産業用PoEスイッチ PLANET IGS-5226-4P2T

IGS-5226-4P2T Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch(-40~75 degrees C) Physical Port • 6-port 10/100/1000BASE-T dustproof RJ45 copper with 4-port IEEE 802.3at/af Power over Ethernet Injector function Hardware Conformance • Complies with IEEE 802.3at Power over Ethernet Plus end- span PSE • Complies with IEEE 802.3af Power over Ethernet end-span PSE • Up to 4 ports of IEEE 802.3af/802.3at devices powered • Supports PoE Power up to 36 watts for each PoE port • Auto detects powered device (PD) • Circuit protection prevents power interference between ports Suitable for Industrial Environment • Remote power feeding up to 100 meters PLANET IGS-5226-4P2T, an Industrial Layer 2+ Managed Ethernet Switch, comes with • PoE Management an IP50-rated industrial case, 4-port 10/100/1000T 802.3at PoE, 2-port 10/100/1000T, – Total PoE power budget control and static Layer 3 routing, providing a high level of immunity against electromagnetic – Per port PoE function enable/disable interference and heavy electrical surges which are usually found on plant floors or – PoE Port Power feeding priority in curb-side traffic control cabinets. The IGS-5226-4P2T can be easily mounted on a – Per PoE port power limitation DIN rail or wall taking up less space. Each of the four Gigabit PoE+ ports provides – PD classification detection – PD alive check 36 watts of power, which means a total power budget of up to 144 watts can be – PoE schedule utilized simultaneously without considering the different types of PoE applications being – PD scheduled power recycling employed. It also provides a quick, safe and cost-effective Power over Ethernet network • IP50-rated metal case solution to IP security surveillance for small businesses and enterprises. • Redundant power design – 48 to 56V DC, redundant power with polarity reverse protect function – Active-active redundant power failure protection IP50 Rugged Case – Backup of catastrophic power failure on one supply – Fault tolerance and resilience • DIN-rail and wall-mount design • Supports 6000V DC Ethernet ESD protection 2 x Waterproof Gigabit RJ45 • -40 to 75 degrees C operating temperature Layer 3 IP Routing Features 4 x Waterproof Gigabit PoE+ RJ45 • Supports maximum 32 static routes and route summarization Layer 2 Features 48~56V DC Waterproof M12 Redundant Power Input • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture, and runt/ CRC filtering that eliminates erroneous packets to optimize the network bandwidth 1

IGS-5226-4P2T Dustproof RJ45 Ethernet Connector and Shielded Plug The IGS-5226-4P2T is equipped with a 6-port 10/100/1000BASE-T auto-negotiation • Storm control support dustproof RJ45 connector with 4-port IEEE 802.3at PoE+ (Port 3 to Port 6); each PoE port – Broadcast/Multicast/Unicast provides 36-watt PoE output. These shielded RJ45 plugs can make the general UTP cable • Supports VLAN dustproof. When connected to the dustproof RJ45 connector, it provides tight and strong • IEEE 802.1Q tagged VLAN connection, and ensures it comes with the industrial protection rating of IP50 capable of – Up to 255 VLANs groups, out of 4095 VLAN IDs withstanding humidity, dirt, dust, shock, vibrations, heat and cold. – Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) – Protocol-based VLAN – MAC-based VLAN – IP subnet-based VLAN – Voice VLAN • Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard Environmentally Hardened Design • Supports Link Aggregation The IGS-5226-4P2T is able to protect itself from dust ingress, and to operate under the – 802.3ad Link Aggregation Control Protocol (LACP) temperature range from -40 to 75 degrees C. All these features ensure the highest level – Cisco ether-channel (static trunk) of reliability for mission-critical applications in any difficult environment. – Maximum 3 trunk groups, with 2 ports for each trunk – Up to 4Gbps bandwidth (full duplex mode) • Provides port mirror (many-to-1) • Port mirroring monitors the incoming or outgoing traffic on a particular port • Loop protection to avoid broadcast loops • Supports E.R.P.S. (Ethernet Ring Protection Switching) • IEEE 1588 and Synchronous Ethernet network timing Quality of Service • Ingress shaper and egress rate limit per port bandwidth control Dual Power Input for High Availability Network System • 8 priority queues on all switch ports • Traffic classification The IGS-5226-4P2T features a strong dual power input system (Dual 48V~56V DC) – IEEE 802.1p CoS incorporated into customer’s automation network to enhance system reliability and uptime. – ToS/DSCP/IP precedence of IPv4/IPv6 packets For example, when DC Power 1 fails to work, the hardware failover function will be – IP TCP/UDP port number activated automatically to keep powering the IGS-5226-4P2T via DC Power 2 alternatively – Typical network application without any loss of operation. • Strict priority and Weighted Round Robin (WRR) CoS policies • Traffic-policing policies on the switch port Centralized Power Management for Gigabit Ethernet PoE Networking • DSCP remarking To fulfill the needs of higher power required PoE network applications with Gigabit speed transmission, the IGS-5226-4P2T features high-performance Gigabit IEEE 802.3at PoE+ Multicast (up to 36 watts) on all ports. It perfectly meets the power requirements of PoE VoIP • Supports IGMP snooping v1, v2 and v3 phone, PoE Wireless AP and all kinds of PoE IP cameras such as IR, PTZ, speed dome • Supports MLD snooping v1 and v2 cameras and even box type IP cameras with a built-in fan and heater for high power • Querier mode support consumption. The IGS-5226-4P2T’s PoE capabilities also help to reduce deployment • IGMP snooping port filtering • MLD snooping port filtering costs for network devices as a result of freeing from restrictions of power outlet locations. • MVR (Multicast VLAN Registration) Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates cost for additional AC wiring and reduces installation time. 2

IGS-5226-4P2T Built-in Unique PoE Functions for Surveillance Management As a managed PoE Switch for surveillance network, the IGS-5226-4P2T features the following intelligent PoE management functions: Security • PD Alive Check • Authentication • Scheduled Power Recycling – IEEE 802.1x port-based/MAC-based network access • SMTP/SNMP Trap Event Alert authentication • PoE Schedule – IEEE 802.1x authentication with guest VLAN – Built-in RADIUS client to cooperate with the RADIUS Intelligent Powered Device Alive Check servers The IGS-5226-4P2T can be configured to monitor a connected PD (Powered Device) status – RADIUS/TACACS+ users access authentication in real time via ping action. Once the PD stops working and it is without response, the IGS- • Access Control List 5226-4P2T will resume the PoE port power and bring the PD back to work. It will greatly – IP-based Access Control List (ACL) – MAC-based Access Control List (ACL) enhance the network reliability through the PoE port resetting the PD’s power source, thus • Source MAC/IP address binding reducing administrator management burden. • DHCP Snooping to filter distrusted DHCP messages • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding Step 1 Step 2 • IP Source Guard prevents IP spoofing attacks PT PoE Camera No Response...... • IP address access management to prevent unauthorized PD Status Good!! intruder Ping Request Ping Request Management Ping Echo Check alive status for 3 times • IPv4 and IPv6 dual stack management Step 3 Step 4 • Switch Management Interfaces Alarm Notification PD Alive!! – Telnet command line interface PoE PoE – Web switch management ON OFF ON ON – SNMP v1, v2c, and v3 switch management – SSH/SSL secure access Restart PoE device if without response • IPv6 address/NTP management • Built-in Trivial File Transfer Protocol (TFTP) client Scheduled Power Recycling • BOOTP and DHCP for IP address assignment The IGS-5226-4P2T allows each of the connected PDs to reboot at a specified time each • System Maintenance – Firmware upload/download via HTTP/TFTP week. Therefore, it will reduce the chance of PD crash resulting from buffer overflow. – Reset button for system reboot or reset to factory default – Dual images Automatically Reboot • DHCP relay and option 82 Every Friday 23:00 • User privilege levels controlS M T W T F S • NTP (Network Time Protocol) CPU/Buffer • Link Layer Discovery Protocol (LLDP) and LLDP-MED Load 85% • Network diagnostic – Cable diagnostic technology provides the mechanism to PoE CPU/Buffer detect and report potential cabling issues Load 10% – ICMPv6/ICMPv4 remote ping • SMTP/Syslog remote alarm ON OFF ON PoE PT Camera • Four RMON groups (history, statistics, alarms and events) • SNMP trap for interface link up and link down notification • System Log SMTP/SNMP Trap Event Alert • PLANET Smart Discovery Utility for deployment management Though most NVR or camera management software offers SMTP email alert function, the IGS-5226-4P2T further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, loss of PoE power or the rebooting response by the PD Alive Check process. 3

IGS-5226-4P2T SMTP/SNMP Trap Event Alert IGS-5226-4P2T E-mail Alert Malfunction PoE PoE IP Camera IP Camera PoE Schedule for Energy Saving Besides being used for IP surveillance, the IGS-5226-4P2T is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the IGS-5226-4P2T can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget. 8AM 5PM 5PM 8AM PoE PoE PoE PoE PoE PoE PoE PoE Power Power Power Power Power Power Power Power Off Off Off On On On On On 6 Watts 6 Watts 12 Watts 12 Watts 6 Watts 6 Watts 12 Watts 12 Watts Save 24 watts/hr during off-business hours Total consumption of 36 watts/hr Total Saved = 10800 Watts/month PoE 1000Base-T UTP with PoE Redundant Ring, Fast Recovery for Critical Network Applications The IGS-5226-4P2T supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain, simple Ring network, the recovery time of data link can be as fast as 20ms. Office Factory 1000 Industrial MAN Switch Industrial 10G Switch 1000 E.R.P.S. Ring for Metropolitan Area Network Application Recovery Time < 50ms PoE PoE 8-Port MAN Switch IGS-5226-4P2T Control Center Highway 4

IGS-5226-4P2T IPv6/IPv4 Dual Stack Supporting both IPv6 and IPv4 protocols, the IGS-5226-4P2T helps data centers, campuses, telecoms, and more to experience the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible Management The IGS-5226-4P2T not only provides ultra high transmission performance, and excellent Layer 2 and Layer 4 technologies, but also layer 3 IPv4/IPv6 VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed and simple networking application. Robust Layer 2 Features The IGS-5226-4P2T can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and IGMP/MLD Snooping. Via the link aggregation of supporting ports, the IGS-5226-4P2T allows the operation of a high-speed trunk to combine with multiple fiber ports and supports fail-over as well. MSTP LACP Q-in-Q QoS LLDP MLD IGMP L2/L4 L2/L4 Managed Switch Managed Switch Powerful Security The IGS-5226-4P2T offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user, and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The IGS-5226-4P2T also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Excellent Traffic Control The IGS-5226-4P2T is loaded with powerful traffic management and QoS features to enhance connection services by telecoms and ISPs. The QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limit that are particularly useful for multi-tenant units, multi-business units, Telco and network service providers’ applications. It also empowers the industrial environment to take full advantage of the limited network resources and guarantees the best performance in VoIP and video conferencing transmission. Efficient and Secure Management With built-in Web-based management interface, the IGS-5226-4P2T L2+ Managed Switch offers an easy-to-use, platform-independent management and configuration facility which includes Web and SNMP management interfaces. The SNMP can be managed via any management software based on the standard of SNMP Protocol. For reducing product learning time, it offers Cisco-like command via Telnet and customer does not need to learn new console command. Moreover, it also offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session. IGS-5226-4P2T 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SNMPv3 SSH 5

IGS-5226-4P2T Applications High Availability Networking Solution for Surveillance System The IGS-5226-4P2T features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) into customer’s automation network to enhance system reliability and uptime. The IGS-5226-4P2T is the ideal solution for surveillance system to build redundant connection and establish high bandwidth for public transmission system and railway transmission. Control Center IGS-5226-4P2T IGS-5226-4P2T IGS-5226-4P2T Dual Band AP Dual Band AP PoE ERPS Ring PoE Recovery time <50 ms PoE PoE IP Camera IP Camera Railway Platform PoE 100BASE-TX UTP with PoE 1000BASE-T UTP PoE 1000BASE-T UTP with PoE Layer 3 VLAN Routing and PoE Application With the built-in, robust Layer 3 routing protocols, the IGS-5226-4P2T ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 32 routing entries. The IGS-5226-4P2T, certainly an ideal solution for industries, offers greater security, control and bandwidth conservation, and high-speed uplink. Railway Transmission System IP Surveillance Domain Wireless AP Domain Passenger Information System PoE IP Camera Entertainment 192.168.10.x/24 System Industrial IP50-rated 192.168.20.x/24 Next Stop PoE PoE Ethernet Switch PoE Laptop N N NVR AP Content IGS-5226-4P2T Server PoE PoE PoE PoE PoE IGS-5226-4P2T IGS-5226-4P2T PoE IP Camera Dual Band Wireless AP Control Center IGS-5226-4P2T PoE 100BASE-TX UTP with PoE IGS-5226-4P2T PoE IP Camera PoE IP Camera 1000BASE-T UTP PoE PoE 1000BASE-T UTP with PoE PoE Industrial Backbone Switch PoE 100BASE-TX UTP PC VoIP PoE 100BASE-TX UTP with PoEPC AP 1000BASE-T UTP PoE 1000BASE-T UTP with PoE 6

IGS-5226-4P2T Product Specifications Product IGS-5226-4P2T Hardware Specifications Copper Ports 6 10/100/1000BASE-T dustproof RJ45 auto-MDI/MDI-X ports PoE Injector Port 4 ports with 802.3at/af PoE injector function (Port-3 to Port-6) Power Connector 1 x M12, 5-pin A-Coded male connector Switch Architecture Store-and-Forward Switch Fabric 12Gbps/non-blocking Throughput 8.9Mpps@64bytes Address Table 8K entries, automatic source address learning and aging Shared Data Buffer 4M bits Flow Control IEEE 802.3x pause frame for full-duplexBack pressure for half-duplex Jumbo Frame 9K bytes Reset Button < 5 sec: System reboot> 5 sec: Factory default Dimensions (W x D x H) 132 x 75 x 160 mm Weight 809g Enclosure IP50 metal case Installation Wall-mount and DIN rail kit System: PWR1 (Green), PWR2 (Green), Fault (Red) Ring (Green), R.O. (Green) LED 10/100/1000T RJ45 Interfaces (Port 1 to Port 2): LNK/ACT (Green) 10/100/1000T RJ45 Interfaces (Port 3 to Port 6): LNK/ACT (Green) PoE-in-Use (Orange) Power Consumption Max. 165.3 watts/563.67 BTU Power Requirements Dual 48~56V DC (>53V DC for PoE+ output recommended) ESD Protection 6KV DC Power over Ethernet PoE Standard IEEE 802.3af/802.3at PoE/PSE PoE Power Supply Type End-span IEEE 802.3af Standard - Per port 48V~53V DC (depending on the power supply), max. 15.4 watts PoE Power Output IEEE 802.3at Standard - Per port 53V~56V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2(+), 3/6(-) PoE Power Budget 144 watts max. (depending on power input) PD @ 7 watts 4 units PoE Ability PD @ 15.4 watts 4 units PD @ 30.8 watts 4 units Layer 2 Management Functions Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status Port Mirroring TX/RX/BothMany-to-1 monitor 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs Link Aggregation IEEE 802.3ad LACP/static trunk3 groups with 2 ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) 7

IGS-5226-4P2T Traffic classification based,strict priority and WRR 8-level priority for switching: QoS - Port number - 802.1p priority - 802.1Q VLAN tagging - DSCP/ToS field in IP packet IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groupsIGMP querier mode support MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groupsMLD querier mode support Access Control List IP-based ACL/MAC-based ACLUp to 256 entries Per port bandwidth control Bandwidth Control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps Layer 3 Functions IP Interfaces Max. 8 VLAN interfaces Routing Table Max. 32 routing entries Routing Protocols IPv4 software static routingIPv6 software static routing Management Basic Management Interfaces Telnet, Web browser, SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB SNMP MIBs RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP Power over Ethernet MIB Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) Railway Traffic *EN50155 IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP Standards Compliance IEEE 802.3af Power over EthernetIEEE 802.3at Power over Ethernet Plus IEEE 802.3az EEE (Energy Efficient Ethernet) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) Environment Operating Temperature: -40 ~ 75 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -40 ~ 80 degrees CRelative Humidity: 5 ~ 95% (non-condensing) Standard Accessories 6 x Waterproof RJ45 Connector 1 x M12 5-pin A-coded female connector power cable, 1.2m Packet Contents 1 x Wall-mount kit1 x DIN-rail kit 1 x M12 Power Waterproof Cap 1 x Quick Installation Guide 8

IGS-5226-4P2T Ordering Information Top View Side View Front View Side View Rear View LNK/ACT LNK 1 ACT 2 LNK/ACT PoE 3 4 LNK/ACT PoE 5 6 V2 V1 FAULT V2 V1 PWR 2 R.O. Mounting Kit PWR 1 Ring INPUT DC 48~56V PoE IP50 Mgt. IGS-5226-4P2T Dimensions ( unit = mm ) Reset Bottom View Ordering Information IGS-5226-4P2T Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch(-40~75 degrees C) Related Products IGS-604HPT-RJ Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) IGS-604HPT-M12 Industrial IP67-rated 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40~75 degrees C) ISW-800T-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch (-40~75 degrees C) ISW-804PT-M12 Industrial IP67-rated 8-Port 10/100Mbps M12 Ethernet Switch with 4-Port PoE (-40~75 degrees C) PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, IGS-5226-4P2T Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2016 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 9