-T to Dual 1000BASE-X SFP Media Converter Accessory RKE-DIN Din-rail Kit For Media Converter Related Products Transceiver 1000BASE-SX/LX SFP Transceiver PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City GT-1205A 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 4