産業用PoEスイッチPLANET IGS-5227-4MP2MT

IGS-5227-4MP2MT Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C, 24V) Physical Port • 6-port 10/100/1000BASE-T waterproof and dustproof M12 connectors with 4-port IEEE 802.3at/af Power over Ethernet Injector function Hardware Conformance • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE • Complies with IEEE 802.3af Power over Ethernet end-span PSE • Up to 4 ports of IEEE 802.3at/802.3af devices powered Suitable for Industrial Environment • Supports PoE Power up to 36 watts for each PoE port PLANET IGS-5227-4MP2MT, an Industrial Layer 2+ Managed Ethernet Switch, • Auto detects powered device (PD) comes with an IP67-rated industrial case, 4-port 10/100/1000T 802.3at PoE+, 2-port • Circuit protection prevents power interference between ports 10/100/1000T, and static Layer 3 routing, providing a high level of immunity against • Remote power feeding up to 100 meters electromagnetic interference and heavy electrical surges which are usually found on • PoE Management plant floors or in curb-side traffic control cabinets. The IGS-5227-4MP2MT can be easily – Total PoE power budget control mounted on a DIN rail or wall taking up less space. Each of the four Gigabit PoE+ ports – Per port PoE function enable/disable provides 36 watts of power, which means a total power budget of up to 144 watts can – PoE Port Power feeding priority be utilized simultaneously without considering the different types of PoE applications – Per PoE port power limitation being employed. It also provides a quick, safe and cost-effective Power over Ethernet – PD classification detection – PD alive check network solution to IP security surveillance for small businesses and enterprises. – PoE schedule – PD scheduled power recycling IP67 Rugged Case • IP67-rated aluminum case • Redundant power design – 24 to 48V DC, redundant power with reverse polarity 2 x Waterproof Gigabit M12 protection – Active-active redundant power failure protection 4 x Waterproof Gigabit PoE+ M12 – Backup of catastrophic power failure on one supply – Fault tolerance and resilience • DIN-rail and wall-mount design 24~48V DC Waterproof • Supports 6000V DC Ethernet ESD protection Redundant Power Input • -40 to 75 degrees C operating temperature Layer 3 IP Routing Features Waterproof and Dustproof M12 Ethernet Connector • Supports maximum 32 static routes and route summarization The IGS-5227-4MP2MT is equipped with a 6-port 10/100/1000BASE-T auto-negotiation Layer 2 Features dustproof M12 connector with 4-port IEEE 802.3at PoE+ (Port 3 to Port 6); each • Prevents packet loss with back pressure (half-duplex) and IEEE PoE port provides 36 watts PoE output. The M12 connector provides tight and strong 802.3x pause frame flow control (full-duplex) connection, and guarantees stable Ethernet operation performance under high vibration • High performance of Store-and-Forward architecture, and runt/ and shock environment. It comes with the industrial protection rating of IP67 capable CRC filtering that eliminates erroneous packets to optimize the of withstanding humidity, dirt, dust, shock, vibrations, heat and cold. The IGS-5227- network bandwidth 4MP2MT is able to operate under the temperature range from -40 to 75 degrees C. All • Storm control support these features ensure the highest level of reliability for mission-critical applications in any – Broadcast/Multicast/Unicast difficult environment. • Supports VLAN 1

IGS-5227-4MP2MT – IEEE 802.1Q tagged VLAN – Up to 255 VLANs groups, out of 4095 VLAN IDs – Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) – Protocol-based VLAN – MAC-based VLAN – IP subnet-based VLAN – Voice VLAN • Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) Dual Power Input for High Availability Network System – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) The IGS-5227-4MP2MT features a strong dual power input system (Dual 24V~48V – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), DC) incorporated into customer’s automation network to enhance system reliability and spanning tree by VLAN uptime. For example, when DC Power 1 fails to work, the hardware failover function will – BPDU Guard be activated automatically to keep powering the IGS-5227-4MP2MT via DC Power 2 • Supports Link Aggregation alternatively without any loss of operation. – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) Convenient and Reliable Power System – Maximum 3 trunk groups, with 2 ports for each trunk To facilitate the 802.3at High Power PoE usage with the commonly used 24~48V DC power – Up to 4Gbps bandwidth (full duplex mode) input in transportation and industrial-level applications, the IGS-5227-4MP2MT adopts • Provides port mirror (many-to-1) 24~48V DC to 51V DC power boost technology to solve power source issue which is not • Port mirroring monitors the incoming or outgoing traffic on a required for special power supplies to achieve the level of High Power PoE+ output. To particular port • Loop protection to avoid broadcast loops enhance the operation reliability and flexibility, the IGS-5227-4MP2MT is equipped with two • Supports ITU-T G.8032 ERPS (Ethernet Ring Protection DC power input connectors for redundant power supply installation. Switching) Quality of Service • Ingress shaper and egress rate limit per port bandwidth control • 8 priority queues on all switch ports • Traffic classification 51V DC PoE 802.3af/802.3at – IEEE 802.1p CoS PoE Compliant PD Device 10/100/1000BASE-T – ToS/DSCP/IP precedence of IPv4/IPv6 packets – IP TCP/UDP port number – Typical network application 24~48V DC • Strict priority and Weighted Round Robin (WRR) CoS policies Redundant Power Input • Traffic-policing policies on the switch port • DSCP remarking 24~48V DC to 51V DC PoE Power Boost Multicast 10/100/1000Mbps Ethernet Data Rate • Supports IGMP snooping v1, v2 and v3 • Supports MLD snooping v1 and v2 • Querier mode support Centralized Power Management for Gigabit Ethernet PoE Networking • IGMP snooping port filtering To fulfill the needs of higher power required PoE network applications with Gigabit speed • MLD snooping port filtering transmission, the IGS-5227-4MP2MT features high-performance Gigabit IEEE 802.3at PoE+ • MVR (Multicast VLAN Registration) (up to 36 watts) on all ports. It perfectly meets the power requirements of PoE VoIP phone, Security PoE Wireless AP and all kinds of PoE IP cameras such as IR, PTZ, speed dome cameras • Authentication and even box type IP cameras with a built-in fan and heater for high power consumption. – IEEE 802.1x port-based/MAC-based network access The IGS-5227-4MP2MT’s PoE capabilities also help to reduce deployment costs for network authentication devices as a result of freeing from restrictions of power outlet locations. Power and data – IEEE 802.1x authentication with guest VLAN switching are integrated into one unit, delivered over a single cable and managed centrally. – Built-in RADIUS client to cooperate with the RADIUS It thus eliminates cost for additional AC wiring and reduces installation time. servers 2

IGS-5227-4MP2MT Built-in Unique PoE Functions for Surveillance Management As a managed PoE Switch for surveillance network, the IGS-5227-4MP2MT features the following intelligent PoE management functions: – RADIUS/TACACS+ users access authentication ■ PD Alive Check • Access Control List ■ Scheduled Power Recycling – IP-based Access Control List (ACL) ■ SMTP/SNMP Trap Event Alert – MAC-based Access Control List (ACL) • Source MAC/IP address binding ■ PoE Schedule • DHCP Snooping to filter distrusted DHCP messages Intelligent Powered Device Alive Check • Dynamic ARP Inspection discards ARP packets with invalid The IGS-5227-4MP2MT can be configured to monitor a connected PD (Powered Device) MAC address to IP address binding • IP Source Guard prevents IP spoofing attacks status in real time via ping action. Once the PD stops working and it is without response, • IP address access management to prevent unauthorized the IGS-5227-4MP2MT will resume the PoE port power and bring the PD back to work. It intruder will greatly enhance the network reliability through the PoE port resetting the PD’s power Management source, thus reducing administrator management burden. • IPv4 and IPv6 dual stack management • Switch Management Interfaces Step 1 Step 2 – Telnet command line interface No Response...... PD Status PT PoE Camera – Web switch management Good!! – SNMP v1, v2c, and v3 switch management Ping Request – SSH/SSL secure access Ping Request Ping Echo • IPv6 address/NTP managementCheck alive status for 3 times • Built-in Trivial File Transfer Protocol (TFTP) client Step 3 Step 4 • BOOTP and DHCP for IP address assignment Alarm Notification PoE PD Alive!! • System Maintenance PoE – Firmware upload/download via HTTP/TFTP ON OFF ON ON – Dual images Restart PoE device if without response • DHCP relay and option 82 • User privilege levels control • NTP (Network Time Protocol) Scheduled Power Recycling • Link Layer Discovery Protocol (LLDP) and LLDP-MED The IGS-5227-4MP2MT allows each of the connected PDs to reboot at a specified time • Network diagnostic each week. Therefore, it will reduce the chance of PD crash resulting from buffer overflow. – Cable diagnostic technology provides the mechanism to detect – ICMPv6/ICMPv4 remote ping • SMTP/Syslog remote alarmAutomatically Reboot • Four RMON groups (history, statistics, alarms and events) S M T W T F S Every Friday 23:00 • SNMP trap for interface link up and link down notification CPU/Buffer • System Log Load 85% • PLANET Smart Discovery Utility for deployment management PoE CPU/Buffer Load 10% ON OFF ON PoE PT Camera SMTP/SNMP Trap Event Alert Though most NVR or camera management software offers SMTP email alert function, the IGS-5227-4MP2MT further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by the PD Alive Check process. 3

IGS-5227-4MP2MT SMTP/SNMP Trap Event Alert IGS-5227-4MP2MT E-mail Alert Malfunction PoE PoE IP Camera IP Camera PoE Schedule for Energy Saving Besides being used for IP surveillance, the IGS-5227-4MP2MT is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the IGS-5227-4MP2MT can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget. 8AM 5PM 5PM 8AM PoE PoE PoE PoE PoE PoE PoE PoE Power Power Power Power Power Power Power Power Off Off Off On On On On On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Save 24 watts/hr during off-business hours Total consumption of 36 watts/hr Total Saved = 10800 Watts/month PoE 1000Base-T UTP with PoE Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5227-4MP2MT supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain simple Ring network, the recovery time of data link can be as fast as 20ms. OfficeFactory 1000 Industrial MAN Switch Industrial 10G Switch 1000 E.R.P.S. Ring for Metropolitan Area Network Application Recovery Time < 50ms PoE PoE PoE PoE 8-Port MAN Switch IGS-5227-4MP2MT Control Center Highway 4

IGS-5227-4MP2MT IPv6/IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the IGS-5227-4MP2MT helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management The IGS-5227-4MP2MT not only provides ultra high transmission performance, and excellent Layer 2 and Layer 4 technologies, but also Layer 3 IPv4/IPv6 VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed and simple networking application. Robust Layer 2 Features The IGS-5227-4MP2MT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. Via the link aggregation of supporting ports, the IGS-5227-4MP2MT allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Powerful Security The IGS-5227-4MP2MT offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x port-based and MAC-based user, and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The IGS-5227-4MP2MT also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Excellent Traffic Control The IGS-5227-4MP2MT is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission. Efficient and Secure Management With built-in Web-based management interface, the IGS-5227-4MP2MT L2+ Managed Switch offers an easy-to-use, platform-independent configuration facility which includes Web and SNMP management interfaces. For reducing product learning time, it offers Cisco-like command via Telnet and customer does not need to learn new console command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. IGS-5227-4MP2MT 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH 1588 Time Protocol for Industrial Computing Networks The IGS-5227 series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Modbus TCP provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-5227 series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enable administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 5

IGS-5227-4MP2MT Applications High Availability Networking Solution for Surveillance System The IGS-5227-4MP2MT’s strong, rapid, self-recovery capability helps to prevent network interruptions and external intrusions. Customer’s automation network is integrated with ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) so as to enhance system reliability and uptime. The IGS-5227-4MP2MT is the ideal solution for surveillance system to build redundant connection and establish high bandwidth for the public and railway transmission system. Control Center IGS-5227-4MP2MT IGS-5227-4MP2MT IGS-5227-4MP2MT Dual Band AP Dual Band AP PoE ERPS Ring PoE Recovery time <50 ms PoE PoE IP Camera IP Camera Railway Platform PoE 100BASE-TX UTP with PoE 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Layer 3 VLAN Routing and PoE Application With the built-in, robust Layer 3 routing protocols, the IGS-5227-4MP2MT ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 32 routing entries. The IGS-5227-4MP2MT, certainly an ideal solution for industries, offers greater security, control and bandwidth conservation, and high-speed uplink. Railway Transmission System Passenger Information System PoE IP Camera Entertainment System Next Stop PoE PoE Laptop N N AP Content Server PoE IGS-5227-4MP2MT IGS-5227-4MP2MT Control Center IGS-5227-4MP2MT IGS-5227-4MP2MT PoE IP Camera PoE IP Camera PoE PoE Industrial Backbone Switch PC VoIP 1000BASE-T UTPPC AP PoE 1000BASE-T UTP with PoE 6

IGS-5227-4MP2MT IP Surveillance Domain Wireless AP Domain 192.168.10.x/24 Industrial IP67-rated 192.168.20.x/24 PoE Ethernet Switch NVR PoE PoE PoE PoE IGS-5227-4MP2MT PoE IP Camera Dual Band Wireless AP PoE 100BASE-TX UTP with PoE 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Specifications Model IGS-5227-4MP2MT Hardware Specifications Copper Ports 6 x M12, 8-pin A-coded female connector, 10/100/1000BASE-T auto-MDI/MDI-X ports Power Connector 1 x M23, 5-pin A-coded male connector Switch Architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput 8.9Mpps@64bytes Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4M bits Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex Jumbo Frame 9K bytes Dimensions (W x D x H) 103 x 68.2 x 163 mm Weight 1155g Enclosure IP67 aluminum case Installation Wall-mount kit and DIN-rail kit System: PWR1 (Green), PWR2 (Green), Fault ( Red ) Ring (Green), R.O. (Green) LED 10/100/1000T RJ45 Interfaces (Port 1 to Port 2):LNK/ACT (Green) 10/100/1000T RJ45 Interfaces (Port 3 to Port 6): LNK/ACT (Green) PoE-in-Use (Orange) Power Consumption Max. 155 watts/528.89 BTU Power Requirements Dual 24~48V DC ESD Protection 6KV DC Power over Ethernet PoE Standard IEEE 802.3at/802.3af PoE/PSE PoE Power Supply Type End-span PoE Power Output Per port 51V DC, 350mA; max. 15.4 watts (IEEE 802.3af)Per port 51V DC, 590mA; max. 36 watts (IEEE 802.3at) 7

IGS-5227-4MP2MT Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 144 watts max. (depending on power input) PD @ 7 watts: 4 units PoE Ability PD @ 15.4 watts: 4 units PD @ 30.8 watts: 4 units Layer 2 Management Functions Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status Port Mirroring TX/RX/BothMany-to-1 monitor 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs Link Aggregation IEEE 802.3ad LACP/static trunk3 groups with 2 ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Traffic classification based strict priority and WRR 8-level priority for switching: QoS - Port number- 802.1p priority - 802.1Q VLAN tagging - DSCP/ToS field in IP packet IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groupsIGMP querier mode support MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groupsMLD querier mode support Per port bandwidth control Bandwidth Control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps Access Control List IP-based ACL/MAC-based ACLUp to 256 entries Layer 3 Functions IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries Routing Protocols IPv4 software static routingIPv6 software static routing Management Basic Management Interfaces Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSH/SSL, SNMP v3 RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB SNMP MIBs RFC 2618 RADIUS Client MIBRFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) 8

IGS-5227-4MP2MT Railway Traffic EN50155 IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP Standards Compliance IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) Environment Operating Temperature: -40 ~ 75 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -40 ~ 80 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Standard Accessories 1 x 8-pin A-coded M12-to-RJ45 UTP Cable (2m) 1 x Wall-mount Kit 1 x DIN-rail Kit Packet Contents 1 x Quick Installation Guide 6 x M12 Female Dust Cap 1 x M23 Power Waterproof Cap M23 5-pin A-coded female connector power cable (Not included in the packet) Drawing Top View Mounting Kit Side View Front View Side View Rear View LNK/ACT 1 2 LNK ACT LNK/ACT 3 4 PoE LNK/ACT 5 6 PoE GND INPUT DC 24-48V V2 V1 Pin Con V2 V1 1 DA+ 2 DA FAULT 2 1 3 DB+4 DC+ 3 7 5 DC PWR 2 R.O. 4 6 6 DB7 DD+ 5 8 8 DD PWR 1 Ring PoE IP67 Mgt. IGS-5227-4MP2MT Mounting Kit Bottom View Dimensions ( unit = mm ) 9

IGS-5227-4MP2MT Ordering Information IGS-5227-4MP2MT Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C, 24V) Related Products IGS-604HPT-RJ Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IGS-604HPT-M12 Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IGS-5227-6MT-X Industrial IP67-rated 6-Port 10/100/1000T M12 Managed Ethernet Switch (-40~75 degrees C) ISW-800T-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch (-40~75 degrees C) ISW-804PT-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch with 4-Port PoE (-40~75 degrees C) POE-E101 IEEE 802.3af Power over Ethernet Extender POE-E201 IEEE 802.3at Power over Ethernet Extender Related Products CB-M12A8MRJ-200 8-pin A-coded M12 Male to RJ45 Ethernet Cable (2 meters) CB-M23F5F-120 5-pin M23 Female to bare end power cable (1.2 meters) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IGS-5227-4MP2MT Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10