産業用PoEスイッチPLANET IGS-6325-24P4X

IGS-6325 Rack-mount PoE series Industrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+/Shared 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) Physical Port • 24 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector function • 4 100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with 100BASE-FX SFP • 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP • RJ45 to RS232 DB9 console interface for basic management and setup Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus/end- Advanced Layer 3 Manageable PoE Solution for Hardened Environment span PSE PLANET has launched two new PoE+ managed switches, namely the IGS-6325-24P4X • Up to 24 IEEE 802.3af devices powered Industrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed • Supports PoE power up to 36 watts for each PoE port Ethernet Switch and the IGS-6325-24P4S Industrial L3 24-Port 10/100/1000T • 440-watt PoE budget 802.3at PoE + 4-Port Shared 100/1000X SFP Managed Ethernet Switch. In the following sections, the term “IGS-6325 PoE Series” means the IGS-6325- • Auto detects powered device (PD) 24P4X and IGS-6325-24P4S. • Circuit protection prevents power interference between ports The IGS-6325 PoE Series features 24 10/100/1000BASE-T 802.3at PoE+ ports • Remote power feeding up to 100m with each port powering up to 36 watts, and 4 shared SFP ports and 4 10G SFP+ • PoE management features ports in a 1U case. It provides user-friendly yet advanced IPv6/IPv4 management – Total PoE power budget control interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic – Per port PoE function enable/disable routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve – PoE admin-mode control the rapid self-recovery capability and PLANET intelligent PoE functions for – PoE port power feeding priority controlling the PoE outdoor IP surveillance and wireless network applications. It is – Per PoE port power limit able to operate reliably, stably and quietly in the temperature range from -40 to 75 – PD classification detection • Intelligent PoE features degrees C. – Temperature threshold control – PoE usage threshold control – PD alive check – PoE schedule Industrial Protocol • Modbus TCP for real-time monitoring in the SCADA system • IEEE 1588v2 PTP (Precision Time Protocol) Industrial Case and Installation • IP30 metal case Layer 3 Routing Support • 19-inch rack-mountable design The IGS-6325 PoE Series enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the • Dual 48~56V DC, redundant power with reverse polarity IPv4 OSPFv2 ( Open Shortest Path First ) settings automatically. The OSPF is an protection interior dynamic routing protocol for autonomous system based on link state. The – Active-active redundant power failure protection protocol creates a database for link state by exchanging link states among Layer 3 – Backup of catastrophic power failure on one supply switches, and then uses the Shortest Path First algorithm to generate a route table – Fault tolerance and resilience based on that database.degrees C. 1

IGS-6325 Rack-mount PoE series Cybersecurity Network Solution to Minimize Security Risks • Supports EFT protection for 6KV DC power and 5KV DC The IGS-6325 PoE Series supports SSHv2, TLS and SSL protocols to provide strong protection against advanced threats. It includes a range of cybersecurity Ethernet ESD protection features such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, • -40 to 75 degrees C operating temperature 802.1x port-based and MAC-based network access control, RADIUS and Digital Input and Digital Output TACACS+ user accounts management, SNMPv3 authentication, and so on to • 2 digital input (DI) complement it as an all-security solution. • 2 digital output (DO) IGS-6325 Series • Integrate sensors into auto alarm system 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 • Transfer alarm to IP network via email and SNMP trap Computer Layer 2 Features • Prevents packet loss with back pressure (half-duplex) and SSL SNMPv3 SSH IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture, and Redundant Ring, Fast Recovery for Critical Network Applications runt/CRC filtering eliminates erroneous packets to optimize The IGS-6325 PoE Series supports redundant ring technology and features strong, the network bandwidth rapid self-recovery capability to prevent interruptions and external intrusions. • Storm Control support It incorporates advanced ITU-T G.8032 ERPS ( Ethernet Ring Protection – Broadcast/Multicast/Unicast Switching ) technology, Spanning Tree Protocol ( 802.1s MSTP), and redundant • Supports VLAN power input system into customer’s industrial automation network to enhance – IEEE 802.1Q tagged VLAN system reliability and uptime in harsh factory environments. In a simple Ring – Up to 256 VLANs groups, out of 4096 VLAN IDs network, the recovery time of data link can be as fast as 10ms. – Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) Control Center Office – Protocol-based VLAN 1000 – MAC-based VLAN – Voice VLAN MAN Switch – GVRP (GARP VLAN Registration Protocol) 8-Port MAN Switch • Supports Spanning Tree Protocol ERPS Ring for Metropolitan Area Network Application – IEEE 802.1D Spanning Tree Protocol (STP) Recovery Time < 10ms – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), 1000 1000 spanning tree by VLAN – BPDU Guard • Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) Industrial MAN Switch – Cisco ether-channel (static trunk) Factory – Maximum 14 trunk groups with 16 ports per trunk group – Up to 32Gbps bandwidth (duplex mode) High Power PoE for Security and Public Service Applications • Provides port mirror (many-to-1) As the whole system comes with a total 440-watt PoE budget, the IGS-6325 PoE • Port mirroring to monitor the incoming or outgoing traffic on Series is designed specifically to satisfy the growing demand of higher power a particular port consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) • Loop protection to avoid broadcast loops wireless LAN access points, PTZ (pan, tilt, zoom) speed dome network cameras and other PoE network devices. • Supports ERPS (Ethernet Ring Protection Switching) • Compatible with Cisco Uni-directional link Convenient and Smart ONVIF Devices with Detection Feature detection(UDLD) that monitors a link between two PLANET has newly developed an awesome feature -- ONVIF Support -- which switches and blocks the ports on both ends of the link if is specifically designed for co-operating with video IP surveillances. From the the link fails at any point between the two devices IGS-6325 PoE Series GUI, clients just need one click to search and show all of • Link Layer Discovery Protocol (LLDP) the ONVIF devices via network application. In addition, clients can upload floor images to the switch series, making the deployments of surveillance and other devices easy for planning and inspection purposes. Moreover, clients can get real- time surveillance’s information and online/offline status; the PoE reboot can be controlled from the GUI. 2

IGS-6325 Rack-mount PoE series Layer 3 IP Routing Features • Supports maximum 128 static routes and route summarization • IPv4 dynamic routing protocol supports OSPFv2 • IPv4/IPv6 hardware static routing • Routing interface provides per VLAN routing mode Quality of Service • Ingress Shaper and Egress Rate Limit per port bandwidth control • 8 priority queues on all switch ports • Traffic classification – IEEE 802.1p CoS – IP TOS/DSCP/IP precedence – IP TCP/UDP port number – Typical network application • Strict priority and Weighted Round Robin (WRR) CoS policies Intelligent Alive Check for Powered Device • Traffic-policing on the switch port The IGS-6325 PoE Series can be configured to monitor connected PD’s status in • DSCP remarking real time via ping action. Once the PD stops working and responding, the IGS- 6325 PoE Series will recycle the PoE port power and bring the PD back to work. Multicast It also greatly enhances the reliability in that the PoE port will reset the PD power, • Supports IPv4 IGMP snooping v1, v2 and v3 thus reducing administrator’s management burden. • Supports IPv6 MLD snooping v1 and v2 Step 1 Step 2 • Querier mode support PT PoE Camera No Response......PD Status • IPv4 IGMP snooping and port filtering Good!! Ping Request • IPv6 MLD snooping and port filtering Ping Request • MVR (Multicast VLAN Registration) Ping Echo Check alive status for 3 times Step 3 Step 4 Security Alarm Notification • Authentication PoE PD Alive!! PoE – IEEE 802.1x port-based / MAC-based network access ON OFF ON ON authentication Restart PoE device if without response – Built-in RADIUS client to co-operate with the RADIUS servers PoE Schedule for Energy Saving – TACACS+ login users access authentication Under the trend of energy saving worldwide and contributing to environmental – RADIUS / TACACS+ users access authentication protection on the Earth, the IGS-6325 PoE Series can effectively control the • Access Control List power supply besides its capability of giving high watts power. The built-in “PoE – IP-based Access Control List (ACL) schedule” function helps you to enable or disable PoE power feeding for each PoE – MAC-based Access Control List port during specified time intervals and it is a powerful function to help SMBs or • Source MAC / IP address binding enterprises save power and money. • DHCP Snooping to filter untrusted DHCP messages • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding 8 AM 5 PM 5 PM 8 AM • IP Source Guard prevents IP spoofing attacks • IP address access management to prevent unauthorized PoE PoE PoE PoE PoE PoE PoE PoE intruder Power Power Power Power Power Power Power Power On On On On Off Off Off On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Total Consumption of 36 watts/hr Save 24 watts / hr during off-business hours Total Saved = 10800watts / month PoE 1000BASE-TX UTP with PoE 3

IGS-6325 Rack-mount PoE series Scheduled Power Recycling The IGS-6325 PoE Series allows each of the connected PoE IP cameras or PoE Management wireless access points to reboot at a specific time each week. Therefore, it will • IPv4 and IPv6 dual stack management reduce the chance of IP camera or AP crash resulting from buffer overflow. • Switch Management Interfaces Automatically Reboot – Console/Telnet Command Line Interface S M T W T F S Every Friday 23:00 – Web switch management – SNMP v1 and v2c switch management CPU/Buffer Load 85% – SSH, TLS, SSL and SNMP v3 secure access • SNMP Management PoE CPU/Buffer – Four RMON groups (history, statistics, alarms, and Load 10% events) ON OFF ON – SNMP trap for interface Link Up and Link Down PoE PT Camera notification SMTP/SNMP Trap Event Alert • IPv6 IP address/NTP/DNS management The IGS-6325 PoE Series provides event alert function to help to diagnose • Built-in Trivial File Transfer Protocol (TFTP) client the abnormal device owing to whether or not there is a break of the network • BOOTP and DHCP for IP address assignment connection, or the rebooting response. • System Maintenance – Firmware upload/download via HTTP/TFTP Effective Alarm Alert for Better Protection – Reset button for system reboot or reset to factory default The IGS-6325 PoE Series supports a Fault Alarm feature which can alert the users – Dual Images when there is something wrong with the switches. With this ideal feature, the users • DHCP Relay and DHCP Option 82 would not have to waste time finding where the problem is. It will help to save time • DHCP Server and human resource. Fault Alarm Feature • User Privilege levels control • Network Time Protocol (NTP) • SFP-DDM (Digital Diagnostic Monitor) or • Network Diagnositc – ICMPv6/ICMPv4 Remote Ping SNMP – Cable diagnostic technology provides the mechanism to TRAP System DC Power Failure RJ45/Fiber Connection Mail Log detect and report potential cabling issues Link Down • PLANET Smart Discovery Utility for deployment Digital Input and Digital Output for External Alarm management The IGS-6325 PoE Series supports Digital Input and Digital Output on its front • SMTP/Syslog remote alarm panel. This external alarm enables users to use Digital Input to detect and log • System Log external device status (such as door intrusion detector), and send an event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-6325 PoE Series’ port shows link down, link up or power failure. Digital Input Security OK!! Alarm Warning Alarm Messaging I/O O I/ O I/ I/O I/O I/O I/O /O Enclosure Enclosure I SNMPTRAP Door Detector Door Detector Mail System (Door Closed) (Door Open) Log Digital Output I/O I/O I/O I/O Power Failure RJ45 Cable Link Down Fiber CableLink Down 4

IGS-6325 Rack-mount PoE series Robust Layer 2 Features The IGS-6325 PoE Series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-6325 PoE Series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-6325 PoE Series allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 14 trunk groups with 16 ports per trunk group, and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Powerful Security The IGS-6325 PoE Series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP Provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-6325 PoE Series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 1588 Precision Time Protocol for Industrial Computing Networks The IGS-6325 PoE Series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Time Synchronization in Network L3 Managed Switch Grand Master Clock Transparent Clock Slave Clock 1000 1000 1588 PTP 1588 PTP Base Station 1000 1000BASE-SX/LX Fiber-optic Flexible and Extendable 10Gb Ethernet Solution 10G Ethernet is a big leap in the evolution of Ethernet. Each of the 10G SFP+ slots in the IGS-6325-24P4X supports dual speed and 10GBASE-SR/LR or 1000BASE-SX/LX. With its 4-port, 10G Ethernet link capability and additional 4-port 1G Ethernet link capability, the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. The IGS-6325- 24P4X provides broad bandwidth and powerful processing capacity. 5

IGS-6325 Rack-mount PoE series Intelligent SFP Diagnosis Mechanism The IGS-6325 PoE Series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Digital Diagnostic Monitor (DDM) Voltage 6 4 8 2 10 Ammeter 0 12 30 V 20 40 10 50 0 60 mA Temperature 50 25 75 0 100 °C 0 -20 20 -40 40 -60 60 0 -20 20 dBm -40 40 -60 60 Power Transmitter dBm Power Receiver Applications Industrial Area Department/Workgroup PoE Switch Providing up to 24 PoE+, in-line power interfaces, the IGS-6325-24P4X can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 24 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-6325-24P4X makes the installation of IP cameras or wireless AP easier and more efficient. PoE+ PTZ Wireless AP VoIP Phone Speed Dome PoE PoE PoE Core Fiber Switch IGS-6325-24P4X/24P4S PoE |O|O| PoE 1000BASE-T UTP with PoE 1000BASE-T UTP |O|O| Serial Line (RS-XXX) Security Gate Serial Server Access Control PoE IP Camera 1000 1000BASE-SX/LX Fiber Optic 6

IGS-6325 Rack-mount PoE series Specifications Product IGS-6325-24P4X IGS-6325-24P4S Hardware Specifications Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 4 100/1000BASE-X SFP interfaces, shared with Port-21 to Port-24 SFP/mini-GBIC Slots Backward compatible with 100BASE-FX SFP transceiver 4 10GbBASE-SR/LR SFP+ interfaces (Port-25 to Port- SFP+ Slots 28) Backward compatible with 1000BASE-SX/LX/BX SFP N/A transceiver Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 128Gbps/non-blocking 48Gbps/non-blocking Throughput 95.2Mpps@64Bytes 35.7Mpps@64Bytes Address Table 16K entries, automatic source address learning and aging Shared Data Buffer 32M bits IEEE 802.3x pause frame for full duplex Flow Control Back pressure for half duplex Jumbo Frame 10K bytes < 5 sec: System reboot Reset Button > 5 sec: Factory default ESD Protection 5KV DC Enclosure IP30 metal case Fixed 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Connector Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC 2 Digital Input (DI): Level 0: -24~2.1V (±0.1V) DI and DO Level 1: 2.1V~24V (±0.1V) Max. input current: 10mA 2 Digital Output (DO): Open collector to 24VDC, 100mA System: DC1 (Green), DC2 (Green), Fault (Red) Ring (Green), R.O. (Green), DI/DO (Red) 10/100/1000T RJ45 PoE+ Interfaces (Port 1 to Port 24): PoE-in-Use (Amber) LNK/ACT (Green) LED Indicators 100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24): 1000Mbps LNK/ACT (Green) 100Mbps LNK/ACT (Amber) 1/10Gbps SFP+ Interfaces (Port 25 to Port 28) for IGS-6325-24P4X: 10Gbps LNK/ACT (Green) 1Gbps LNK/ACT (Amber) Dimensions (W x D x H) 440 x 300 x 44 mm, 1U height Weight 3800g 3740g Max. 33 watts/112.51 BTU Max. 33 watts/112.51 BTU (Power on without any connection) (Power on without any connection) Power Consumption Max. 540 watts/1841.13 BTU Max. 536 watts/1828.90 BTU (Full loading with PoE function) (Full loading with PoE function) Power Requirements Dual 48~56V DC (>53V DC for PoE+ output recommended), 11A Power Over Ethernet PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 52V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) 7

IGS-6325 Rack-mount PoE series 48V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 300W maximum (depending on power input) PoE Power Budget 52~56V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 440W maximum (depending on power input) * Dual power input must be the same as DC voltage, like dual 56V Max. Number of Class 2 PDs 24 Max. Number of Class 3 PDs 24 Max. Number of Class 4 PDs 16 Layer 3 Functions IP Interfaces Max. 128 VLAN interfaces Routing Table Max. 128 routing entries IPv4 hardware static routing Routing Protocols IPv6 hardware static routing IPv4 OSPFv2 dynamic routing Layer 2 Functions Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Port Configuration Flow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX / RX / Both Port Mirroring Many-to-1 monitor IEEE 802.1Q tag-based VLAN IEEE 802.1ad Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) GVRP (GARP VLAN Registration Protocol) Up to 256 VLAN groups, out of 4096 VLAN IDs IEEE 802.3ad LACP/static trunk Link Aggregation Supports 14 trunk groups with 16 ports per trunk group IEEE 802.1D Spanning Tree Protocol Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IPv4 IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Snooping IPv4 IGMP querier mode support IPv6 MLD (v1/v2) snooping, up to 255 multicast groups MLD Snooping IPv6 MLD querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 256 entries Per port bandwidth control Bandwidth Control Ingress: 10Kbps~13000Mbps Egress: 100Kbps~13000Mbps Management Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH, TLS, SSL, SNMP v3 IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 52V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) 8

IGS-6325 Rack-mount PoE series 48V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 300W maximum (depending on power input) PoE Power Budget 52~56V Power input - Single power input: 240W maximum (depending on power input) - Dual power input: 440W maximum (depending on power input) * Dual power input must be the same as DC voltage, like dual 56V Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEEE 802.3 10BASE-T IEEE 802.3af Power over Ethernet IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3at Power over Ethernet Plus IEEE 802.3z Gigabit SX/LX IEEE 1588 PTPv2 IEEE 802.3ab Gigabit 1000T RFC 768 UDP IEEE 802.3ae 10Gigabit Ethernet RFC 793 TFTP IEEE 802.3x flow control and back pressure RFC 791 IP IEEE 802.3ad port trunk with LACP RFC 792 ICMP Standards Compliance IEEE 802.1D Spanning Tree Protocol RFC 2068 HTTP IEEE 802.1w Rapid Spanning Tree Protocol RFC 1112 IGMP v1 IEEE 802.1s Multiple Spanning Tree Protocol RFC 2236 IGMP v2 IEEE 802.1p Class of Service RFC 3376 IGMP version 3 IEEE 802.1Q VLAN tagging RFC 2710 MLD version 1 IEEE 802.1ad Q-in-Q VLAN stacking FRC 3810 MLD version 2 IEEE 802.1X Port Authentication Network Control ITU G.8032 ERPS Ring Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Drawing IGS-6325-24P4X 443.70 481.70 468.70 4.00 DC Input: 48-56V , 11A DC POWER LNK/ACT 2 4 6 8 10 12 14 16 18 20 22 24 22 24 26 28 DC 1 Fault DC 2 ON PoE-in-Use + + CAUTION Please refer to user’s manual before IGS-6325-24P4X connect the DC wire. 1000 10G Console DIDO Fault 1000 100 R.O. DC2 OFF Ring DC1 Reset DI 0 DI 1 DO 0 DO 1 GND GND 1 3 5 7 9 11 13 15 17 19 21 23 21 22 23 24 25 26 27 28 115200, N, 8, 1 19.00 9 44.00 7.00 301.50 30.20 42.60

IGS-6325 Rack-mount PoE series IGS-6325-24P4S 443.70 481.70 468.70 4.00 DC Input: 48-56V , 11A DC POWER LNK/ACT 2 4 6 8 10 12 14 16 18 20 22 24 22 24 DC 1 Fault DC 2 ON PoE-in-Use + + CAUTION Please refer to user’s manual before IGS-6325-24P4S connect the DC wire. Console DIDO Fault R.O. DC2 1000 OFF Ring DC1 100 Reset DI 0 DI 1 DO 0 DO 1 GND GND 1 3 5 7 9 11 13 15 17 19 21 23 21 22 23 24 115200, N, 8, 1 19.00 Ordering Information Industrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Ethernet Switch IGS-6325-24P4X (-40~75 degrees C ) Industrial L3 24-Port 10/100/1000T 802.3at PoE + 4-Port Shared 100/1000X SFP Managed Ethernet Switch IGS-6325-24P4S (-40~75 degrees C) Related Products Industrial L2+ 20-Port 10/100/1000T + 4-Port TP/SFP Combo + 2-Port 10G SFP+ Managed Ethernet Switch IGS-6325-20T4C4X (-40~75 degrees C) IGS-6325-20S4C4X Industrial L3 20-Port 100/1000X SFP + 4-Port Gigabit TP/SFP + 4-Port 10G SFP+ Managed Ethernet Switch IGS-6325-16P4S L3 Industrial 16-Port 10/100/1000T 802.3at PoE + 4-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) CB-DASFP-0.5/2M 10G SFP+ Directly-attached Copper Cable (0.5/2M in length) MTB-Series Module 10GBASE-LR/SR/BX/T Modules MGB-Series Transceiver 1000BASE-SX/LX SFP Transceiver MFB-Series Transceiver 100BASE-FX SFP Transceiver PWR-120-48/PWR-240-48/PWR-480-48/ DC Single Output Industrial DIN Rail Power Supply Units PWR-75-48 PLANET Technology Corporation IGS-6325 Rack-mount PoE series 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2019 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10 44.00 7.00 301.50 30.20 42.60