1/7ページ
カタログの表紙 カタログの表紙 カタログの表紙
カタログの表紙

このカタログをダウンロードして
すべてを見る

ダウンロード(1.7Mb)

産業用PoEスイッチPLANET IPOE-171-95W

製品カタログ

1ポート 10/100/1000Mbps 802.3bt PoE インジェクター(95W,-40-75℃,24-48VDC)

特長
■2つのRJ45インタフェース
- 1ポートのデータ+電源出力
- 1ポートのデータ入力
■マスタおよびスレーブ電源入力用の1端子ブロック。(電源範囲:24〜48V DC冗長電源)
■1 PoEモード(標準/レガシー)DIPスイッチ
■IEEE 802.3af / at / bt PoEエンドスパン/ミッドスパンPSEに準拠
■PoEポートで最大95ワットのPoE電力をサポート
■PoE IEEE 802.3af / at / bt機器および機器の不正な設置による損傷の自動検出
■PoEの総使用状況をリアルタイムで監視
■100mまでの遠隔給電
■DC入力電圧の自動検出
■IP30スリムタイプメタルケース
■電源LED、PoE使用中LEDおよびPoE使用LEDのLEDインジケータ
■一体型壁面マウントまたはDINレールマウント
■6KV DCイーサネットESD保護をサポート
■-40〜75℃の動作温度

仕様 
■インターフェイス
 インプットポート
  1 x RJ45 STP
  Data In
 アウトプットポート
  1 x RJ45 STP
  PoE (Data + Power) Out
 Input power terminal block 1
■電源
 24~48V DC, 5A (max.)
■メカニカル
 IP30スリム型メタルケース
 135mm(W) x 87.8mm(D) x 32mm(H)、470g
■環境
 動作温度 -40 ~ 75 ℃
 保存温度 -40 ~ 85℃

このカタログについて

ドキュメント名 産業用PoEスイッチPLANET IPOE-171-95W
ドキュメント種別 製品カタログ
ファイルサイズ 1.7Mb
登録カテゴリ
取り扱い企業 サンテックス株式会社 (この企業の取り扱いカタログ一覧)

この企業の関連カタログ

この企業の関連カタログの表紙
LITEMAX Spanpixel SSD2106-Y
製品カタログ

サンテックス株式会社

この企業の関連カタログの表紙
LITEMAX Spanpixel SSD4887-B
製品カタログ

サンテックス株式会社

この企業の関連カタログの表紙
LITEMAX Spanpixel SSD4848-A
製品カタログ

サンテックス株式会社

このカタログの内容

Page1

IPOE-171-95W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95 Watts, -40~75 degrees C, 12~48V DC) Interface • 2 RJ45 interfaces – 1-port Data + Power output – 1-port Data input • 1 terminal block for master and slave power input. (Power Range: 12 ~ 48V DC redundant power) • 1 PoE mode (standard/legacy) DIP switch Advanced Industrial 802.3bt Ultra PoE Network Solution Power over Ethernet PLANET IPOE-171-95W is a Single-Port, Industrial 802.3bt Power over • Complies with IEEE 802.3at/bt PoE end-span/mid-span PSE Ethernet Injector with a maximum of up to 95 watts of power output over Ethernet cables. • Supports PoE power up to 95 watts for PoE port • Auto-detection of PoE IEEE 802.3at/bt equipment and devices from being damaged by incorrect installation • Monitors the status of the total PoE usage in real time • Remote power feeding up to 100m Hardware • IP30 slim type metal case • LED indicators for Power LED , PoE-in-Use LED and PoE It is designed specifically to meet the demand for growing higher power required Usage LED network equipment such as: ● Lighting Industrial Case and Installation ● All-in-one touch PC ● Remote digital signage display • Solid wall mount or DIN-rail mount installation ● Other network devices that need higher power to work normally • Supports 6KV DC Ethernet ESD protection • -40 to 75 degrees C operating temperature 802.3bt 60~95W Thin POS Digital Health Lighting Client System Signage Care 802.3at 30W Door PTZ 11ac Phone Camera Wi-Fi AP 802.3af 15W IP Phone IP Camera 1
Page2

IPOE-171-95W The IPOE-171-95W delivers the Ethernet digital data with 54V DC power over the twisted-pair cables as a 95-watt Power over Ethernet Injector, and the connected ultra Power over Ethernet splitter, the IPOE-171S, will separate the digital data and the power into three optional outputs (12V/24V DC) with distance up to 100 meters. Convenient and Reliable Power System To facilitate the 802.3bt PoE++ usage with commonly used 12~48V DC power input for transportation and industrial-level applications, the IPOE-171-95W adopts 12~48V DC to 54V power boost technology to solve power source issue but does not require special power supplies. The IPOE-171-95W provides an integrated power solution with a wide range of voltages (12~48V DC) for worldwide operability. It also provides dual-redundant, reversible polarity 12~48V DC power supply inputs for high availability applications. Redundant Power Input 12~48V DC 10/100/1000BASE-T 802.3at/bt 54V DC PoE PoE Compliant PD Device 10/100/1000BASE-T 12~48V DC to 54V DC PoE Power Boost 10/100/1000Mbps Ethernet Data Rate 95 watts of Power over 4-pair UTP The IPOE-171-95W and IPOE-171S Ultra PoE solutions use the same cabling standard such as IEEE 802.3at PoE. Instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), it provides the capability to source up to 95 watts of power by using all the four pairs of standard Cat. 5e/Cat. 6 Ethernet cabling. IPOE-171-95W Power End-span 10/100/1000Mbps Data Mid-span Cat 5E: 4-pair UTP 95W Power over Ethernet 10/100/1000Mbps Data Ultra PoE Injector 12V/24V Ultra PoE Splitter PoE Standard IEEE 802.3af IEEE 802.3at IEEE 802.3bt IEEE 802.3bt PoH(802.3at Type 2) (802.bt Type 3) (802.3bt Type 4) (Power over HD-BASE-T) Maximum Power delivered by PSE 15.4 watts 30 watts 60 watts 90 watts 95 watts Power Available at PD 12.95 watts 25.5 watts 51 watts 71 watts 72 watts Voltage Range 48V 50~57V 50~57V 52~57V 52~57V Twisted-pair Used 2-pair 4-pair 4-pair 4-pair Supported Modes End-span or Mid-span End-span + Mid-span End-span + Mid-span End-span + Mid-span Supported Cabling Cat. 3/5/5e/6 Cat. 5e/6 Cat. 5e/6 Cat. 5e/6 2
Page3

IPOE-171-95W Intelligent LED Indicator for Power Input and Real-time PoE Usage The IPOE-171-95W helps users to monitor the current status of power input and PoE power usage easily and efficiently via its advanced LED indication. “Power Input” allows user to know the status of power input. “PoE Power Usage” displayed on the panel of the IPOE-171-95W has three LED indicators of different power usages. Via the power usage LED, the IPOE-171-95W enables the administrator to monitor the status of the power usage of the connected PDs in real time. High compatibility and Compact Size Design It is easy to install the PoE injector by way of Plug and Play and comes with simple troubleshooting, making it easy for business and home users to own it. Besides, the IPOE-171-95W comes in compact housing, and provides two DC redundant power inputs, two power LEDs, fault LED and PoE-in-use LED. Two RJ45 ports -- Ethernet port and Ethernet + DC port – are on the front panel. Moreover, the IPOE-171-95W, when switched to the legacy mode, provides power to those PD devices which do not fully follow the IEEE 802.3at/bt standard. It is helpful to enhance the compatibility of IPOE-171-95W with other PDs. Simply plug in the Ethernet cables and DC power wire, and the IPOE-171-95W is ready to provide high-speed network communication and the 802.3bt PoE injector functions simultaneously with no need of software configuration. Quick and Easy Cabling Installation for PoE Network Deployment Backward compatible with both 802.3at PoE standards, the IPOE-171-95W allows users to flexibly deploy standard and high powered devices to transfer data and power simultaneously through one Ethernet cable for up to 100 meters. The IPOE-171-95W frees the security IP camera and wireless AP deployment from restrictions of power outlet locations and the additional AC wiring. It thus reduces cables and eliminates the need for electrical outlets on the wall, ceiling or any unreachable place, and most of all, it reduces installation time. Power Powered Device PoE IP Camera PDoawtaer 10/100/1000Mbps Ethernet Switch 9650W PoE Wireless AP Power PDoawtaer RJ45 UTP Cable IPOE-171-95W Ultra PoE Splitter 3
Page4

IPOE-171-95W Stable Operating Performance under Difficult Environments Today, the PoE demand expands from commercial applications to many critical networks in the harsh environment. The IPOE-171 series will be one of the ideal solutions that provide a high level of immunity against electromagnetic interference and heavy electrical surges typical of environments found on plant floors or in curb side traffic control cabinets. The IPOE-171 series can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network. The IPOE-171 series is also equipped with a compact IP30 standard metal case that allows either DIN-rail or wall mounting for efficient use of cabinet space. Non-PoE IP Camera DC IPOE Splitter Monitoring Center IPOE-171-95W Gigabit Switch PoE Power Data 100 meters DC Power Line (DC) 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Applications Installation of 802.3bt PoE Injector Due to the backward capability of IEEE 802.3at PoE standard, the IPOE-171-95W can directly connect with any IEEE 802.3at end-nodes, such as PTZ (Pan, Tilt & Zoom) speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points 100 meters DC Input Power DC Supply Power 75 ℃ -40 ℃ Data Power Data PoE PTZ Industrial PoE IP Camera Switch IPOE-171 Series 1000BASE-T UTP PoE 1000BASE-T UTP with PoE DC Power Line (DC) 4
Page5

IPOE-171-95W Installation of 802.3bt PoE Injector and Splitter For a place which is hard to find the power inlet, the IPOE-171-95W and IPOE-171S operate as a pair to provide the easiest way to power your Ethernet devices which need high power input, such as PTZ network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points installed on the top of the building or used in enterprise office or home. 100 meters DC Input Power DC Supply Power 75 ℃ -40 ℃ Industrial 802.3bt PoE Splitter Data Power Data Digital Signage Industrial PoE Switch Data IPOE-171 Series DC Power 1000BASE-T UTP 12V/24V DC Output PoE 1000BASE-T UTP with PoE DC Power Line (DC) Extended Installation of IEEE 802.3bt Injector and PoE Network Is 100-meter cable long enough for a wide range of IP surveillance deployments? The answer is certainly not. To achieve the benefits of IP surveillance and also the long-distance IP camera distribution, the IPOE-171-95W and PLANET PoE Extender, IPOE-E172, can be a quick and cost-effective option. In the simplest application, the PoE Extender enables a PoE IP camera to be installed up to 200 meters away from the IPOE-171-95W. The IPOE-171-95W delivers PoE power over the first 100 meters to the PoE Extender over UTP cables, and then the PoE Extender forwards the Ethernet data and remaining PoE power to the remote PoE IP cameras. 100 meters 100 meters DC Input Power DC Supply Power 75 ℃ -40 ℃ Data Power Data Power Data Industrial PoE PoE Switch IPOE-171 Series Industrial 802.3bt PoE PTZ PoE Extender IP Camera 1000BASE-T UTP PoE 1000BASE-T UTP with PoE DC Power Line (DC) 5
Page6

IPOE-171-95W Specifications Product IPOE-171-95W Hardware Specifications Input Port 1 x RJ45 STPData In Interface Output Port 1 x RJ45 STPPoE (Data + Power) Out Input power terminal block 1 Twisted-pair cable up to 100 meters (328ft) Network Cable 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 System: Power 1 (Green) Power 2 (Green) LED Indicator Fault (Red)PoE Port: PoE-in-Use x 1 (Orange) PoE Usage: PoE Usage x 3 (Orange) Data Rate 10/100/1000Mbps Dimensions (W x D x H) 135 x 87.8 x 32 mm Weight 470g Power Requirements DC 12~48V, 5A max. Unit Output Voltage DC 54V Power Consumption 120 watts max. No. of devices that can be powered 1 Installation DIN-rail kit or wall-mount ear Alarm Provides one relay output for power failureAlarm Relay current carry ability: 1A @ DC 24V Enclosure IP30 slim type metal case Power over Ethernet PoE Standard IEEE 802.3at/bt Ultra PoE PSE PoE Power Output Budget DC 54V / 95-watt PoE via 4-pairDC 54V / 36-watt PoE via 2-pair DC 24V~48V input: Max. 89.5W@1m cable PoE Power Output Max. 75W@100m cableDC 12V input: Max. 60W@1m cable Max. 52W@100m cable PoE Power Supply Type End-span + Mid-span Power Pin Assignment Pair 1 End-span: 1/2 (-), 3/6 (+)Pair 2 Mid-span: 4/5 (+), 7/8 (-) PoE Mode Standard: To provide power to the PD devices that follow the IEEE 802.3at/bt standard.Legacy: To provide power to the PD devices that do not fully follow the IEEE 802.3af/at/bt standard. Standards Conformance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet Standards Compliance IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 4 IEEE 802.3at Power over Ethernet Plus Regulatory Compliance FCC Part 15 Class A, CE Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Operating Humidity 5 ~ 90%, relative humidity, non-condensing Storage Humidity 5 ~ 90%, relative humidity, non-condensing Standard Accessories ■ IPOE-171-95W ■ User's manual Package Contents ■ Wall-mount kit ■ Dust cap Ordering Information IPOE-171-95W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (95 watts, -40~75 degrees C, 12~48V DC) 6
Page7

IPOE-171-95W Related Products IPOE-171-60W Industrial Single-Port 10/100/1000Mbps 802.3bt PoE Injector (60 Watts, -40~75 degrees C, 48~56V DC) IPOE-162 Industrial IEEE 802.3at Gigabit High Power over Ethernet Injector (Mid-span) IPOE-171S Industrial Single-Port 10/100/1000Mbps Ultra PoE Splitter IPOE-E172 Industrial 1-Port Ultra PoE to 2-Port 802.3bt/at Gigabit PoE Extender IPOE-E174 1-port Ultra PoE to 4-port 802.3af/at Gigabit PoE Extender ICA-E6265 2 Mega-pixel IR PoE Plus Speed Dome IP Camera with Extended Support PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IPOE-171-95W Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 7