産業用PoEスイッチPLANET GS-5220-8UP2T2X

GS-5220-8UP2T2X L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/10G SFP+ Managed Switch Physical Ports • 8-port 10/100/1000BASE-T with 72W PoE injector • 2-port 1/10G BASE-X SFP+ • RS-232 RJ45 console interface for switch basic management and setup Power over Ethernet • Up to 8 ports of IEEE 802.3af/802.3at/802.3bt devices powered • Supports PoE Power up to 72 watts for each PoE port • Auto detects powered device (PD) • Circuit protection prevents power interference between Perfect Ultra PoE Managed Switch with L2+/L4 Switching and Security ports PLANET GS-5220-8UP2T2X Layer 3 Managed Gigabit Switch supports both IPv4 • Remote power feeding up to 100 meters and IPv6 protocols and Layer 3 OSPFv2 dynamic routing and static routing, • PoE Management and provides 8 10/100/1000BASE-T ports featuring 75-watt 802.3bt PoE++, 2 additional Gigabit copper ports and another 2 extra 1/10 Gigabit BASE-X – PoE Port Status monitoring SFP+ fiber slots. Each of the eight Gigabit ports provides 75 watts of power, with – Over Temperature Protection a total power budget of up to 240 watts for the different types of PoE applications – PoE usage threshold being employed. It provides a quick, safe and cost-effective Power over Ethernet – Temperature threshold network solution to IP security surveillance for small businesses and enterprises. – Per port PoE function enable/disable – PoE Port Power feeding priority – Per PoE port power limit – PD classification detection – Sequence port PoE Layer 2 Features • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize 2 x 10/100/1000BASE-T the network bandwidth RJ45 Type Console RJ45 Port • Storm Control support – Broadcast/Multicast/Unknown unicast • Supports VLAN – IEEE 802.1Q tagged VLAN – Up to 255 VLANs groups, out of 4094 VLAN IDs – Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) 8 x Gigabit 802.3bt 2 x 10G/1G PoE+ Port SFP+ Slot – Private VLAN Edge (PVE) 1

GS-5220-8UP2T2X 75 Watts of Power over 4-pair UTP – Protocol-based VLAN Adopting the IEEE 802.3bt standard, instead of delivering power over 2-pair twisted UTP – be it end-span (Pins 1, 2, 3 and 6) or mid-span (Pins 4, 5, 7 and 8), – MAC-based VLAN the GS-5220-8UP2TX Ultra PoE switch provides the capability to source up to 75 – Voice VLAN watts of power by using all the four pairs of standard Cat. 5e/6 Ethernet cabling. – GVRP In the new 4-pair system, two PSE controllers will be used to power both the data • Supports Spanning Tree Protocol pairs and the spare pairs. It can offer more PoE applications, such as: – STP, IEEE 802.1D Spanning Tree Protocol – PoE lighting – RSTP, IEEE 802.1w Rapid Spanning Tree Protocol – PoE PTZ speed dome camera – MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, – Any network device that needs higher PoE power to work normally spanning tree by VLAN – Thin-client – BPDU Guard – AIO (All-in-One) touch PC • Supports Link Aggregation – Remote digital signage display – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) Redundant Ring, Fast Recovery for Critical Network Applications – Maximum 6 trunk groups, up to 4 ports per trunk group The GS-5220-8UP2T2X supports redundant ring technology and features – Up to 44Gbps bandwidth (full duplex mode) strong, rapid self-recovery capability to prevent interruptions and external • Provides port mirror (many-to-1) intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring • Port mirroring to monitor the incoming or outgoing traffic on Protection Switching) technology and Spanning Tree Protocol (802.1w RSTP) a particular port into customer’s network to enhance system reliability and uptime in harsh • Loop protection to avoid broadcast loops environments. In a certain simple Ring network, the recovery time could be less than 50ms to quickly bring the network back to normal operation. • Supports ERPS (Ethernet Ring Protection Switching) ERPS Ring for Video Transmission Redundancy Layer 3 IP Routing Features GS-5220-8UP2T2X 10G • IP dynamic routing protocol supports OSPFv2 GS-5220-8UP2T2X PoE • Routing interface provides per VLAN routing mode PoE • Supports maximum 128 static routes and route 10G Traffic Control Center PoE IP Camera summarization PoE IP Camera Recovery time < 20 ms PoE 1000 Quality of Service 10G GS-5220-8UP2T2X Network VideoRecorder • Ingress Shaper and Egress Rate Limit per port bandwidth 10G 10GBASE-SR/LR Fiber-optic control PoE 1000BASE-T UTP with PoE • 8 priority queues on all switch ports • Traffic classification Cybersecurity Network Solution to Minimize Security Risks – IEEE 802.1p CoS The cybersecurity feature included to protect the switch management in a mission- – TOS/DSCP/IP Precedence of IPv4/IPv6 packets critical network virtually needs no effort and cost to install. Both SSH and SSL – IP TCP/UDP port number protocols are utilized to provide strong protection against advanced threats. The – Typical network application network administrator can now construct highly-secure corporate networks with • Strict priority and Weighted Round Robin (WRR) CoS considerably less time and effort than before. policies • Supports QoS and In/Out bandwidth control on each port Flexible and Extendable 10Gb Ethernet Solution • Traffic-policing policies on the switch port 10G Ethernet is a big leap in the evolution of Ethernet. Each of the 10G SFP+ • DSCP remarking slots in the GS-5220-8UP2T2X supports dual speed and 10GBASE-SR/LR or 1000BASE-SX/LX. With its 2-port,10G Ethernet link capability, the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the 2

GS-5220-8UP2T2X transmission distance or the transmission speed required to extend the network Multicast efficiently. The GS-5220-8UP2T2X provides broad bandwidth and powerful • Supports IGMP Snooping v1, v2 and v3 processing capacity. • Supports MLD Snooping v1 and v2 • Querier mode support Built-in Unique PoE Functions for Surveillance Management • IGMP Snooping port filtering As a managed PoE Switch for surveillance network, the GS-5220-8UP2T2X • MLD Snooping port filtering features the following intelligent PoE management functions: • Multicast VLAN Registration (MVR) support – PD Alive Check – Scheduled Power Recycling – SMTP/SNMP Trap Event Alert Security – PoE Schedule • Authentication – IEEE 802.1x Port-based/MAC-based network access authentication Intelligent Powered Device Alive Check The GS-5220-8UP2T2X can be configured to monitor a connected PD status in – Built-in RADIUS client to co-operate with the RADIUS real time via ping action. Once the PD stops working and it is without response, the servers GS-5220-8UP2T2X will resume the PoE port power and bring the PD back to work. – TACACS+ login users access authentication It will greatly enhance the network reliability through the PoE port resetting the PD’s – RADIUS/TACACS+ users access authentication power source, thus reducing administrator management burdenduring specified • Access Control List time intervals and it is a powerful function to help SMBs or enterprises save power – IP-based Access Control List (ACL) and money. – MAC-based Access Control List Step 1 Step 2 • Source MAC/IP address binding • DHCP Snooping to filter un-trusted DHCP messages PT PoE Camera No Response......PD Status Good!! • Dynamic ARP Inspection discards ARP packets with Ping Request invalid MAC address to IP address binding Ping Request • IP Source Guard prevents IP spoofing attacks Ping Echo Check alive status for 3 times • Auto DoS rule to defend DoS attack Step 3 Step 4 • IP address access management to prevent unauthorized Alarm Notification PoE PD Alive!! intruder PoE ON OFF ON ON Management Restart PoE device if without response • IPv4 and IPv6 dual stack management • Switch Management Interfaces – Console/Telnet Command Line Interface Scheduled Power Recycling – Web switch management The GS-5220-8UP2T2X allows each of the connected PDs to reboot at a specified – SNMP v1, v2c, and v3 switch management time each week. Therefore, it will reduce the chance of PD crash resulting from – SSH/SSL secure access buffer overflow. • IPv6 IP Address/NTP/DNS management Automatically Reboot • Built-in Trivial File Transfer Protocol (TFTP) client Every Friday 23:00 • BOOTP and DHCP for IP address assignmentS M T W T F S • System Maintenance CPU/Buffer – Firmware upload/download via HTTP/TFTP Load 85% – Reset button for system reboot or reset to factory default – Dual Images PoE CPU/Buffer Load 10% • DHCP Relay • DHCP Option82 ON OFF ON PoE PT Camera 3

GS-5220-8UP2T2X SMTP/SNMP Trap Event Alert • User Privilege levels control Though most NVR or camera management software offers SMTP email alert • NTP (Network Time Protocol) function, the GS-5220-8UP2T2X further provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the • Link Layer Discovery Protocol (LLDP) and LLDP-MED network connection, loss of PoE power or the rebooting response by the PD Alive • Network Diagnostic Check process. – ICMPv6/ICMPv4 Remote Ping SMTP/SNMP Trap Event Alert – Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues GS-5220-8UP2T2X • SMTP/Syslog remote alarm E-mail Alert • Four RMON groups (history, statistics, alarms and events) • SNMP trap for interface Linkup and Link down notification Malfunction • System Log PoE PoE • PLANET Smart Discovery Utility for deployment management IP Camera IP Camera PoE Schedule for Energy Saving Besides being used for IP surveillance, the GS-5220-8UP2T2X is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the GS-5220-8UP2T2X can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget. 8AM 5PM 5PM 8AM PSE with PoE Schedule PSE with PoE Schedule PoE PoE PoE PoE PoE PoE PoE PoE Power Power Power Power Power Power Power Power Off Off Off On On On On On 6 watts 6 watts 12 watts 60 watts 6 watts 6 watts 12 watts 60 watts Saves 24 watts/hr during off-business hours Total consumption of 84 watts/hr Total Saved = 10800 watts/month PoE 1000BASE-T UTP with PoE 4

GS-5220-8UP2T2X Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with Video IP Surveillances. From the GS-5220-8UP2T2X GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and remotely monitor what is going on in the production line. Moreover, you can get real-time surveillance’s information and online/offline status, and can have PoE reboot control from GUI. Solution for IPv6 Networking With the support for IPv6/IPv4 protocol, and easy and friendly management interfaces, the GS-5220-8UP2T2X is the best choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment and without having to replace the network facilities even though ISPs establish the IPv6 FTTx edge network. Application WEB TELNET SSL ICMP Transport Layer SNMP SSH NTP DHCP IPv4 IPv6 Stack Stack IPv4 Network IPv6 Network IPv4 Management Host GS-5220-8UP2T2X IPv6 Management Host Layer 3 Routing Support The GS-5220-8UP2T2X enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database. Robust Layer2 Features The GS-5220-8UP2T2X can be programmed for advanced switch management function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The GS-5220-8UP2T2X allows the operation of a high- speed trunk combining multiple ports. Supporting 6 trunk groups, it enables a maximum of up to 8 ports per trunk and supports connection fail-over as well. Powerful Security The GS-5220-8UP2T2X offers comprehensive layer 2 to layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP port number or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. 5

GS-5220-8UP2T2X Enhanced Security and Traffic Control The GS-5220-8UP2T2X also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrator can now build highly-secure corporate networks with considerably less time and effort than before. User-friendly Secure Management For efficient management, the GS-5220-8UP2T2X is equipped with console, web and SNMP management interfaces. With the built-in web-based management interface, the GS-5220-8UP2T2X offers an easy-to-use, platform independent management and configuration facility. The GS-5220-8UP2T2X supports SNMP and it can be managed via any management software based on the standard SNMP v1 and v2 protocols. For reducing product learning time, the GS-5220-8UP2T2X offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the GS-5220-8UP2T2X offers remote secure management by supporting SSH, SSL and SNMPv3 connection which can encrypt the packet content at each session. GS-5220-8UP2T2X 01010101010110010101010100010101010 01010101010110010101010100010101010 01010101010110010101010100010101010 Computer SSL SSH SNMPv3 Intelligent SFP Diagnosis Mechanism The GS-5220-8UP2T2X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. 6

GS-5220-8UP2T2X Applications Layer 3 VLAN Static Routing and PoE Application With the built-in robust IPv4/IPv6 Layer 3 traffic routing protocols, the GS-5220-8UP2T2X ensures reliable routing between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 128 routing entries. The GS-5220-8UP2T2X is certainly a cost-effective and ideal solution for enterprises. Providing up to 8 Gigabit PoE++ ports and in-line power interface, the GS-5220-8UP2T2X PoE++ Managed Switch can easily build a centrally-controlled power network shared by wireless Gigabit AP, IP phone system, or mega-pixel IP camera system group for the enterprises. VLAN Routing + PoE Applications PoE PoE VoIP Ph V onL eA (N P1 oE00 ) D IPo m Sua ri vn e iB V lla n1 c9 L2 A. N e 3 (1 P6 o8 0.1 00 E D ) .x o/2 m4 ain A 19 GS-5220-8UP2T2X 2.168.3 Layer 3 IP Static Routing 0.x/24 PoE 10G Wireless N A VVLA P R (P C IP Ser N20 oE) on Ptr B ver 0 ol X C SD eom VL eA n r a t v e er in r C N 11 9 D2 o.1 m6 a8 i. n2 0 1. 9x 2/2 .14 68.0.x/24 PoE 1000BASE-T UTP with PoE 10G 10GBASE-SR/LR Fiber-optic PoE Wi-Fi Hotspot Solution with Extended Network Infrastructure for Public Spaces The GS-5220-8UP2T2X comes with non-blocking design, desktop size and SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in cost. Providing eight 10/100/1000BASE-T PoE++ ports, in-line power interfaces and two 10 Gigabit SFP interfaces, the GS-5220-8UP2T2X can easily build a Networking Authentication on Wireless LAN Controllers system for the enterprises. For instance, it can work with the Wireless Controller and RADIUS Server to perform comprehensive security for wireless user authentication with powered APs. 7

GS-5220-8UP2T2X Specifications Product GS-5220-8UP2T2X Hardware Specifications Copper Ports 10 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X interface with Port-1 to Port-10 SFP/mini-GBIC Slots 2 x 1/10G BASE-X SFP interfaces with Port-11 to Port-12 PoE Injector Port 8 ports with 802.3bt/at/af PoE injector function with Port-1 to Port-8 Console 1 x RJ45 serial port (115200 , 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 60Gbps/non-blocking Throughput 44.642Mpps@ 64Bytes packet Address Table 16K entries, automatic source address learning and aging Shared Data Buffer 16Mbits IEEE 802.3x pause frame for full-duplex Flow Control Back pressure for half-duplex Jumbo Frame 9KB < 5 sec: System reboot Reset Button > 5 sec: Factory default System: Fan Alert (RED) Ring (Green) SYS (Green) PWR (Green) Per10/100/1000BASE-T RJ45 Interfaces (Port 1 to Port 10): LED Indicator 1000Mbps LNK/ACT (Green) 10/100Mbps LNK/ACT (Orange) 802.3bt PoE-in-Use (Green) (Port 1 to Port 8) 802.3at/af PoE-in-Use (Orange) (Port 1 to Port 8) 1/10G Mbps SFP Interfaces (Port 11 to Port 12): 1G LNK/ACT (Green) 10G Mbps (Orange) Power Requirements 100~240V AC, 50/60Hz Power Consumption (Full Loading) 258 watts/880BTU (max.) ESD Protection 6KV DC Dimensions (W x D x H) 330 x 200 x 43.5 mm, 1U height Weight 2kg Power Over Ethernet PoE Standard IEEE 802.3af/802.3at/802.3bt Ultra PoE PSE PoE Power Supply Type End-span/Mid-span/UPoE PoE Power Output Per port 52V DC, max. 72 watts End-span: 1/2(-), 3/6(+) Power Pin Assignment Mid-span: 4/5(+), 7/8(-) UPoE: 1/2(-), 3/6(+), 4/5(+), 7/8(-) 240 watts (max.) @ 25 degrees C PoE Power Budget 200 watts (max.) @ 50 degrees C PD @ 7 watts 8 units PD @ 15.4 watts 8 units PoE Ability PD @ 30.8 watts 8 units PD @ 60 watts 4 units Layer2 Management Functions Basic Management Interfaces Console , Web browser, SNMP v1, v2c Secure Management Interfaces SSH, SSL, SNMP v3 ONVIF device discovery ONVIF ONVIF device monitoring Floor Map Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable/enable Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX/RX/Both Port Mirroring Many-to-1 monitor 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling VLAN Private VLAN Edge (PVE) MAC-based VLAN 8

GS-5220-8UP2T2X Protocol-based VLAN Voice VLAN VLAN MVR (Multicast VLAN Registration) GVRP Up to 255 VLAN groups, out of 4094 VLAN IDs IEEE 802.3ad LACP/Static Trunk Link Aggregation Supports 6 trunk groups with 4 ports per trunk Traffic classification based, strict priority and WRR 8-level priority for switching - Port number QoS - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet IGMP (v1/v2/v3) Snooping, up to 255 multicast groups IGMP Snooping IGMP Querier mode support MLD (v1/v2) Snooping, up to 255 multicast groups MLD Snooping MLD Querier mode support IP-based ACL/MAC-based ACL Access Control List Up to 256 entries Per port bandwidth control Bandwidth Control Ingress: 10Kbps~13000Mbps Egress: 10Kbps~13000Mbps RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2737 Entity MIB SNMP MIBs RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2618 RADIUS Client MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Power over Ethernet MIB Layer 3 Function IP Interfaces Max. 128 VLAN interfaces Routing Table Max. 128 routing entries IPv4 OSPFv2 Routing Protocols IPv4 hardware static routing IPv6 hardware static routing Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE EEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z 1000BASE-SX/LX IEEE 802.3ab 1000BASE-T IEEE 802.3ae 10Gb/s Ethernet IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service Standards Compliance IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt 4-pair Power over Ethernet RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 9

GS-5220-8UP2T2X RFC 2236 IGMP v2 RFC 3376 IGMP v3 Standards Compliance RFC 2710 MLD v1 FRC 3810 MLD v2 RFC 2328 OSPF v2 Environment Temperature: 0 ~ 50 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 70 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing) Ordering Information GS-5220-8UP2T2X L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 10/100/1000T + 2-Port 10G SFP+ Managed Switch Available 10Gbps Modules MTB-SR 10GBASE-SR mini-GBIC module - 300m MTB-LR 10GBASE-LR mini-GBIC module – 10km MTB-LA20 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 20km MTB-LB20 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 20km MTB-LA40 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 40km MTB-LB40 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 40km MTB-LA60 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 60km MTB-LB60 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 60km Available 1000Mbps Modules MGB-GT SFP-Port 1000BASE-T Module MGB-SX SFP-Port 1000BASE-SX mini-GBIC module MGB-LX SFP-Port 1000BASE-LX mini-GBIC module MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km PLANET Technology Corporation 11F., No.96, Minquan Rd., Xindian Dist., New Taipei City GS-5220-8UP2T2X 231, Taiwan (R.O.C.) PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2018 PLANET Technology Corp. All rights reserved. Email: sales@planet.com.tw www.planet.com.tw 10