メディアコンバーター PLANET FT-80xシリーズ

FT-80x Series 10/100BASE-TX to 100BASE-FX Bridge Media Converters Features • Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568 • One fiber-optic, 1310nm wavelength, connector type and distance vary with model – FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm – FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm • Data Transfer Rate: – TP: 10/100Mbps – FX: 100Mbps • Duplex mode support: PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX – Full or half-duplex mode by auto-negotiation (TP) shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level – Full or half-duplex mode by DIP switch (FX) of performance supported by the device connected to the STP port. When the device • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, is a switch or a workstation that supports full duplex, the converter adapts to the full- TP LNK/ACT, TP FDX/COL duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the • DIP switch: 2 DIP switches half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch – Rear DIP switch: FX duplex mode selection provides total manual control over the half/full-duplex operation in fiber-optic interface. – Side DIP switch: LFP (Link Fault Pass-through) mode The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or selection WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available. • IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function. LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. Data Sheet 1 1

FT-80x Series Applications Standalone and Centralized Management Media Converter Installation To meet the demand for the growing network, PLANET FT-80x has provided the advanced media conversion technology. The FT-80x media converter provides various fiber connecting types to meet different network applications. It is very flexible for the FT-80x to work as a standalone device or install into the central standard media converter chassis for providing centralized power. The FT-80x is an ideal solution to building a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) and FTTB (Fiber to the Building) for ISPs, campuses and enterprises. ISP Central Buliding MC-Chassis FT-80X slot-in FT-806B20 100BASE-FX UTP 20km FT-806A20 10/100 Media Converter Fast Ethernet Switch FTTH FTTB FT-802S15 FT-802S50 100BASE-FX 100BASE-FX 15km 50km FTTP FT-802S15 FGSW-2620VM 100BASE-FX 10/100BASE-TX 10/100Media Converter FT-802S50 Headquarters Branch Office 100BASE-FX 10/100BASE-TX UTP FT-80X FT-80X UTP 100BASE-FX UTP ~100m 2km ~ 50km ~100m Fast Ethernet Switch 10/100 10/100 Fast Ethernet Switch Media Converter Media Converter 2

FT-80x Series Specifications Product FT-80x Series IEEE 802.3, 10BASE-T IEEE 802.3u, 100BASE-TX Protocol IEEE 802.3u, 100BASE-FX IEEE 802.3x, Flow Control Dimensions (W x D x H) 97 x 69 x 26 mm Weight 0.2kg Power Input 5V DC, 2A, max. Power Supply AC Adapter 100-240VAC Frequency: 50-60Hz Compact-sized metal housing Enclosure Case with anticorrosion treatment Electrostatic paint Connectors and Cables Shielded Twisted-pair RJ45, Category 5 (EIA/TIA 568) FT-801 : ST / Multi-mode / 2km FT-802 : SC / Multi-mode / 2km FT-803: MTRJ / Multi-mode / 2km FT-802S15 : SC / Single mode / 15km FT-802S35 : SC / Single mode / 35km Fiber-optic FT-802S50 : SC / Single mode / 50km FT-806A20: WDM SC / Single mode / 20km FT-806B20: WDM SC / Single mode / 20km FT-806A60: WDM SC / Single mode / 60km FT-806B60: WDM SC / Single mode / 60km Multi-mode Cable 50/125, 62.5/125 µm Single-mode (SM) Cable 9/125 µm FT-801: 1310nm FT-802: 1310nm FT-803: 1310nm FT-802S15: 1310nm FT-802S35: 1310nm Optic Wavelength FT-802S50: 1310nm FT-806A20: TX: 1310nm; RX: 1550nm FT-806B20: TX: 1550nm; RX: 1310nm FT-806A60: TX: 1310nm; RX: 1550nm FT-806B60: TX: 1550nm; RX: 1310nm FT-801: -14 FT-802: -14 FT-803: -14 FT-802S15:0 FT-802S35:-8 Max. Launch Power (dBm) FT-802S50:0 FT-806A20:-8 FT-806B20:-8 FT-806A60:0 FT-806B60:0 FT-801: -20 (62.5/125µm), -23.5 (50/125µm) FT-802: -20 (62.5/125µm), -23.5 (50/125µm) FT-803: -20 (62.5/125µm), -23.5 (50/125µm) FT-802S15: −20 FT-802S35: -15 Min. Launch Power (dBm) FT-802S50:-5 FT-806A20:-14 FT-806B20:-14 FT-806A60:-5 FT-806B60:-5 FT-801: -31.8 FT-802: -31.8 FT-803: -31.8 FT-802S15: -32 FT-802S35:-34 Receive Sensitivity (dBm) FT-802S50: -35 FT-806A20:-31 FT-806B20:-31 FT-806A60:-34 FT-806B60:-34 3

FT-80x Series FT-801: -14 FT-802: -14 FT-803: -14 FT-802S15:0 FT-802S35:0 Maximum Input Power (dBm) FT-802S50:0 FT-806A20:0 FT-806B20:0 FT-806A60:0 FT-806B60:0 Supported Distances and Functions Shielded Twisted-pair 100m (328 ft.) 412m (1,350 ft.) (half-duplex) Multi-mode Fiber Optic 2km (1.2 miles) (full-duplex) 412m (1,350 ft.) (half-duplex) 15km (9 miles) (full-duplex) 20km (12 miles) (full-duplex) Single-mode (SM) 35km (21 miles) (full-duplex) 50km (31 miles) (full-duplex) 60km (37 miles) (full-duplex) TP: Half and full duplex, auto-negotiation Port Mode FX: Half and full duplex via DIP switch Environment & Emissions Temperature: 0~50 degrees C Operating Environment Humidity: 5~90% non-condensing Temperature: -40~70 degrees C Storage Environment Humidity: 5~90% non-condensing Emissions FCC Class A, CE Class A Ordering Information FT-801 10/100BASE-TX to 100BASE-FX (ST, MM) Bridge Media Converter -- 2km FT-802 10/100BASE-TX to 100BASE-FX (SC, MM) Bridge Media Converter -- 2km FT-802S15 10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter -- 15km FT-802S35 10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter -- 35km FT-802S50 10/100BASE-TX to 100BASE-FX (SC, SM) Bridge Media Converter -- 50km FT-803 10/100BASE-TX to 100BASE-FX (MT-RJ, MM) Bridge Media Converter FT-806A20 * 10/100BASE-TX to 100BASE-FX (WDM TX:1310nm, SM) Bridge Media Converter -- 20km FT-806B20 * 10/100BASE-TX to 100BASE-FX (WDM TX:1550nm, SM) Bridge Media Converter -- 20km FT-806A60 * 10/100BASE-TX to 100BASE-FX (WDM TX:1310nm, SM) Bridge Media Converter -- 60km FT-806B60 * 10/100BASE-TX to 100BASE-FX (WDM TX:1550nm, SM) Bridge Media Converter -- 60km FT-806A20/806B20 and FT-806A60/806B60 should run in pair. It means you must connect FT-806A20 / FT- Remarks * 806A60 to one end while FT-806B20 / FT-806B60 to the other end. Related Products MC-700 7-slot 10" Media Converter Chassis MC-1500 15-slot 19" Media Converter Chassis MC-1500R 15-slot Media Converter Chassis (AC Power) MC-1500R48 15-slot Media Converter Chassis (DC Power) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City FT-80x Series 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2015 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 4