デジタイザ　M2p.59x 16ビット、5MS/s, 20MS/s, 40MS/s, 80MS/s, 125MS/s、1~8チャネル

M2p 汎用デジタイザ M2p.59xx 16ビット、5MS/s, 20MS/s, 40MS/s, 80MS/s, 125MS/s、1～8チャネル デジタルI/Oオプション ・サンプリングレート： 5MS/s, 20MS/s, 40MS/s, 80MS/s, 125MS/s 1/2/4/8チャネル ・入力抵抗：1MΩ/50Ω ・チャネル毎に独立した16ビットADおよびアンプによる全チャネル同時サンプリング ・6入力レンジ：±200mV～±10 V ・トリガ：Window、パルス幅、スパイク、OR/AND ・測定モード：Streaming、ABA、マルチレコード、ゲートレコード、Time stamp他 ・PCとの接続：PcIe gen1 x4 ・デジタルI/O追加オプションあり（+16チャネル） 製品名 分解能 入力チャネル サンプリングレート 帯域 M2p.5911-x4 16 2 5MS/s 2.5MHz M2p.5912-x4 16 4 5MS/s 2.5MHz M2p.5916-x4 16 4 5MS/s 2.5MHz M2p.5913-x4 16 8 5MS/s 2.5MHz M2p.5921-x4 16 2 20MS/s 10MHz M2p.5922-x4 16 4 20MS/s 10MHz M2p.5926-x4 16 4 20MS/s 10MHz M2p.5923-x4 16 8 20MS/s 10MHz M2p.5931-x4 16 2 40MS/s 20MHz M2p.5932-x4 16 4 40MS/s 20MHz M2p.5936-x4 16 4 40MS/s 20MHz M2p.5933-x4 16 8 40MS/s 20MHz

製品名 分解能 入力チャネル サンプリングレート 帯域 M2p.5940-x4 16 1 80MS/s 40MHz M2p.5941-x4 16 2 80MS/s 40MHz M2p.5942-x4 16 4 80MS/s 40MHz M2p.5946-x4 16 4 80MS/s 40MHz M2p.5943-x4 16 8 80MS/s 40MHz M2p.5960-x4 16 1 125MS/s 60MHz M2p.5961-x4 16 2 125MS/s 60MHz M2p.5962-x4 16 4 125MS/s 60MHz M2p.5966-x4 16 4 125MS/s 60MHz M2p.5968-x4 16 4 125MS/s（4チャネル） 60MHz 8 80MS/s（8チャネル）

M2p.59xx-x4 - 16 bit general purpose Digitizer • Up to 125 MS/s on four or 80 MS/s on eight channels • Ultra Fast PCI Express x4 interface Speed SNR ENOB5 MS/s up to 86.0 dB up to 14.0 LSB • Simultaneously sampling on all channels 20 MS/s up to 81.0 dB up to 13.2 LSB • Separate dedicated 16 bit ADC and amplifier per channel 40 MS/s up to 75.3 dB up to 12.2 LSB • 6 input ranges: ±200 mV up to ±10 V 80 MS/s up to 74.2 dB up to 12.0 LSB125 MS/s up to 73.3 dB up to 11.8 LSB • 512 MSamples (1 GByte) on-board memory • Window, re-arm, OR/AND trigger • Synchronization of up to 16 cards per system • Features: Single-Shot, Streaming, Multiple Recording, Gated Sampling, ABA, Timestamps • Direct data transfer to CUDA GPU using SCAPP option • PCIe x4 Gen 1 Interface • Works with x4/x8/x16* PCIe slots • Sustained streaming mode up to 700 MB/s** • Half-length PCIe Form Factor Operating Systems Recommended Software Drivers • Windows 7 (SP1), 8, 10, • Visual C++, Delphi, C++ Builder, • MATLAB Server 2008 R2 and newer GNU C++, VB.NET, C#, J#, Java, • LabVIEW • Linux Kernel 2.6, 3.x, 4.x, 5.x Python • IVI • Windows/Linux 32 and 64 bit • SBench 6 single-ended channels true differential channels General Information (non-isolated) Model 1 ch 2 ch 4 ch 8 ch 1 ch 2 ch 4 ch The M2p.59xx series allows recording of up to M2p.5911-x4 5 MS/s 5 MS/s 5 MS/s 5 MS/s eight Single-Ended channels or up to four differen- M2p.5912-x4 5 MS/s 5 MS/s 5 MS/s 5 MS/s 5 MS/s tial channels both with sampling rates of up to M2p.5916-x4 5 MS/s 5 MS/s 5 MS/s 5 MS/s 5 MS/s 5 MS/s 125 MS/s. These PCI Express cards offer outstand- M2p.5913-x4 5 MS/s 5 MS/s 5 MS/s 5 MS/s 5 MS/s 5 MS/s 5 MS/s M2p.5920-x4 20 MS/s (OEM version) 20 MS/s (OEM version) ing A/D features both in resolution and speed. M2p.5921-x4 20 MS/s 20 MS/s 20 MS/s 20 MS/s The cards can be switched between Single-Ended M2p.5922-x4 20 MS/s 20 MS/s 20 MS/s 20 MS/s 20 MS/s inputs with a programmable offset and true differen- M2p.5926-x4 20 MS/s 20 MS/s 20 MS/s 20 MS/s 20 MS/s 20 MS/s tial inputs. If used in differential mode each two M2p.5923-x4 20 MS/s 20 MS/s 20 MS/s 20 MS/s 20 MS/s 20 MS/s 20 MS/s inputs are connected together reducing the number M2p.5930-x4 40 MS/s (OEM version) 40 MS/s (OEM version) of available channels by half. M2p.5931-x4 40 MS/s 40 MS/s 40 MS/s 40 MS/s Importantly, the high-resolution 16-bit ADCs deliver M2p.5932-x4 40 MS/s 40 MS/s 40 MS/s 40 MS/s 40 MS/s sixteen times more resolution than digitizers using M2p.5936-x4 40 MS/s 40 MS/s 40 MS/s 40 MS/s 40 MS/s 40 MS/s older 12-bit technology and 256 times more resolu- M2p.5933-x4 40 MS/s 40 MS/s 40 MS/s 40 MS/s 40 MS/s 40 MS/s 40 MS/s M2p.5940-x4 80 MS/s 80 MS/s tion than what is available from digital scopes that M2p.5941-x4 80 MS/s 80 MS/s 80 MS/s 80 MS/s commonly use 8-bit ADCs. M2p.5942-x4 80 MS/s 80 MS/s 80 MS/s 80 MS/s 80 MS/s All boards of the M2p.59xx series may use the M2p.5946-x4 80 MS/s 80 MS/s 80 MS/s 80 MS/s 80 MS/s 80 MS/s whole installed on-board memory of up to M2p.5943-x4 80 MS/s 80 MS/s 80 MS/s 80 MS/s 80 MS/s 80 MS/s 80 MS/s 512 MSamples, completely for the currently activat- M2p.5960-x4 125 MS/s 125 MS/s ed number of channels. M2p.5961-x4 125 MS/s 125 MS/s 125 MS/s 125 MS/s M2p.5962-x4 125 MS/s 125 MS/s 125 MS/s 125 MS/s 125 MS/s M2p.5966-x4 125 MS/s 125 MS/s 125 MS/s 125 MS/s 125 MS/s 125 MS/s M2p.5968-x4 125 MS/s 125 MS/s 125 MS/s 80 MS/s 125 MS/s 125 MS/s 125 MS/s *Some x16 PCIe slots are for the use of graphic cards only and can’t be used for other cards.**Throughput measured with a motherboard chipset supporting a TLP size of 256 bytes.SPECTRUM INSTRUMENTATION GMBH · AHRENSFELDER WEG 13-17 · 22927 GROSSHANSDORF · GERMANY 7.5.2020 PHONE: +49 (0)4102-6956-0 · FAX: +49 (0)4102-6956-66 · E-MAIL: info@spec.de · INTERNET: www.spectrum-instrumentation.com

Software Support building blocks for basic functions like filtering, averaging, data de- multiplexing, data conversion or FFT. All the software is based on Windows drivers C/C++ and can easily be implemented, expanded and modified The cards are delivered with drivers for Windows 7, Windows 8 with normal programming skills. and Windows 10 (each 32 bit and 64 bit). Programming exam- ples for Visual C++, C++ Builder, LabWindows/CVI, Delphi, Visu- Hardware features and options al Basic, VB.NET, C#, J#, Python, Java and IVI are included. PCI Express x4 Linux Drivers The M2p series cards use a PCI Express All cards are delivered with full Linux support. Pre com- x4 Gen 1 connection. They can be used piled kernel modules are included for the most common in PCI Express x4, x8 and x16 slots with distributions like Fedora, Suse, Ubuntu LTS or Debian. The hosts supporting Gen 1, Gen 2, Gen 3 or Linux support includes SMP systems, 32 bit and 64 bit Gen4. The maximum sustained data trans- systems, versatile programming examples for GNU C++, fer rate is more than 700 MByte/s (read direction) or 700 MByte/s Python as well as the possibility to get the driver sources for your (write direction) per slot. Physically supported slots that are electri- own compilation. cally connected with only x1 or x2 can also be used with the M2p series cards, but with reduced data transfer rates. SBench 6 Connections A base license of SBench 6, the The cards are equipped with SMB connectors for the an- easy-to-use graphical operating alog signals as well as for the external trigger and clock software for Spectrum cards, is in- input. In addition, there are four MMCX connectors: one cluded in the delivery. The base li- multi-function output (X0) and three multi-function I/O cense makes it is possible to test connectors (X1, X2, X3). These multi-function connectors the card, display acquired data can be individually programmed to perform different and make some basic measure- functions: ments. It's a valuable tool for checking the card’s performance • Clock output (X0 only) and assisting with the unit’s initial • Trigger output setup. The cards also come with a demo license for the SBench 6 • Status output (armed, triggered, ready, ...) professional version. This license gives the user the opportunity to • Synchronous digital inputs, being stored inside the analog data test the additional features of the professional version with their samples hardware. The professional version contains several advanced • Asynchronous I/O lines measurement functions, such as FFTs and X/Y display, import and • Logic trigger inputs export utilities as well as support for all acquisition modes including data streaming. Data streaming allows the cards to continuously ac- quire data and transfer it directly to the PC RAM or hard disk. Input Amplifier SBench 6 has been optimized to handle data files of several The analog inputs can be adapt- GBytes. SBench 6 runs under Windows as well as Linux (KDE, ed to real world signals using a GNOME and Unity) operating systems. A test version of SBench 6 wide variety of settings that are can be downloaded directly over the internet and can run the pro- individual for each channel. By fessional version in a simulation mode without any hardware in- using software commands the in- stalled. Existing customers can also request a demo license for the put termination can be changed professional version from Spectrum. More details on SBench 6 can between 50 Ohm and 1 MOhm, one can select a matching input be found in the SBench 6 data sheet. range and the signal offset can be compensated for. Third-party products Differential inputs Spectrum supports the most popular third-party software products With a simple software command the inputs can individually be such as LabVIEW, MATLAB or LabWindows/CVI. All drivers come switched from single-ended (in relation to ground) to differential by with detailed documentation and working examples are included in combining each two single-ended inputs to one differential input. the delivery. Support for other software packages, like VEE or Da- When the inputs are used in differential mode the A/D converter syLab, can also be provided on request. measures the difference between two lines with relation to system ground. SCAPP – CUDA GPU based data processing Automatic on-board calibration For applications requiring high performance signal All of the channels are calibrated in factory before the board is and data processing shipped. To compensate for different variations like PC power sup- Spectrum offers SCAPP ply, temperature and aging, the software driver provides routines (Spectrum’s CUDA Access for an automatic onboard offset and gain calibration of all input for Parallel Processing). ranges. All the cards contain a high precision on-board calibration The SCAPP SDK allows a reference. direct link between Spec- trum digitizers, AWGs or Digital inputs Digital Data Acquisition This option acquires additional syn- Cards and CUDA based GPU cards. Once in the GPU users can chronous digital channels phase- harness the processing power of the GPU’s multiple (up to 5000) stable with the analog data. As de- processing cores and large (up to 24 GB) memories. SCAPP uses fault a maximum of 3 additional an RDMA (Linux only) process to send data at the full PCIe transfer digital inputs are available on the front plate of the card using the speed to and from the GPU card. The SDK includes a set of exam- multi-purpose I/O lines. An additional option offers 16 more digital ples for interaction between the Spectrum card and the GPU card channels. and another set of CUDA parallel processing examples with easy

Ring buffer mode fast digitizer. The exact position of the trigger events is stored as The ring buffer mode is the timestamps in an extra memory. standard mode of all oscillo- scope instruments. Digitized Timestamp data is continuously written The timestamp function into a ring memory until a writes the time positions of trigger event is detected. After the trigger, post-trigger samples are the trigger events in an extra recorded and pre-trigger samples can also be stored. The number memory. The timestamps are of pre-trigger samples available simply equals the total ring mem- relative to the start of record- ory size minus the number of post trigger samples. ing, a defined zero time, ex- ternally synchronized to a radio clock, an IRIG-B a GPS receiver. FIFO mode Using the external synchronization gives a precise time relation for The FIFO or streaming mode is designed for continuous data trans- acquisitions of systems on different locations. fer between the card and the PC memory. When mounted in a PCI Express x4 Gen 1 interface read streaming speeds of up to 700 External clock input and output MByte/s are possible. The control of the data stream is done auto- Using a dedicated connector a sampling clock can be fed in from matically by the driver on interrupt request basis. The complete in- an external system. Additionally it’s also possible to output the in- stalled onboard memory is used to buffer the data, making the ternally used sampling clock on a separate connector to synchro- continuous streaming process extremely reliable. nize external equipment to this clock. Channel trigger Reference clock The digitizers offer a wide variety of trigger modes. These include The option to use a precise a standard triggering mode based on a signals level and slope, like external reference clock that found in most oscilloscopes. It is also possible to define a win- (typically 10 MHz) is nec- dow mode, with two trigger levels, that enables triggering when essary to synchronize the signals enter or exit the window. Each input has its own trigger cir- instrument for high-quality cuit which can be used to setup conditional triggers based on logi- measurements with external equipment (like a signal source). It’s cal AND/OR patterns. All trigger modes can be combined with a also possible to enhance the stability of the sampling clock in this re-arming mode for accurate trigger recognition even on noisy sig- way. The driver automatically generates the requested sampling nals. clock from the fed in reference clock. External trigger input Star-Hub All boards can be triggered using an external analog or digital sig- The Star-Hub is an additional mod- nal. The external trigger input has one comparator that can be used ule allowing the phase stable syn- for standard edge and level triggers. chronization of up to 16 boards in one system. Two versions are avail- Multiple Recording able: one with up to 6 cards and The Multiple Recording the large version supports up to 16 mode allows the recording of cards in one system. Both versions several trigger events with an can be mounted in two different extremely short re-arming ways, to either extend the cards time. The hardware doesn’t length to ¾ PCIe length occupying one slot, or extend its width to need to be restarted in be- two slots whilst keeping the ½ PCIe length. tween. The on-board memory is divided in several segments of the same size. Each of them is filled with data if a trigger event occurs. Independent of the number of boards Pre- and posttrigger of the segments can be programmed. The num- there is no phase delay between the ber of acquired segments is only limited by the used memory and channels. The Star-Hub distributes trigger is unlimited when using FIFO mode. and clock information between all boards. As a result all connected boards Gated Sampling are running with the same clock and the same trigger. All trigger sources can be The Gated Sampling mode combined with OR/AND. For digitizers allows data recording con- that means all channels of all cards to be trolled by an external gate trigger source at the same time. signal. Data is only record- ed if the gate signal has a programmed level. In addi- Multi-Purpose I/O 4 Standard + 16 Option tion a pre-area before start of the gate signal as well as a post area after end of the gate signal As standard each card has 4 multi-pur-pose I/O lines (3 x I/O and 1 x Output). can be acquired. The number of gate segments is only limited by As an option a piggy-back module carries the used memory and is unlimited when using FIFO mode. additional 16 mutli-purpose I/O lines making up to 19 digtal inputs or 20 digi- tal outputs. ABA mode This option is available with SMB connec- The ABA mode com- tors or with FX/2 connector for flat-ribbon bines slow continuous cable, with pin-compatibility with previous data recording with fast hardware versions. acquisition on trigger events. The ABA mode works like a slow data logger combined with a

All I/O lines can be used for synchronous digital data acquisition (digitizer), synchronous digital data output/marker output (AWG), asynchronous digital I/O, can carry additional status information or can be used as trigger inputs External Amplifiers For the acquisition of extreme- ly small voltage levels with a high bandwidth a series of ex- ternal amplifiers is available. Each of the one channel am- plifiers is working with a fixed input impedance and allows - depending on the bandwidth - to select different amplifica- tion levels between x10 (20 dB) up to x1000 (60 dB). Us- ing the external amplifiers of the SPA series voltage levels in the uV and mV area can be acquired. Technical Data Analog Inputs Resolution 16 bit (can be reduced to acquire simultaneous digital inputs) Input Range software programmable ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10 V Input Type software programmable Single-ended or True Differential Input Offset (single-ended) software programmable programmable to ±100% of input range in steps of 1% ADC Differential non linearity (DNL) ADC only 591x: ±0.2/±0.8 LSB (typ./max.) 592x: ±0.2/±0.8 LSB (typ./max.) 593x: ±0.5/±0.9 LSB (typ./max.) 594x: ±0.5/±0.9 LSB (typ./max.) 596x: ±0.5/±0.9 LSB (typ./max.) ADC Integral non linearity (INL) ADC only 591x: ±1.0/±2.3 LSB (typ./max.) 592x: ±1.0/±2.3 LSB (typ./max.) 593x: ±2.0/±7.5 LSB (typ./max.) 594x: ±2.0/±7.5 LSB (typ./max.) 596x: ±2.0/±7.5 LSB (typ./max.) Offset error (full speed), DC signal after warm-up and calibration ≤ 0.1% of range Gain error (full speed), DC signal after warm-up and calibration ≤ 0.1% of reading AC accuracy 1 kHz signal ≤ 0.3% of reading AC accuracy 50 kHz signal ≤ 0.5% of reading Crosstalk: Signal 1 MHz, 50 Ω range ≤ ±1V ≤ 95 dB on adjacent channels range ≥ ±2V ≤ 90 dB on adjacent channels Crosstalk: Signal 10 MHz, 50 Ω range ≤ ±1V ≤ 87 dB on adjacent channels range ≥ ±2V ≤ 85 dB on adjacent channels Analog Input impedance software programmable 50 Ω /1 MΩ || 30 pF Analog input coupling fixed DC Over voltage protection range ≤ ±1V ±5 V (1 MΩ), 3.5 Vrms (50 Ω) Over voltage protection range ≥ ±2V ±50 V (1 MΩ), 5 Vrms (50 Ω) Anti-Aliasing Filter (digital filtering active) 591x (5 MS/s) Digital Anti-Aliasing filter at 40% of sampling rate. Examples: 5 MS/s sampling rate -> anit-aliasing filter at 2 MHz 1 MS/s sampling rate -> anti-aliasing filter at 400 kHz Anti-Aliasing Filter (standard) 591x (5 MS/s) fixed 2.5 MHz 3rd order butterworth alike 592x (20 MS/s) fixed 10 MHz 3rd order butterworth alike 593x (40 MS/s) fixed 20 MHz 3rd order butterworth alike 594x (80 MS/s) fixed 40 MHz 3rd order butterworth alike 596x (125 MS/s) fixed 60 MHz 3rd order butterworth alike CMRR (Common Mode Rejection Ratio) range ≤ ±1V 100 kHz: 75 dB, 1 MHz: 60 dB, 10 MHz: 40 dB CMRR (Common Mode Rejection Ratio) range ≥ ±2V 100 kHz: 55 dB, 1 MHz: 52 dB, 10 MHz: 50 dB Channel selection (single-ended inputs) software programmable 1, 2, 4 or 8 channels (maximum is model dependent) Channel selection (true differential inputs) software programmable 1, 2 or 4 channels (maximum is model dependent)

Trigger Available trigger modes software programmable Channel Trigger, External, Software, Window, Pulse, Re-Arm, Spike, Or/And, Delay Channel trigger level resolution software programmable 16 bit Trigger edge software programmable Rising edge, falling edge or both edges Trigger pulse width software programmable 0 to [4G - 1] samples in steps of 1 sample Trigger delay software programmable 0 to [4G - 1] samples in steps of 1 samples Trigger holdoff (for Multi, ABA, Gate) software programmable 0 to [4G - 1] samples in steps of 1 samples Multi, ABA, Gate: re-arming time < 40 samples (+ programmed pretrigger + programmed holdoff) Pretrigger at Multi, ABA, Gate, FIFO software programmable 8 up to [32 kSamples / number of active channels] in steps of 8 Posttrigger software programmable 8 up to [8G - 4] samples in steps of 8 (defining pretrigger in standard scope mode) Memory depth software programmable 16 up to [installed memory / number of active channels] samples in steps of 8 Multiple Recording/ABA segment size software programmable 8 up to [installed memory / number of active channels] samples in steps of 8 Internal/External trigger accuracy 1 sample Timestamp modes software programmable Standard, Startreset, external reference clock on X1 (e.g. PPS from GPS, IRIG-B) Data format Std., Startreset: 64 bit counter, increments with sample clock (reset manually or on start) RefClock: 24 bit upper counter (increment with RefClock) 40 bit lower counter (increments with sample clock, reset with RefClock) Extra data software programmable none, acquisition of X1/X2/X3 inputs at trigger time, trigger source (for OR trigger) Size per stamp 128 bit = 16 bytes External trigger Ext X1, X2, X3 External trigger type Single level comparator 3.3V LVTTL logic inputs External trigger impedance software programmable 50 Ω / 5 kΩ For electrical specifications refer to External trigger input level ±5 V (5 kΩ), ±2.5 V (50 Ω), „Multi Purpose I/O lines“ section. External trigger over voltage protection ±20 V (5 kΩ), 5 Vrms (50 Ω) External trigger sensitivity 200 mVpp (minimum required signal swing) External trigger level software programmable ±5 V in steps of 1 mV External trigger bandwidth 50 Ω DC to 400 MHz n.a. 5 kΩ DC to 300 MHz DC to 125 MHz Minimum external trigger pulse width ≥ 2 samples ≥ 2 samples Multi Purpose I/O lines Number of multi purpose output lines one, named X0 Number of multi purpose input/output lines three, named X1, X2, X3 Multi Purpose line X0 X1, X2, X3 Input: available signal types software programmable n.a. Synchronous Digital-In, Asynchronous Digital-In, Timestamp Reference Clock, Logic trigger Input: signal levels n.a. 3.3 V LVTTL Input: impedance n.a. 10 kΩ to 3.3 V Input: maximum voltage level n.a. -0.5 V to +4.0 V Input: maximum bandwidth n.a. 125 MHz Output: available signal types software programmable Run-, Arm-, Trigger-Output, Run-, Arm-, Trigger-Output, Asynchronous Digital-Out, Asynchronous Digital-Out ADC Clock Output Output: impedance 50 Ω Output: drive strength Capable of driving 50 Ω loads, maximum drive strength ±48 mA Output: type / signal levels 3.3V LVTTL, TTL compatible for high impedance loads Output: update rate (synchronous modes) sampling clock

Option M2p.xxxx-DigFX2 / M2p.xxxx-DigSMB common Input: signal levels 3.3 V LVTTL Input: impedance 10 kΩ to 3.3 V Input: maximum voltage level -0.5 V to +4.0 V Input: maximum bandwidth 125 MHz Input: available signal types software programmable Synchronous Digital-In (M2p.59xx only), Asynchronous Digital-In Output: available signal types software programmable Run-, Arm-, Trigger-Output, Synchronous Digital-Out (M2p.65xx only), Asynchronous Digital-Out Output: update rate (synchronous modes) sampling clock Output: type / signal levels 3.3V LVTTL, TTL compatible for high impedance loads Output: impedance 50 Ω Output: drive strength Capable of driving 50 Ω loads, maximum drive strength ±48 mA Option M2p.xxxx-DigFX2 specific Number of additional multi-purpose I/O lines 16 (X4 to X19) Card width with installed option Requires one additional slot left of the main card’s bracket, on „solder side“ of the PCIe card Connector 1 x 40 pole half pitch (Hirose FX2 series, one adapter cable to IDC connector in standard 2.54mm pitch included (Cab-d40-xx-xx). 4 x SMB male, (jumper selectable between FX2/SMB for: X12, X13, X18 and X19)) Connector on card: Hirose FX2B-40PA-1.27DSL Flat ribbon cable connector: Hirose FX2B-40SA-1.27R Output: impedance FX2: 90 Ω , SMB: 50 Ω Output: drive strength Capable of driving 90 Ω loads (FX2), 50 Ω loads (SMB), maximum drive strength ±48 mA Compatibility Pinning compatible with M2i.xxxx-dig option and M2i.70xx connectors Option M2p.xxxx-DigSMB specific Number of additional multi purpose I/O lines 16 (X4 to X19) Card width with installed option Requires one additional slot left of the main card’s bracket, on „solder side“ of the PCIe card Connectors on bracket 10 x SMB male (X4 to X13) Internal connectors 6 x SMB male (X14 to X19) Output: impedance 50 Ω Output: drive strength Capable of driving 50 Ω loads, maximum drive strength ±48 mA Clock Clock Modes software programmable internal PLL, external clock, external reference clock, sync Internal clock range (PLL mode) software programmable see „Clock Limitations and Bandwidth“ table below Internal clock accuracy after warm-up ≤ ±1.0 ppm (at time of calibration in production) Internal clock aging ≤ ±0.5 ppm / year PLL clock setup granularity (int. or ext. reference) 1 Hz External reference clock range software programmable 128 kHz up to 125 MHz Direct external clock to internal clock delay 4.3 ns Direct external clock range see „Clock Limitations and Bandwidth“ table below Direct external clock minimum LOW/HIGH time see „Clock Limitations and Bandwidth“ table below External clock type Single level comparator External clock input level ±5 V (5 kΩ), ±2.5 V (50 Ω), External clock input impedance software programmable 50 Ω / 5 kΩ External clock over voltage protection ±20 V (5 kΩ), 5 Vrms (50 Ω) External clock sensitivity 200 mVpp (minimum required signal swing) External clock level software programmable ±5 V in steps of 1mV External clock edge rising edge used External reference clock input duty cycle 45% - 55% Clock output electrical specification Available via Multi Purpose output X0. Refer to „Multi Purpose I/O lines“ section. Synchronization clock multiplier „N“ for software programmable N being a multiplier (1, 2, 3, 4, 5, ... Max) of the card with the currently slowest sampling clock. different clocks on synchronized cards The card maximum (see „Clock Limitations and Bandwidth“ table below) must not be exceeded. ABA mode clock divider for slow clock software programmable 8 up to (64k - 8) in steps of 8 Channel to channel skew on one card < 200 ps (typical) Skew between star-hub synchronized cards < 100 ps (typical) Connectors Analog SMB male (one for each single-ended input/output) Cable-Type: Cab-3f-xx-xx Trigger Input SMB male Cable-Type: Cab-3f-xx-xx Clock Input SMB male Cable-Type: Cab-3f-xx-xx Standard Multi Purpose I/O MMCX female (4 lines) Cable-Type: Cab-1m-xx-xx Option M2p.xxxx-DigSMB on extra bracket SMB male Cable-Type: Cab-3f-xx-xx Option M2p.xxxx.DigFX2 on extra bracket 40-pole half pitch (Hirose FX2) Cable-Type: Cab-d40-xx-xx

Environmental and Physical Details Dimension (Single Card) type 8 channel AWG or L x H x W: 168 mm (½ PCIe length) x 107 mm x 30 mm. Requires one additional slot right of M2p.65x3, M2p.65x8, M2p.654x or M2p.657x High power AWG the main card’s bracket, on „component side“ of the PCIe card. Dimension (all other single cards) L x H x W: 168 mm (½ PCIe length) x 107 mm x 20 mm (single slot width) Dimension (with -SH6tm or -SH16tm installed) Extends W by 1 slot right of the main card’s bracket, on „component side“ of the PCIe card. Dimension (with -SH6ex or -SH16ex installed) Extends L to 245 mm (¾ PCIe length) at the back of the PCIe card Dimension (with -DigSMB or -DigFX2 installed) Extends W by 1 slot left of the main card’s bracket, on „solder side“ of the PCIe card. Weight (M2p.59xx series) maximum 215 g Weight (M2p.65x0, M2p.65x1, M2p.65x6 series) maximum 195 g Weight (M2p.65x3, 65x8, 654x, 657x series) maximum 305 g Weight (Star-Hub Option -SH6ex, -SH6tm) including 6 sync cables 65 g Weight (Star-Hub Option -SH16ex, -SH16tm) including 16 sync cables 90 g Weight (Option -DigSMB) 50 g Weight (Option -DigFX2) 60 g Warm up time 10 minutes Operating temperature 0 °C to 40 °C Storage temperature -10 °C to 70 °C Humidity 10% to 90% PCI Express specific details PCIe slot type x4, Generation 1 PCIe slot compatibility (physical) x4, x8, x16 PCIe slot compatibility (electrical) x1, x2, x4, x8, x16 with Generation 1, Generation 2, Generation 3, Generation 4 Sustained streaming mode > 700 MB/s (measured with a chipset supporting a TLP size of 256 bytes, using PCIe x4 Gen1) (Card-to-System: M2p.59xx) Sustained streaming mode > 700 MB/s (measured with a chipset supporting a TLP size of 256 bytes, using PCIe x4 Gen1) (System-to-Card: M2p.65xx) Certification, Compliance, Warranty EMC Immunity Compliant with CE Mark EMC Emission Compliant with CE Mark Product warranty 5 years starting with the day of delivery Software and firmware updates Life-time, free of charge Power Consumption 3.3V 12V Total M2p.59x0, 59x1, 59x2 0.1 A 1.1 A 13.6 W M2p.59x3, 59x6, 59x8 0.1 A 1.5 A 18.4 W MTBF MTBF TBD hours

Clock Limitations and Bandwidth M2p.591x, M2p.592x, M2p.593x M2p.594x M2p.596x DN2.591-xx DN2.592-xx DN2.593-xx DN2.596-xx DN6.591-xx DN6.592-xx DN6.593-xx DN6.596-xx max internal clock (non-synchronized cards) 5 MS/s 20 MS/s 40 MS/s 80 MS/s 125 MS/s min internal clock (non-synchronized cards) 1 kS/s 1 kS/s 1 kS/s 1 kS/s 1 kS/s max internal clock (cards synchronized via star-hub) 5 MS/s 20 MS/s 40 MS/s 80 MS/s 125 MS/s min internal clock (cards synchronized via star-hub) 128 kS/s 128 kS/s 128 kS/s 128 kS/s 128 kS/s max direct external clock 5 MS/s 20 MS/s 40 MS/s 80 MS/s 125 MS/s min direct external clock 1 MS/s 1 MS/s 1 MS/s 1 MS/s 1 MS/s min direct external clock LOW time 25 ns 25 ns 4 ns 4 ns 4 ns min direct external clock HIGH time 25 ns 25 ns 4 ns 4 ns 4 ns -3 dB analog input bandwidth > 2.0 MHz > 10 MHz > 20 MHz > 40 MHz > 60 MHz -3 dB analog input bandwidth, digital filter de-activated > 2.5 MHz n.a. n.a. n.a. n.a. R MS Noise Level (Zero Noise), typical figures M2p.591x, DN2.591-xx, DN6.591-xx digital filtering active Input Range ±200 mV ±500 mV ±1 ±2 V ±5 V ±10 V Voltage resolution 6.1 µV 15.3 µV 30.5 µV 61.0 µV 152.6 µV 305.2 µV 50 Ω <1.5 LSB <10 µV <1.2 LSB <19 µV <1.0 LSB <31 µV <3.0 LSB <183 µV <1.6 LSB <245 µV <1.2 LSB <367 µV 1 MΩ <1.5 LSB <10 µV <1.2 LSB <19 µV <1.0 LSB <31 µV <3.0 LSB <183 µV <1.6 LSB <245 µV <1.2 LSB <367 µV M2p.592x, DN2.592-xx, DN6.592-xx Input Range ±200 mV ±500 mV ±1 ±2 V ±5 V ±10 V Voltage resolution 6.1 µV 15.3 µV 30.5 µV 61.0 µV 152.6 µV 305.2 µV 50 Ω <4.0 LSB <25 µV <2.6 LSB <40 µV <2.1 LSB <65 µV <4.3 LSB <263 µV <2.6 LSB <397 µV <2.1 LSB <641 µV 1 MΩ <4.5 LSB <28 µV <3.0 LSB <46 µV <2.5 LSB <107 µV <4.5 LSB <275 µV <3.0 LSB <458 µV <2.5 LSB <763 µV M2p.593x, DN2.593-xx, DN6.593-xx Input Range ±200 mV ±500 mV ±1 ±2 V ±5 V ±10 V Voltage resolution 6.1 µV 15.3 µV 30.5 µV 61.0 µV 152.6 µV 305.2 µV 50 Ω <6.0 LSB <37 µV <5.0 LSB <77 µV <4.5 LSB <138 µV <6.5 LSB <397 µV <5.0 LSB <763 µV <4.5 LSB <1.4 mV 1 MΩ <6.5 LSB <40 µV <5.0 LSB <77 µV <4.5 LSB <138 µV <6.5 LSB <397 µV <5.0 LSB <763 µV <4.5 LSB <1.4 mV M2p.594x Input Range ±200 mV ±500 mV ±1 ±2 V ±5 V ±10 V Voltage resolution 6.1 µV 15.3 µV 30.5 µV 61.0 µV 152.6 µV 305.2 µV 50 Ω <7.0 LSB <43 µV <5.5 LSB <85 µV <4.5 LSB <138 µV <7.5 LSB <458 µV <5.5 LSB <840 µV <4.5 LSB <1.4 mV 1 MΩ <7.5 LSB <46 µV <5.8 LSB <89 µV <4.5 LSB <138 µV <7.7 LSB <470 µV <5.8 LSB <886 µV <4.5 LSB <1.4 mV M2p.596x, DN2.596-xx, DN6.596-xx Input Range ±200 mV ±500 mV ±1 ±2 V ±5 V ±10 V Voltage resolution 6.1 µV 15.3 µV 30.5 µV 61.0 µV 152.6 µV 305.2 µV 50 Ω <9.0 LSB <55µV <6.8 LSB <104 µV <5.5 LSB <168 µV <9.0 LSB <550 µV <6.8 LSB <1.1 mV <5.5 LSB <1.7 mV 1 MΩ <9.5 LSB <58µV <7.1 LSB <109 µV <5.5 LSB <168 µV <9.5 LSB <580 µV <7.1 LSB <1.1 mV <5.5 LSB <1.7 mV Dynamic Parameters, typical figures M2p.591x, DN2.591-xx, DN6.591-xx digital filtering active Test - sampling rate 5 MS/s Input Range ±200 mV ±500 mV ±1 V ±2 V Test Signal Frequency 20 kHz 1 MHz 20 kHz 1 MHz 20 kHz 1 MHz 20 kHz 1 MHz SNR (typ) ≥ 83.5 dB ≥ 82.8 dB ≥ 85.0 dB ≥ 84.9 dB ≥ 86.2 dB ≥ 85.7 dB n.a. n.a. THD (typ) (≤ 84.4 dB) ≤ -93.5 dB (≤ 86.3 dB) ≤ -93.1 dB (≤ 86.9 dB) ≤ -91.8 dB n.a. n.a. SFDR (typ), excl. harm. ≥ 103.0 dB ≥ 103.0 dB ≥ 104.0 dB ≥ 107.0 dB ≥ 103.0 dB ≥ 107.0 dB n.a. n.a. ENOB (based on SNR) ≥ 13.6 LSB ≥ 13.4 LSB ≥ 13.8 LSB ≥ 13.8 LSB ≥ 14.0 LSB ≥ 13.9 LSB n.a. n.a. ENOB (based on SINAD) ≥ 13.1 LSB ≥ 13.4 LSB ≥ 13.4 LSB ≥ 13.7 LSB ≥ 13.6 LSB ≥ 13.8 LSB n.a. n.a. M2p.591x, DN2.591-xx, DN6.591-xx digital filtering active Test - sampling rate 3 MS/s 1 MS/s 500 kS/s 200 kS/s Input Range ±200 mV ±1 V ±200 mV ±1 V ±200 mV ±1 V ±200 mV ±1 V Test Signal Frequency 20 kHz 20 kHz 20 kHz 20 kHz Input bandwidth due to digital filter 1.2 MHz 400 kHz 200 klHz 80 kHz SNR (typ) ≥ 85.3 dB ≥ 86.6 dB ≥ 87.2 dB ≥ 89.1 dB ≥ 86.2 dB ≥ 89.7 dB ≥ 86.4 dB ≥ 89.4 dB THD (typ) (≤ 88.9 dB) (≤ -88.5 dB) (≤ 86.4 dB) (≤ -88.6 dB) (≤ 86.9 dB) (≤ -90.8 dB) (≤ 89.7 dB) (≤ -93.8 dB) SFDR (typ), excl. harm. ≥ 103.1 dB ≥ 103.6 dB ≥ 102.8 dB ≥ 105.6 dB ≥ 103.1 dB ≥ 103.1 dB ≥ 103.1 dB ≥ 103.5 dB ENOB (based on SNR) ≥ 13.9 LSB ≥ 14.1 LSB ≥ 14.2 LSB ≥ 14.5 LSB ≥ 14.0 LSB ≥ 14.6 LSB ≥ 14.1 LSB ≥ 14.6 LSB ENOB (based on SINAD) ≥ 13.5 LSB ≥ 13.7 LSB ≥ 13.6 LSB ≥ 14.0 LSB ≥ 13.6 LSB ≥ 14.2 LSB ≥ 13.8 LSB ≥ 14.3 LSB

(20 kHz measurements are missing the correct bandpass filter and therefore show a larger THD that is coming from the generator) M2p.592x, DN2.592-xx, DN6.592-xx Test - sampling rate 20 MS/s Input Range ±200 mV ±500 mV ±1 V ±2 V Test Signal Frequency 1 MHz n.a. 1 MHz n.a. 1 MHz n.a. 1 MHz n.a. SNR (typ) ≥ 77.2 dB n.a. ≥ 79.8 dB n.a. ≥ 81.0 dB n.a. ≥ 75.0 dB n.a. THD (typ) ≤ 92.5 dB n.a. ≤ -92.8 dB n.a. ≤ -89.5 dB n.a. ≤ -76.5 dB n.a. SFDR (typ), excl. harm. ≥ 103.0 dB n.a. ≥ 103.0 dB n.a. ≥ 105.0 dB n.a. ≥ 93.0 dB n.a. ENOB (based on SNR) ≥ 12.5 LSB n.a. ≥ 13.0 LSB n.a. ≥ 13.2 LSB n.a. ≥ 12.2 LSB n.a. ENOB (based on SINAD) ≥ 12.5 LSB n.a. ≥ 13.0 LSB n.a. ≥ 13.1 LSB n.a. ≥ 11.8 LSB n.a. M2p.593x, DN2.593-xx, DN6.593-xx Test - sampling rate 40 MS/s Input Range ±200 mV ±500 mV ±1 ±2 V Test Signal Frequency 1 MHz 10 MHz 1 MHz 10 MHz 1 MHz 10 MHz 1 MHz 10 MHz SNR (typ) ≥ 73.0 dB ≥ 72.6 dB ≥ 74.6 dB ≥ 74.4 dB ≥ 75.3 dB ≥ 75.3 dB ≥ 71.9 dB ≥ 71.8 dB THD (typ) ≤ -87.8 dB ≤ -67.0 dB ≤ -89.0 dB ≤ -67.0 dB ≤ -86.1 dB ≤ -67.2 dB ≤ -79.0 dB ≤ -67.2 dB SFDR (typ), excl. harm. ≥ 98.3 dB ≥ 96.5 dB ≥ 98.8 dB ≥ 99.5 dB ≥ 101.0 dB ≥ 100.0 dB ≥ 81.7 dB ≥ 91.3 dB ENOB (based on SNR) ≥ 11.8 LSB ≥ 11.8 LSB ≥ 12.1 LSB ≥ 12.0 LSB ≥ 12.2 LSB ≥ 12.2 LSB ≥ 11.7 LSB ≥ 11.6 LSB ENOB (based on SINAD) ≥ 11.8 LSB ≥ 10.7 LSB ≥ 12.1 LSB ≥ 10.7 LSB ≥ 12.2 LSB ≥ 10.8 LSB ≥ 11.6 LSB ≥ 10.7 LSB M2p.594x Test - sampling rate 80 MS/s Input Range ±200 mV ±500 mV ±1 ±2 V Test Signal Frequency 1 MHz 10 MHz 1 MHz 10 MHz 1 MHz 10 MHz 1 MHz 10 MHz SNR (typ) ≥ 70.6 dB ≥ 70.5 dB ≥ 72.9 dB ≥ 72.8 dB ≥ 74.2 dB ≥ 74.2 dB ≥ 69.8 dB ≥ 69.8 dB THD (typ) ≤ -87.3 dB ≤ -76.9 dB ≤ -86.6 dB ≤ -76.3 dB ≤ -84.8 dB ≤ -70.1 dB ≤ -79.0 dB ≤ -77.9 dB SFDR (typ), excl. harm. ≥ 97.5 dB ≥ 105.0 dB ≥ 101.0 dB ≥ 104.0 dB ≥ 100.0 dB ≥ 100.0 dB ≥ 96.9 dB ≥ 96.6 dB ENOB (based on SNR) ≥ 11.4 LSB ≥ 11.4 LSB ≥ 11.8 LSB ≥ 11.8 LSB ≥ 12.0 LSB ≥ 12.0 LSB ≥ 11.2 LSB ≥ 11.2 LSB ENOB (based on SINAD) ≥ 11.4 LSB ≥ 11.3 LSB ≥ 11.8 LSB ≥ 11.5 LSB ≥ 12.0 LSB ≥ 11.1 LSB ≥ 11.2 LSB ≥ 11.2 LSB M2p.596x, DN2.596-xx, DN6.596-xx Test - sampling rate 125 MS/s Input Range ±200 mV ±500 mV ±1 V ±2 V Test Signal Frequency 1 MHz 10 MHz 40 MHz 1 MHz 10 MHz 40 MHz 1 MHz 10 MHz 40 MHz 1 MHz 10 MHz 40 MHz SNR (typ) ≥ 68.1 dB ≥ 66.2 dB ≥ 65.5 dB ≥ 70.5 dB ≥ 69.9 dB ≥ 68.7 dB ≥ 73.3 dB ≥ 72.7 dB ≥ 71.5 dB ≥ 67.8 dB ≥ 65.8 dB ≥ 65.1 dB THD (typ) ≤ -81.5 dB ≤ -74.5 dB ≤ -53.7 dB ≤ -82.5 dB ≤ -77.6 dB ≤ -55.3 dB ≤ -83.3 dB ≤ -68.9 dB ≤ -57.3 dB ≤ -78.0 dB ≤ -75.6 dB ≤ -53.7 dB SFDR (typ), excl. harm. ≥ 95.0 dB ≥ 93.4 dB ≥ 92.3 dB ≥ 97.5 dB ≥ 96.8 dB ≥ 94.0 dB ≥ 98.5 dB ≥ 98.1 dB ≥ 96.4 dB ≥ 91.5 dB ≥ 89.0 dB ≥ 89.0 dB ENOB (based on SNR) ≥ 11.0 LSB ≥ 10.7 LSB ≥ 10.6 LSB ≥ 11.4 LSB ≥ 11.3 LSB ≥ 11.1 LSB ≥ 11.8 LSB ≥ 11.8 LSB ≥ 11.6 LSB ≥ 11.0 LSB ≥ 10.6 LSB ≥ 10.5 LSB ENOB (based on SINAD) ≥ 11.0 LSB ≥ 10.6 LSB ≥ 8.6 LSB ≥ 11.4 LSB ≥ 11.1 LSB ≥ 8.9 LSB ≥ 11.7 LSB ≥ 11.0 LSB ≥ 9.2 LSB ≥ 10.9 LSB ≥ 10.6 LSB ≥ 8.6 LSB Dynamic parameters are measured at ±1 V input range (if no other range is stated) and 50Ω termination with the samplerate specified in the table. Measured parameters are averaged 20 times to get typical values. Test signal is a pure sine wave generated by a signal generator and a matching bandpass filter. Amplitude is >99% of FSR. SNR and RMS noise parameters may differ depending on the quality of the used PC. SNR = Signal to Noise Ratio, THD = Total Harmonic Distortion, SFDR = Spurious Free Dynamic Range, SINAD = Signal Noise and Dis- tortion, ENOB = Effective Number of Bits.

Hardware block diagram Order Information The card is delivered with 512 MSample on-board memory and supports standard acquisition (Scope), FIFO acquisition (streaming), Multiple Recording, Gated Sampling, ABA mode and Timestamps. Operating system drivers for Windows/Linux 32 bit and 64 bit, examples for C/C++, LabVIEW (Windows), MATLAB (Windows and Linux), IVI, .NET, Delphi, Java, Python and a Base license of the oscilloscope software SBench 6 are included. Adapter cables are not included. Please order separately! PCI Express x4 Order no. A/D Resolution Standard mem Single-Ended Inputs Differential Inputs M2p.5911-x4 16 Bit 512 MSample 2 channels 5 MS/s 2 channels 5 MS/s M2p.5912-x4 16 Bit 512 MSample 4 channels 5 MS/s 2 channels 5 MS/s M2p.5916-x4 16 Bit 512 MSample 4 channels 5 MS/s 4 channels 5 MS/s M2p.5913-x4 16 Bit 512 MSample 8 channels 5 MS/s 4 channels 5 MS/s M2p.5920-x4 16 Bit 512 MSample 1 channel 20 MS/s 1 channel 20 MS/s OEM only M2p.5921-x4 16 Bit 512 MSample 2 channels 20 MS/s 2 channels 20 MS/s M2p.5922-x4 16 Bit 512 MSample 4 channels 20 MS/s 2 channels 20 MS/s M2p.5926-x4 16 Bit 512 MSample 4 channels 20 MS/s 4 channels 20 MS/s M2p.5923-x4 16 Bit 512 MSample 8 channels 20 MS/s 4 channels 20 MS/s M2p.5930-x4 16 Bit 512 MSample 1 channel 40 MS/s 1 channel 40 MS/s OEM only M2p.5931-x4 16 Bit 512 MSample 2 channels 40 MS/s 2 channels 40 MS/s M2p.5932-x4 16 Bit 512 MSample 4 channels 40 MS/s 2 channels 40 MS/s M2p.5936-x4 16 Bit 512 MSample 4 channels 40 MS/s 4 channels 40 MS/s M2p.5933-x4 16 Bit 512 MSample 8 channels 40 MS/s 4 channels 40 MS/s M2p.5940-x4 16 Bit 512 MSample 1 channel 80 MS/s 1 channel 80 MS/s M2p.5941-x4 16 Bit 512 MSample 2 channels 80 MS/s 2 channels 80 MS/s M2p.5942-x4 16 Bit 512 MSample 4 channels 80 MS/s 2 channels 80 MS/s M2p.5946-x4 16 Bit 512 MSample 4 channels 80 MS/s 4 channels 80 MS/s M2p.5943-x4 16 Bit 512 MSample 8 channels 80 MS/s 4 channels 80 MS/s M2p.5960-x4 16 Bit 512 MSample 1 channel 125 MS/s 1 channel 125 MS/s M2p.5961-x4 16 Bit 512 MSample 2 channels 125 MS/s 2 channels 125 MS/s M2p.5962-x4 16 Bit 512 MSample 4 channels 125 MS/s 2 channels 125 MS/s M2p.5966-x4 16 Bit 512 MSample 4 channels 125 MS/s 4 channels 125 MS/s M2p.5968-x4 16 Bit 512 MSample 4 channels 125 MS/s 4 channels 125 MS/s 8 channels 80 MS/s

M2p.59xx-x4 - 16 bit general purpose DigitizerOptions Order no. Option M2p.xxxx-SH6ex (1) Synchronization Star-Hub for up to 6 cards incl. cables, only one slot width, card length 245 mm M2p.xxxx-SH6tm (1) Synchronization Star-Hub for up to 6 cards incl. cables, two slots width, standard card length M2p.xxxx-SH16ex (1) Synchronization Star-Hub for up to 16 cards incl. cables, only one slot width, card length 245 mm M2p.xxxx-SH16tm (1) Synchronization Star-Hub for up to 16 cards incl. cables, two slots width, standard card length M2p.xxxx-DigFX2 16 additional multi-purpose I/O lines on separate slot bracket, FX2 connector (incl. Cab-d40-idc-100) M2p.xxxx-DigSMB 16 additional multi-purpose I/O lines, 10 on separate slot bracket, 6 internal connectors M2p-upgrade Upgrade for M2p.xxxx: Later installation of options Star-Hub or Dig. Services Order no. Recal Recalibration at Spectrum incl. calibration protocol Cables Order no. for Connections Length to BNC male to BNC female to SMA male to SMA female to SMB female Analog/Clock-In/Trig-In 80 cm Cab-3f-9m-80 Cab-3f-9f-80 Cab-3f-3mA-80 Cab-3f-3fA-80 Cab-3f-3f-80 /Option DigSMB Analog/Clock-In/Trig-In 200 cm Cab-3f-9m-200 Cab-3f-9f-200 Cab-3f-3mA-200 Cab-3f-3fA-200 Cab-3f-3f-200 /Option DigSMB Probes (short) 5 cm Cab-3f-9f-5 Clk-Out/Trig-Out/Extra 80 cm Cab-1m-9m-80 Cab-1m-9f-80 Cab-1m-3mA-80 Cab-1m-3fA-80 Cab-1m-3f-80 Clk-Out/Trig-Out/Extra 200 cm Cab-1m-9m-200 Cab-1m-9f200 Cab-1m-3mA-200 Cab-1m-3fA-200 Cab-1m-3f-200 Information The standard adapter cables are based on RG174 cables and have a nominal attenuation of 0.3 dB/m at 100 MHz. to 2x20 pole IDC to 40 pole FX2 M2p.xxxx-DigFX2 100 cm Cab-d40-idc-100 Cab-d40-d40-100 Amplifiers Order no. Bandwidth Connection Input Impedance Coupling Amplification SPA.1412 (2) 200 MHz BNC 1 MOhm AC/DC x10/x100 (20/40 dB) SPA.1411 (2) 200 MHz BNC 50 Ohm AC/DC x10/x100 (20/40 dB) SPA.1232 (2) 10 MHz BNC 1 MOhm AC/DC x100/x1000 (40/60 dB) SPA.1231 (2) 10 MHz BNC 50 Ohm AC/DC x100/x1000 (40/60 dB) Information External Amplifiers with one channel, BNC/SMA female connections on input and output, manually adjustable offset, man- ually switchable settings. An external power supply for 100 to 240 VAC is included. Please be sure to order an adapter cable matching the amplifier connector type and matching the connector type for your A/D card input. Software SBench6 Order no. SBench6 Base version included in delivery. Supports standard mode for one card. SBench6-Pro Professional version for one card: FIFO mode, export/import, calculation functions SBench6-Multi Option multiple cards: Needs SBench6-Pro. Handles multiple synchronized cards in one system. Volume Licenses Please ask Spectrum for details. Software Options Order no. SPc-RServer Remote Server Software Package - LAN remote access for M2i/M3i/M4i/M4x/M2p cards SPc-SCAPP Spectrum’s CUDA Access for Parallel Processing - SDK for direct data transfer between Spectrum card and CUDA GPU. Includes RDMA activation and examples. Signed NDA needed for access. (1) : Just one of the options can be installed on a card at a time. (2) : Third party product with warranty differing from our export conditions. No volume rebate possible. Technical changes and printing errors possible SBench, digitizerNETBOX and generatorNETBOX are registered trademarks of Spectrum Instrumentation GmbH. Microsoft, Visual C++, Windows, Windows 98, Windows NT, Window 2000, Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10 are trademarks/registered trademarks of Microsoft Corporation. LabVIEW, DASYLab, Diadem and LabWindows/CVI are trademarks/registered trademarks of National Instruments Corporation. MATLAB is a trademark/registered trademark of The Mathworks, Inc. Delphi and C++Builder are trademarks/registered trademarks of Embarcadero Technologies, Inc. Keysight VEE, VEE Pro and VEE OneLab are trademarks/registered trademarks of Keysight Technologies, Inc. FlexPro is a registered trademark of Weisang GmbH & Co. KG. PCIe, PCI Express and PCI-X and PCI-SIG are trademarks of PCI-SIG. LXI is a registered trademark of the LXI Consortium. PICMG and CompactPCI are trademarks of the PCI Industrial Computation Manufacturers Group. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Intel and Intel Core i3, Core i5, Core i7, Core i9 and Xeon are trademarks and/or registered trademarks of Intel Corporation. AMD, Opteron, Sempron, Phenom, FX, Ryzen and EPYC are trademarks and/or registered trademarks of Advanced Micro Devices. NVIDIA, CUDA, GeForce, Quadro and Tesla are trademarks/registered trademarks of NVIDIA Corporation. (c) Spectrum GmbH 11