産業用PoEスイッチPLANET IGS-5225-24P4S

IGS-5225-24P4S Industrial L2+ 24-Port 10/100/1000T 802.3at PoE + 4-Port shared 100/1000X SFP Managed Switch (-40~75 degrees C) Physical Port • 24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24, compatible with 100BASE-FX SFP • One RJ45 console interface for basic management and setup Environmentally Hardened Design Power over Ethernet PLANET IGS-5225-24P4S, a new industrial Layer 2+ managed Gigabit Switch, features • Complies with IEEE 802.3at Power over Ethernet Plus/end- 24 10/100/1000Mbps IEEE 802.3af/at PoE injector ports and 4 shared SFP ports, and span PSE supports static Layer 3 routing in a 1U case. With a total switch fabric of 48Gbps, • Up to 24 IEEE 802.3af/802.3at devices powered the IGS-5225-24P4S can handle large amounts of data in a secure topology linking • Supports PoE power up to 36 watts for each PoE port to an industrial backbone or high-capacity servers. The IGS-5225-24P4S is capable • Auto detects powered device (PD) of providing non-blocking switch fabric and wire-speed throughput in the temperature • Circuit protection prevents power interference between ports range from -40 to 75 degrees C without any packet loss and CRC error. It greatly • Remote power feeding up to 100m simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth • PoE management features – Total PoE power budget control demands. Furthermore, it adopts user-friendly “Front Access” design for easy wiring and – Per port PoE function enable/disable maintenance of the IGS-5225-24P4S when placed in the cabinet. – PoE admin-mode control – PoE port power feeding priority – Per PoE port power limit 2 x DI & DO 4 x 100/1000BASE-X SFP Slot – PD classification detection 24 x Gigabit PoE+ RJ45 • Intelligent PoE features – Temperature threshold control – PoE usage threshold control – PD alive check – PoE schedule Industrial Case & Installation 4 x Combo Interface • IP30 metal case protection 2 x DC Power Input RJ45 Type Console • 19-inch rack-mountable design • 48~56V DC, redundant power with polarity reverse protect function Redundant Ring, Fast Recovery for Critical Network Applications • Supports 6000V DC Ethernet ESD protection The IGS-5225-24P4S supports redundant ring technology and features strong, rapid • -40 to 75 degrees C operating temperature self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Digital Input and Digital Output Spanning Tree Protocol (802.1s MSTP), and redundant power input system into • 2 Digital Input (DI) customer’s industrial automation network to enhance system reliability and uptime in • 2 Digital Output (DO) harsh factory environments. In a simple ring network, the recovery time of data link can • Integrate sensors into auto alarm system be as fast as 20ms. • Transfer alarm to IP network via email and SNMP trap 1

IGS-5225-24P4S Layer 3 IP Routing Features Office Factory • Supports maximum 32 software static routes and route 1000 summarization Industrial MAN Switch IGS-5225-24P4S Layer 2 Features 1000 E.R.P.S. Ring for Metropolitan Area Network Application • Prevents packet loss with back pressure (half-duplex) and Recovery Time < 50ms IEEE 802.3x pause frame flow control (full-duplex) 1000 • High performance of Store-and-Forward architecture, and runt/ CRC filtering eliminates erroneous packets to optimize the network bandwidth PoE PoE • Storm Control support 1000 8-Port MAN Switch 1000 – Broadcast/Multicast/Unicast Industrial Highway Control Center • Supports VLANPoE Switch Industrial PoE Switch – IEEE 802.1Q tagged VLAN – Up to 255 VLANs groups, out of 4094 VLAN IDs High Power PoE for Security and Public Service Applications – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) To fulfill the demand of High Power PoE for network applications with Gigabit – Private VLAN Edge (PVE) speed transmission under wide temperature, the IGS-5225-24P4S provides 24 – Protocol-based VLAN 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that – MAC-based VLAN – Voice VLAN combines up to 400-watt power output and data per port over one Cat.5E/6 Ethernet • Supports Spanning Tree Protocol cable. With a total 400-watt PoE budget on the whole system, the IGS-5225-24P4S is – IEEE 802.1D Spanning Tree Protocol (STP) designed specifically to satisfy the growing demand of higher power consuming network – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras, – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), multi-channel (802.11a/b/g/n) wireless LAN access points and other PoE network spanning tree by VLAN devices by providing PoE power, doubling that of the current conventional 802.3af PoE. – BPDU Guard • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) PTZ – Maximum 12 trunk groups with 4 ports per trunk group Camera – Up to 8Gbps bandwidth (duplex mode) Video WiMAX Phone AP/CPE • Provides port mirror (1-to-1) • Port mirroring to monitor the incoming or outgoing traffic on a particular port 30.8W Door • Loop protection to avoid broadcast loopsThin Client Phone • Supports ERPS (Ethernet Ring Protection Switching) Power Upgrade 15.4W Quality of Service • Ingress Shaper and Egress Rate Limit per port bandwidth control Wireless IP Phone AP/Router • 8 priority queues on all switch ports • Traffic classification IP Camera – IEEE 802.1p CoS Intelligent Alive Check for Powered Device – IP TOS/DSCP/IP precedence The IGS-5225-24P4S PoE Switch can be configured to monitor connected PD’s status – IP TCP/UDP port number – Typical network application in real time via ping action. Once the PD stops working and responding, the IGS-5225- • Strict priority and Weighted Round Robin (WRR) CoS policies 24P4S will recycle the PoE port power and bring the PD back to work. It also greatly • Supports QoS and In/Out bandwidth control on each port enhances the reliability in that the PoE port will reset the PD power, thus reducing • Traffic-policing policies on the switch port administrator’s management burden. • DSCP remarking 2

IGS-5225-24P4S Step 1 Step 2 PD Status PT PoE Camera No Response...... Good!! Ping Request Multicast Ping Request • Supports IGMP snooping v1, v2 and v3 Ping Echo Check alive status for 3 times • Supports MLD snooping v1 and v2 Step 3 Step 4 • Querier mode support Alarm Notification PoE PD Alive!! • IGMP snooping port filtering PoE • MLD snooping port filtering ON OFF ON ON • MVR (Multicast VLAN Registration) Restart PoE device if without response PoE Schedule for Energy Saving Security Under the trend of energy saving worldwide and contributing to environmental protection • IEEE 802.1x port-based/MAC-based network access on the Earth, the IGS-5225-24P4S can effectively control the power supply besides its authentication capability of giving high watts power. The built-in “PoE schedule” function helps you to • Built-in RADIUS client to cooperate with the RADIUS servers enable or disable PoE power feeding for each PoE port during specified time intervals • TACACS+ login users access authentication • RADIUS/TACACS+ users access authentication and it is a powerful function to help SMBs or enterprises save power and money. • IP-based Access Control List (ACL) • MAC-based Access Control List • Source MAC/IP address binding 8 AM 5 PM 5 PM 8 AM • DHCP snooping to filter distrusted DHCP messages • Dynamic ARP Inspection discards ARP packets with invalid PoE PoE PoE PoE PoE PoE PoE PoE MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks • IP address access management to prevent unauthorized Power Power Power Power Power Power Power Power On On On On Off Off Off On intruder 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Total Consumption of 36 watts/hr Save 24 watts / hr during off-business hours Total Saved = 10800watts / month PoE 1000BASE-TX UTP with PoE Management • Switch Management Interfaces Digital Input and Digital Output for External Alarm – Console/Telnet Command Line Interface The IGS-5225-24P4S supports Digital Input and Digital Output on its front panel. This – Web switch management external alarm enables users to use Digital Input to detect and log external device status – SNMP v1 and v2c switch management (such as door intrusion detector), and send event alarm to the administrators. The Digital – SSH/SSL and SNMP v3 secure access Output could be used to alarm the administrators if the IGS-5225-24P4S port shows link • Four RMON groups (history, statistics, alarms, and events) down, link up or power failure. • IPv6 IP address/NTP/DNS management • Built-in Trivial File Transfer Protocol (TFTP) client Digital Input • BOOTP and DHCP for IP address assignment Security OK!! Alarm Warning Alarm Messaging • Firmware upload/download via HTTP/TFTP • DHCP Relay • DHCP Option 82 • User Privilege levels control I/O I/O I/O /O Enclosure Enclosure I SNMP TRAP • Network Time Protocol (NTP) Door Detector Door Detector Mail System (Door Closed) (Door Open) Log • Link Layer Discovery Protocol (LLDP) • SFP-DDM (Digital Diagnostic Monitor) Digital Output • Cable diagnostic technology provides the mechanism to detect and report potential cabling issues I/O I/O I/O I/O • Reset button for system reboot or reset to factory default • PLANET Smart Discovery Utility for deployment management DC Power Failure RJ45 Cable Fiber Cable Link Down Link Down 3

IGS-5225-24P4S Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible Management To help customers stay on top of their businesses, the IGS-5225-24P4S not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secured, flexible management and simpler networking application. Robust Layer 2 Features The IGS-5225-24P4S can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-5225-24P4S provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-5225-24P4S allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 12 trunk groups with 4 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-5225-24P4S is equipped with console, Web and SNMP management interfaces. With the built-in Web-based interface, the IGS-5225-24P4S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-5225-24P4S can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMP v3 connection which encrypts the packet content at each session. IGS-5225-24P4S 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH Powerful Security The IGS-5225-24P4S offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before. Flexibility and Extension Solution The four mini-GBIC slots built in the IGS-5225-24P4S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber- optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/50/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. 4

IGS-5225-24P4S Applications Perfect Integration Solution for Outdoor IP PoE Camera and NVR System The IGS-5225-24P4S provides 24 10/100/1000Mbps 802.3at PoE+ ports and can offer sufficient PoE power to 24 PoE IP cameras at the same time. In addition, with the 4 100/1000BASE-X SFP interfaces, the IGS-5225-24P4S can connect to core fiber switch and send video stream to NVR and monitoring center. Through the high-performance switch architecture, the IGS-5225-24P4S facilitates the recorded video files from the 24 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored both in the local LAN and the remote site via Internet. The IGS-5225- 24P4S undoubtedly brings an ideal secure surveillance system at a lower total cost. Industrial Area Department/Workgroup PoE Switch Providing up to 24 PoE+, in-line power interfaces, the IGS-5225-24P4S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 24 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-24P4S makes the installation of IP cameras or wireless AP easier and more efficient. PoE+ PTZ Wireless AP VoIP Phone Speed Dome PoE PoE PoE Core Switch IGS-5225-24P4S |O|O| PoE 1000BASE-T UTP with PoE 100BASE-TX UTP 1000BASE-T UTP Security Gate Serial Server Access Control IP Camera |O|O| Serial Line (RS-XXX) High Power IP Surveillance and Wireless LAN Service in Public Transportation With IEEE 802.3at Power over Ethernet Plus standard, the IGS-5225-24P4S can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points. Wireless LAN would be more efficient for the transportation station to provide high speed and wide area Internet services for travelers. With the PoE wireless LAN structure, the transportation authority gains benefits from less cost while providing better Internet services in wider areas for the travelers. Central Management Center N N N N PoE Wireless AP (PD) N PoE PoE N PoE PoE PoE IP Camera IGS-5225-24P4S 1000 802.3af Wireless AP IGS-5225-24P4S PoE Wireless AP IGS-5225-24P4S N N N 1000 1000 N PoE Core Switch PoE PTZ Camera 802.3at Splitter PoE PoEPoE N N DC DC 802.3at Splitter PTZ Camera DC Airport 100BASE-TX UTP 1000 1000BASE-SX/LX Fiber-optic PoE 100BASE-TX UTP w PoE N Power Line (DC) 2.4GHz 802.11n Train Station DC 5

IGS-5225-24P4S Specifications Product IGS-5225-24P4S Hardware Specifications Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports SFP/mini-GBIC Slots 4 1000BASE-SX/LX/BX SFP interfaces , shared with Port-21 to Port-24Compatible with 100BASE-FX SFP PoE Injector Port 24 ports with 802.3at/af PoE injector function with Port-1 to Port-24 Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 48Gbps/non-blocking Throughput (packet per second) 35.71Mpps@ 64Bytes packet Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4Mbits Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex Jumbo Frame 9Kbytes Reset Button < 5 sec: System reboot> 5 sec: Factory default ESD Protection 6KV DC Enclosure IP30 metal case Installation 19-inch rack-mountable design Fixed 6-pin terminal block for power input Connector Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) DI, DO Input load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24V DC, 100mA max. System: DC 1 (Green) DC 2 (Green) Fault Alarm (Red) I/O (Red) PoE Fault (Red) PoE Max. (Red) LED Indicator Ring (Green) Ring Owner (Green) Per 10/100/1000T RJ45 PoE+ Ports: PoE-in-Use (Orange) LNK/ACT (Green) Per SFP Interface: 100 LNK/ACT (Orange) 1000 LNK/ACT (Green) Dimensions (W x D x H) 440 x 300 x 44.5 mm Weight 3638g Power Requirements Dual 48~56V DC (>53V DC for PoE+ output recommended) Power Consumption Max. 23.9 watts/81.55BTU (Power on without PoE loading)Max. 423 watts/1443.34BTU (Full loading with PoE function) Power Over Ethernet PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~53V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 53V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) 48V Power input - 300W maximum (depending on power input) PoE Power Budget 56V Power input - 400W maximum (depending on power input) Max. number of Class 2 PDs 24 Max. number of Class 3 PDs 24 Max. number of Class 4 PDs 15 Layer 2 Function Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 6

IGS-5225-24P4S Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selectionFlow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status,auto negotiation status, trunk status Port Mirroring TX/RX/both1 to 1 monitor 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) VLAN MAC-based VLANProtocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs Link Aggregation IEEE 802.3ad LACP/static trunkSupports 12 trunk groups with 4 ports per trunk group Traffic classification based, strict priority and WRR 8-level priority for switching QoS - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IGMP Snooping IGMP (v1/v2/V3) snooping, up to 255 multicast groupsIGMP querier mode support MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groupsMLD querier mode support Access Control List IP-based ACL/MAC-based ACLUp to 123 entries Per port bandwidth control Bandwidth Control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB SNMP MIBs RFC-2819 RMON MIB (Group 1, 2, 3 and 9)RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Layer 3 Function IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries Routing Protocols IPv4 software static routingIPv6 software static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service Standards Compliance IEEE 802.1Q VLAN taggingIEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 7

IGS-5225-24P4S Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Drawing Rear View Top View Input DC 48-56V 2 4 6 8 10 12 14 16 18 20 22 24 22 24 1000 LNK/ACT CAUTION IGS-5225-24P4S 100 LNK/ACT Please refer to user’s manual before PoE connect the DC wire. FAL Max. DC Input Range: 48V-56V DC 2 4 6 8 10 12 14 16 18 20 22 24 Console FAL I/O DC2 Ring 1 3 5 7 9 11 13 15 17 19 21 23 Reset + + DC1 R.O.DI 0 DI 1 DO 0 DO 1 GND GND LNK ACT PoE In-Use PoE 1 3 5 7 9 11 13 15 17 19 21 23 21 23 115200, N, 8, 1DC 1 Fault DC 2 Front View Dimensions (unit = mm) Ordering Information IGS-5225-24P4S Industrial L2+ 24-Port 10/100/1000T 802.3at PoE + 4-port shared 100/1000X SFP Managed Switch (-40~75 degrees C) 8 Side View Side View

IGS-5225-24P4S Available Modules for IGS-5225-24P4S Gigabit Ethernet Transceiver (1000BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MGB-GT 1000 Copper -- 100m -- 0 ~ 60 degrees C MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60 degrees C MGB-SX2 1000 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MGB-LX 1000 LC Single Mode 10km 1310nm 0 ~ 60 degrees C MGB-L30 1000 LC Single Mode 30km 1310nm 0 ~ 60 degrees C MGB-L50 1000 LC Single Mode 50km 1550nm 0 ~ 60 degrees C MGB-L70 1000 LC Single Mode 70km 1550nm 0 ~ 60 degrees C MGB-L120 1000 LC Single Mode 120km 1550nm 0 ~ 60 degrees C MGB-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75 degrees C MGB-TLX 1000 LC Single Mode 10km 1310nm -40 ~ 75 degrees C MGB-TL30 1000 LC Single Mode 30km 1310nm -40 ~ 75 degrees C MGB-TL70 1000 LC Single Mode 70km 1550nm -40 ~ 75 degrees C Gigabit Ethernet Transceiver (1000BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MGB-LA10 1310nm 1550nm MGB-LB10 1000 WDM(LC) Single Mode 10km 0 ~ 60 degrees C1550nm 1310nm MGB-LA20 1310nm 1550nm MGB-LB20 1000 WDM(LC) Single Mode 20km 0 ~ 60 degrees C1550nm 1310nm MGB-LA40 1310nm 1550nm MGB-LB40 1000 WDM(LC) Single Mode 40km 0 ~ 60 degrees C1550nm 1310nm MGB-LA60 1310nm 1550nm MGB-LB60 1000 WDM(LC) Single Mode 60km 0 ~ 60 degrees C1550nm 1310nm MGB-TLA10 1310nm 1550nm MGB-TLB10 1000 WDM(LC) Single Mode 10km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA20 1310nm 1550nm MGB-TLB20 1000 WDM(LC) Single Mode 20km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA40 1310nm 1550nm MGB-TLB40 1000 WDM(LC) Single Mode 40km -40 ~ 75 degrees C1550nm 1310nm MGB-TLA60 1310nm 1550nm MGB-TLB60 1000 WDM(LC) Single Mode 60km -40 ~ 75 degrees C1550nm 1310nm Fast Ethernet Transceiver (100BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 degrees C MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 degrees C MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 degrees C MFB-F120 100 LC Single Mode 120km 1310nm 0 ~ 60 degrees C MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75 degrees C MFB-TF20 100 LC Single Mode 20km 13100nm -40 ~ 75 degrees C Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MFB-FA20 1310nm 1550nm MFB-FB20 100 WDM(LC) Single Mode 20km 0 ~ 60 degrees C1550nm 1310nm MFB-TFA20 1310nm 1550nm MFB-TFB20 100 WDM(LC) Single Mode 20km -40 ~ 75 degrees C1550nm 1310nm MFB-TFA40 1310nm 1550nm MFB-TFB40 100 WDM(LC) Single Mode 40km -40 ~ 75 degrees C1550nm 1310nm PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IGS-5225-24P4S Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9